• Physical Therapy Rehabilitation Science
• /
• 제11권4호
• /
• pp.421-429
• /
• 2022

Objective: The purpose of this study was to compare and analyze the effects of arch support taping on static balance, static/dynamic foot contact area, and ground reaction force during walking according to the types of elastic tapes with mechanical elasticity differences. Design: Cross-sectional study Methods: Twenty-six participants selected for flexible flat feet through the navicular drop test were randomly assigned to non-taping, Dynamic-taping, and Mechano-taping conditions. Static balance and foot contact area were compared in the standing posture according to arch support taping conditions, and foot contact area and ground reaction force were compared during walking. Results: There was no significant difference in static balance according to the taping condition in the standing position, but the foot contact area in the Mechano-taping condition showed a significant decrease compared to the non-taping condition (p<0.05). The foot contact area during walking significantly decreased in the Dynamic-taping and Mechano-taping conditions (p<0.05), but there was no significant difference between the ground reaction force. Conclusions: Based on the results of this study, it was confirmed that among the types of elastic taping, arch support taping using dynamic taping and Mechano-taping has the effect of supporting the arch with high elastic recovery. Any type of elastic tape can be used for arch alignment in flexible flat foot.

• Asian Journal of Business Environment
• /
• 제14권1호
• /
• pp.23-30
• /
• 2024

Purpose: The purpose of this research is to explore the macroeconomic model through both static and dynamic equations. The primary objective of this study is to investigate the variations in the elasticity of substitution across changing economic variables within the framework of the Allen-Uzawa production functions. Research, design, data and methodology: The data were drawn from the World Bank's annual central statistical office database from 2010 to 2021 in the United States of America. The level of expenditures and of the public finance sector, macroeconomic data like output, inflation rates, and labor are examined. Results: This study demonstrates the interaction of two equations, clarifying that the macroeconomic model is practical to determining the stability of both static and dynamic equation systems analytically. The Allen-Uzawa equations allow for the verification of macroeconomic model properties, and study results demonstrate an increase in the range of capital uses as a form of mechanization. A constant elasticity of substitution function is derived from the macroeconomic variables. Conclusion: The macroeconomic model, though the analysis of the static and dynamic Allen - Uzawa model, not only facilitates the examination of long-term trends in crucial endogenous variables but also overcomes challenges commonly associated with other mathematical methods. Overall, the analysis promotes economic growth, investment, and employment. The levels of expenditures and the public finance sector, along with macroeconomic data such as output, inflation rates, and labor, are examined.

• 전산구조공학
• /
• 제27권2호
• /
• pp.15-19
• /
• 2014

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1998년도 하계 학술대회 논문집
• /
• pp.241-248
• /
• 1998

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1985년도 하계학술회의논문집
• /
• pp.271-272
• /
• 1985

• 소음진동
• /
• 제11권1호
• /
• pp.36-40
• /
• 2001

In this paper, an integrated system for dynamic analysis and optimal design of engine mount systems is presented. The system can simulate static and dynamic behaviors of engine mount systems and optimize design parameters such as mount stiffness, mounting locations with desired design targets of frequency or displacement. A FF-engine with an automatic transmission is used to demonstrate the analysis and optimal design capabilities of the proposed design system.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.715-721
• /
• 2010

This paper deals with the design and characteristic analysis of electro-magnet/permanent-magnet (EM-PM) hybrid levitation and propulsion device for high-speed magnetically levitated (maglev) vehicle. The machine requires PMs with high coercive force in order to levitate the vehicle by only PMs, and propulsion force is supplied by long-stator linear synchronous motor (LSM). The advantages of this configuration are an increasing levitation airgap length and decreasing total weight of the vehicle, because of the zero-power levitation control. Several design considerations such as machine structure, manufacturing, and control strategy are described. Moreover, the levitation and propulsion device for high-speed maglev vehicle has been designed and analyzed usign the electromagnetic circuit and FE analysis. In order to verify the design scheme and feasibility of maglev application, 3-DOF static force test set is implemented and tested. The obtained experimental data using the static tester shows the validity of the design and analysis approaches.

• 동력기계공학회지
• /
• 제20권4호
• /
• pp.19-25
• /
• 2016

It is needed to use the gait training system for the rehabilitation of the disabled and old people. In this study, a gait training system of turn roller type is proposed for the purpose of helping the rehabilitation. A driving mechanism with the turn roller is designed by using the RecurDyn which is the dynamic analysis program. RecurDyn is used to analyze the dynamic behavior of the gait training system. The static load analysis is carried out to investigate the safety of this system. From the operating test of this system, it is noted that the driving error is little and the load capacity is 130 kgf.

• 한국지반공학회지:지반
• /
• 제14권5호
• /
• pp.173-180
• /
• 1998

본 논문은 연약한 기초지반위의 토목섬유 보강제방의 2차원 안정해석을 위한 설계도표를 제시한다. 반복계산을 수행하기 위하여 보강제방의 요구되어지는 안전율에 필요한 보강재의 인장력을 산정하는 프로그램이 개발되었으며, 이 프로그램은 여러개의 토층과 토질로 이루어진 상황에도 사용될 수 있다. 도식화된 단면에 대하여 많은 계산결과들이 만들어 졌으며, 그 결과들로서 설계도 I를 만들었으며, 정적인 경우와 지진하중을 고려할 경우에도 적용시킬 수 있다. 예비설계단계에서 이러한 도표들을 이용하여 보강제방에 대한 비교적 정확한 보강재의 인장력을 근사적으로 구할 수 있으며, 실시설계단계에서는 개발된 프로그램에 의하여 정확한 결과를 산정할 수 있다.

• 대한기계학회논문집A
• /
• 제32권10호
• /
• pp.882-889
• /
• 2008

A humanoid is a robot with its overall appearance based on that of the human body. When the humanoid moves or walks, dynamic forces act on the body structure. Although the humanoid keeps the balance by using a precise control, the dynamic forces generate unexpected deformation or vibration and cause difficulties on the control. Generally, the structure of the humanoid is designed by the designer's experience and intuition. Then the structure can be excessively heavy or fragile. A humanoid design scenario for a systematic design is proposed to reduce the weight of the structure while sufficient strength is kept. Lower parts of the humanoid are selected to apply the proposed design scenario. Multi-body dynamics is employed to calculate the external dynamic forces on the parts and structural optimization is carried out to design the lower parts. Because structural optimization using dynamic forces directly is fairly difficult, linear dynamic response structural optimization using equivalent static loads is utilized. Topology and shape optimizations are adopted for two steps of initial and detailed designs, respectively. Various commercial software systems are used for analysis and optimization. Improved designs are obtained and the design results are discussed.