• The Journal of Sustainable Design and Educational Environment Research
• /
• v.5 no.2
• /
• pp.53-66
• /
• 2006

Recent color plans in school buildings are made by experts through public offerings for prizes for designs etc in relatively many cases. But it is necessary to review if such color plans are actually well conform to students' emotions and what trend the color plans made as such have. Therefore, this study examined and analyzed the exterior colors of the school buildings planned by public offerings for prizes for designs and reviewed the result comparing to the color preferences of students that had already been studied to figure out the differences between existing theories and the realities. And it was examined what differences were existing in the trends of color plans and color images examined between each of school levels. The result of the study compared to theories is as follows. First, when the color distributions were reviewed for each school level, it could be confirmed that the overall distributions moved from Y category to B category and whereas warm colors were more widely distributed and the number of colors were greater compared to cold colors in case of elementary schools, the distributions of warm colors gradually decreased as school level moves to high schools. Second, the color use distributions of elementary school students were revealed to be more diversified than middle and high school students and also the number of colors used was 9.5 in average in elementary school and middle schools and high schools were similar to each other with average 5.86 colors in middle schools and 6.33 colors in high schools showing a little differences in color use distributions among school levels of elementary schools, middle schools and high schools. Third, in case of elementary schools, except main colors, both of subsidiary colors and emphasizing colors had the distributions of warm colors of R, YR, Y categories and cold colors of B, PB categories and this is also consistent with the results of existing research results indicating that low grade students prefor for warm colors and high grade students prefer for cold colors. Fourth, in case of middle schools and high schools, although the distributions of warm colors decreased, the distributions of warm colors and cold colors were revealed to be similar. This is considered to be consistent with the existing research results indicating that girl students prefer for warm colors even if their ages go up. Fifth, as for the images of main colors, subsidiary colors and emphasizing colors resulted from the comparisons by solid color Image Scales and adjective Image Scales, first, in case of main colors, natural images or clear images appeared the most in all of elementary schools, middle schools and high schools indicating that basically calmness is emphasized with soft images rather than hard images and static images rather than dynamic images. Also, in case of subsidiary colors or emphasizing colors, cheerful images or splendid images are also seen to decrease as school level goes from elementary schools to high schools in adjective Image Scales and this is considered to reflect the color sentiment differences between children and juveniles based on ages.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.14 no.1
• /
• pp.55-61
• /
• 2008

The Taekwondo is the martial arts where possibility thousand Ul of history and the ancestor is put in with specific martial arts of our nation. Also it practiced with the self defense martial arts which rules over the body and a mind and it came, the country from crisis of imminent danger won a victory with the good state affair alcoholic beverage and it was come. The ancestors condition anger the Taekwondo where the soul is put in were born again with martial arts of the world and they became and the world-wide conference was adopted with the Olympic formal item which becomes the historian of of course sports and became the martial arts in the world-wide center. In like this features martial arts even from each country condition anger and the sports raises the phase of the country is racing with of course martial arts. Specially from China it makes the right shoe which is a Chinese martial arts with condition item and sports anger the features of the martial arts origination to do and there is a possibility of seeing the features which in the succession nose sleeping martial arts perforation defends it concentrates. The martial arts perforation character is letting in religion and philosophy thought of the Orient. Confucianism and Buddhism, it puts in the teaching of friendship thoughts and heaven and earth positive and negative principles, five lines and eight divination signs. Features of like this perforation our ancestors the positive and negative principles where the philosophy of the Orient is put in, there is a possibility of searching from life and the Taekwondo which it does with at five events together. With history of the ancestor it breathes together and all Taekwondo operation every one by one it puts in the thought of our ancestors as well. The some branch it tried to listen to the representative example which the feather holds hereupon in basic operation, the Taoist garment, the belt and width tax of Taekwondo. The flesh which is healthy in the spirit which is healthy holds the feather. Taekwondo Oh! as the true feelings one martial art which accomplishes the artificial flower of the dynamic thing and the static thing at end with the perforation essentially it is deep it will be able to confirm repeatedly fire tube characteristic.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.18 no.1
• /
• pp.128-141
• /
• 2005

Objective : This study was undertaken to investigate the effects of Eucommiae Cortex on the osteoporosis in ovariectomized rats. Materials and Methods : We used Sprague-Dawley female rats in 8-week-old. They were divided into three groups. Sample group was ovariectomized and administered with 10 mg/100 g/day Eucommiae Cortex extract solution for 10 weeks. Control group was ovariectomized and sham group was conducted by sham's operation. And control group and sham group were administered with normal saline as the same way. We measured rats's body and uterus weight and also measured the serum levels of Ca, phosphorus and ALP. We stained the specimens of rat's tibial bones with Goldner's modified Masson's Trichrome and then examined bone histomorphometry with Bioquant computer program of image analysis system. We measured the thickness of osteoid and callus as static parameters and measured bone volume and mineral apposition rate as dynamic parameters. We observed the expressions of RANKL and OPG mRNA of the tibial bone by RT-PCR. Results : The body weight was significantly (p<0.05) increased in control and sample groups compared with sham group, respectively. The uterus weight was significantly (p<0.05) decreased in control and sample group compared with sham group. In the change of Ca, phosphorus and ALP there were no significant changes among three groups. There were no significant changes of trabecula cortical and osteoid bones' thickness and volume. But trabecula mineral apposition rate (MAR) was significantly (p<0.05) increased in sham and sample group compared with control group. In the expression of RANKL mRNA, sample group was decreased compared with control group, and in that of OPG mRNA, sample group was increased compared with control group. Conclusion : This study shows that Eucommiae Cortex has the beneficial effects on bone histomorphometry and metabolism in the ovariectomized rats. We suggest that Eucommiae Cortex be useful for the treatment of osteoporosis.

• Structural Engineering and Mechanics
• /
• v.86 no.5
• /
• pp.607-619
• /
• 2023

This study, it was tried to evaluate the asphalt behavior under tensile loading conditions through indirect Brazilian and direct tensile tests, experimentally and numerically. This paper is important from two points of view. The first one, a new test method was developed for the determination of the direct tensile strength of asphalt and its difference was obtained from the indirect test method. The second one, the effects of particle size and loading rate have been cleared on the tensile fracture mechanism. The experimental direct tensile strength of the asphalt specimens was measured in the laboratory using the compression-to-tensile load converting (CTLC) device. Some special types of asphalt specimens were prepared in the form of slabs with a central hole. The CTLC device is then equipped with this specimen and placed in the universal testing machine. Then, the direct tensile strength of asphalt specimens with different sizes of ingredients can be measured at different loading rates in the laboratory. The particle flow code (PFC) was used to numerically simulate the direct tensile strength test of asphalt samples. This numerical modeling technique is based on the versatile discrete element method (DEM). Three different particle diameters were chosen and were tested under three different loading rates. The results show that when the loading rate was 0.016 mm/sec, two tensile cracks were initiated from the left and right of the hole and propagated perpendicular to the loading axis till coalescence to the model boundary. When the loading rate was 0.032 mm/sec, two tensile cracks were initiated from the left and right of the hole and propagated perpendicular to the loading axis. The branching occurs in these cracks. This shows that the crack propagation is under quasi-static conditions. When the loading rate was 0.064 mm/sec, mixed tensile and shear cracks were initiated below the loading walls and branching occurred in these cracks. This shows that the crack propagation is under dynamic conditions. The loading rate increases and the tensile strength increases. Because all defects mobilized under a low loading rate and this led to decreasing the tensile strength. The experimental results for the direct tensile strengths of asphalt specimens of different ingredients were in good accordance with their corresponding results approximated by DEM software.

• KSTLE International Journal
• /
• v.7 no.2
• /
• pp.27-34
• /
• 2006

Knudsen number is the ratio of molecular mean free path versus mm thickness and the criterion to determine the flow form. When its value is lower than 0.01, the flow can be assumed to has no slip boundary condition. And in the case that the value is between 0.01 and 10, then the flow has slip boundary condition at both the adjacent walls. The condition of the air flow between the rotating journal and top foil in the air foil bearing is determined by the rotating speed and load, and the Knudsen number is also varied by those values. Because the molecular mean free path is variable to the pressure and temperature, more exact formulation is necessary to understand and analyze the flow regime. In this study, the analysis considering Knudsen number formulated with those variables (pressure, temperature and mm thickness) was executed. The approximate value was examined using the equation to confirm whether the flow has the slip or no-slip boundary condition. From the analytic investigation, it was decided to range approximately 0.01 to 1.0 and the flow can be supposed to have the slip boundary condition. Under the condition of the slip flow, the static characteristics of the air foil bearing were examined using modified Reynolds equations. The results were compared with those considering no slip condition. It shows that the slip condition makes the flow decelerates and the load carrying capacity decreases compared with no slip condition. And as the bearing number and eccentricity ratio increase, the load carrying capacity also increased at both the cases. From this result, it can be supposed that the bearing torque also increases. In the analysis of the dynamic characteristics, the perturbed Knudsen number was taken into consideration. Because the Knudsen number is expressed as the terms of each variable, the perturbed equation can be simply derived. The results of both cases considering and not considering Knudsen number were compared each other. In the case of the direct terms of the stiffness and damping coefficients, the difference between both cases was little and increased as the bearing number and eccentricity ratio increased. And the cross terms have less or more differences.

• Earthquakes and Structures
• /
• v.15 no.6
• /
• pp.667-685
• /
• 2018

In eccentrically braced steel frames (EBFs), the links are fuse members which enter inelastic phase before other structure members and dissipate the seismic energy. Based on the force-based seismic design method, damages and plastic deformations are limited to the links, and the main structure members are required tremendous sizes to ensure elastic with limited or no damage. Force-based seismic design method is very common and is found in most design codes, it is unable to determine the inelastic response of the structure and the damages of the members. Nowadays, methods of seismic design are emphasizing more on performance-based seismic design concept to have a more realistic assessment of the inelastic response of the structure. Links use ordinary steel Q345 (the nominal yielding strength $f_y{\geq}345MPa$) while other members use high strength steel (Q460 $f_y{\geq}460MPa$ or Q690 $f_y{\geq}690MPa$) in eccentrically braced frames with high strength steel combination (HSS-EBFs). The application of high strength steels brings out many advantages, including higher safety ensured by higher strength in elastic state, better economy which results from the smaller member size and structural weight as well as the corresponding welding work, and most importantly, the application of high strength steel in seismic fortification zone, which is helpful to popularize the extensive use of high strength steel. In order to comparison seismic behavior between HSS-EBFs and ordinary EBFs, on the basis of experimental study, four structures with 5, 10, 15 and 20 stories were designed by PBSD method for HSS-EBFs and ordinary EBFs. Nonlinear static and dynamic analysis is applied to all designs. The loading capacity, lateral stiffness, ductility and story drifts and failure mode under rare earthquake of the designs are compared. Analyses results indicated that HSS-EBFs have similar loading capacity with ordinary EBFs while the lateral stiffness and ductility of HSS-EBFs is lower than that of EBFs. HSS-EBFs and ordinary EBFs designed by PBSD method have the similar failure mode and story drift distribution under rare earthquake, the steel weight of HSS-EBFs is 10%-15% lower than ordinary EBFs resulting in good economic efficiency.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2009

After a research on appearance diagnosis and fish, bird, horse, and turtle types, this study concluded as following. Appearance diagnosis is a technique that exams five jang organs by color and shape of eye, nose, mouth, and ear. Four HyungSang types-including fish, bird, horse and turtle types-are evaluated upon the external shape that are created while type of seed changes. Appearance diagnosis focuses on five jang organs. Four HyungSang types focus on external shape, but are eventually related to five jang organs. Thus, two different techniques possess a point in common; five jang organs. The assignment of nose, eye, ear and mouth to the Five elements varies between two techniques. On the viewpoint of formation, appearance diagnosis assigns them to metal-water-wood-fire-earth and movement, and four HyungSang types do to wood-fire-earth-metal-water and constitution. On the viewpoint of body/use and static/dynamic, appearance diagnosis assigns them to metal-water-wood-fire-earth and constitution, and four HyungSang types do to wood-fire-earth-metal-water and movement. If nose, eye, ear, and mouth are assigned by on four HyungSang types, which are based on external shape, the assignment can be utilized in diagnosis. If, however, they are assigned by appearance diagnosis, it can be focus on treatment. Five jang organs and six fu organs are affected by internal conditions because they are located inside of human body, while four HyungSang types are affected by external conditions because it deals with external shape. If a disease occurs in the developed part of the body, it would be difficult to be cured because four HyungSang types depend on external shapes.

• 한국노년학
• /
• v.29 no.4
• /
• pp.1261-1275
• /
• 2009

Age related decrease of muscle strength, balance, and gait abilities bring about physical inactivity in the elderly. Virtual reality (VR) training has been used successfully to rehabilitate functional balance and mobility in elderly subjects. This study was aimed at determining the effect of VR-based exercise programs by using a video game on the muscle strength, balance, and gait abilities in the elderly. 48 old people were randomly divided into two groups; VR-group (men: 11, women: 14, age: 68.42yrs) and control group (men: 10, women: 13, age: 67.58yrs). VR-group performed an exercise program twice a week for 8 weeks and control group had no intervention. The VR-based exercise program was composed of warm up(10 mins), VR-program(40 mins), and cool down(10mins). It was performed by playstation eyetoy play that provided visual and auditory feedback as well as movements of the upper and lower extremities. Muscle strengths of the knee and ankle were measured using manual muscle tester. Static balance was estimated using computerized posturography. Dynamic balance was measured by Timed up and go test (TUG), Functional reach test (FRT). 10m walk test and 6-min walk test were used to assess gait abilities. After the completion of the VR-exercise program, muscle strength, balance, and gait abilities were improved significantly (p<0.05). In conclusion, the VR-based exercise program showed improvement on the muscle strength, balance, and gait ability in the elderly. This exercise program is both effective and interesting for this age group.

• Journal of Korean Clinical Health Science
• /
• v.4 no.4
• /
• pp.662-670
• /
• 2016

Purpose. Because of a recent increase in use of soft contact lens at younger ages, in the present study, the correlation between corneal eccentricity and radius of curvature and fitting types of contact lens was investigated. Methods. The study evaluated the fitting status of targets through lens centration, push-up test, dynamic lag test and static lag test of lenses usually worn by 49 men and women (98eyes) in their 20s to 30s who put on soft contact lenses. After evaluation, the subjects were classified into 3 categories by fitting status(steep, aligment and flat). The radius of corneal curvature in the naked eyes was measured by using keratometer. Moreover the corneal eccentricity in the nasal side, temporal side, superior side and inferior side was measured by using the device capable of measuring the corneal eccentricity. Results. The radius of corneal curvature and corneal eccentricity of soft lenses worn by subjects were higher in the order of steep fitting and flat fitting, and the higher average corneal curvature radius and corneal eccentricity is intend to be more steep fitting(p=0.051, p=0.052). The corneal eccentricity showed a tendency to nasal fitting type at the higher eccentricity and temporal fitting type at the smaller eccentricity, statistically significant difference was observed(p<0.05). The study showed there were low correlation that nasal and temporal side at steep fitting, superior side at normal fitting and 4side(nasal, temporal, superior, inferior) at flat fitting, therefore when the corneal eccentricity changed the radius of corneal curvature also changed. The corneal eccentricity and the radius of corneal curvature showed statistically significant difference at 4side and each fitting types(p<0.05). Conclusions. The results of this study, the fitting status, of wearer are based on radius of corneal curvature and corneal eccentricity, and if lens fitting would be done considering that, it seems to be useful in a soft contact lens prescription.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.519-532
• /
• 2019

The objectives of this study were to evaluate the effects of shelling ratio and resin content on the properties of bamboo oriented strand board (BOSB) from betung (Dendrocalamus asper) and to determine the correlation between the results of dynamic and static bending tests. Strands were steam-treated at $126^{\circ}C$ for 1 h under 0.14 MPa pressure and followed by washing with 1% NaOH solution. Three-layer BOSB with the core layer perpendicular to the surface was formed with shelling ratios (face:core ratio) of 30:70; 40:60; 50:50; 60:40 and binded with 7% and 8% of phenol formaldehyde (PF) resin with the addition of 1% of wax. The evaluation of physical and mechanical properties of BOSB was conducted in accordance with the JIS A 5908:2003 standard and the results were compared with CSA 0437.0 standard for commercial OSB (Grade O-1). Non-destructive testing was conducted using Metriguard Model 239A Stress Wave Timer which has a wave propagation time from 1 to $9,999{\mu}s$ and a resolution of $1{\mu}s$. BOSB with 8% resin content showed better physical and mechanical properties than those with 7% resin content. The increase of the face layer ratio improved the strength of BOSB in parallel direction to the grain. The results suggested that shelling ratio of 50:50 could be used as a simple way to reduce PF resin requirements from 8% to 7% and to meet the requirements of CSA 0437.0 standard. The results of non-destructive and destructive tests showed a strong correlation, suggesting that non-destructive test can be used to estimate the bending properties of BOSB.