• KIISE Transactions on Computing Practices
• /
• v.22 no.6
• /
• pp.278-283
• /
• 2016

Due to explosive increase in the amount of data produced recently, cloud storage system is required to offer high and stable performance. However, VM (Virtual Machine) migration may result in lowered storage service performance. Especially, in an environment where the host-side flash cache is used in a cloud system, the existing warmed up cache is lost and the problematic cold start begins at a new cache due to a VM migration. In this paper, we first demonstrate and analyze the cold start problem and then propose Cachemior (Cache migrator) which enables efficient hot start of the flash cache.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.3
• /
• pp.59-72
• /
• 2021

Research in which an individual's entrepreneurial spirit contributes to the country's economic development through revitalization of entrepreneurship is being actively conducted, but studies related to individual satisfaction or life satisfaction are still insufficient. This study aims to clarify the influence of young adults' entrepreneurial spirit on their life satisfaction and at the same time verify the mediating effect of self-efficacy and self-determination. In addition, an empirical analysis was conducted on 511 young people to reveal the effectiveness of participation in government start-up support projects. The research results are as follows. First, the entrepreneurial spirit had a positive effect on the life satisfaction of young people. Second, self-determination and self-efficacy played a role in mediating the relationship between entrepreneurship and life satisfaction. Finally, participation in start-up support projects did not show a statistically significant moderating effect. This study is expected to provide a clue that life satisfaction can act as a major variable in the impact of entrepreneurship on entrepreneurship. It also implies that the performance of the government start-up support project should be considered not only about the quantitative performance such as sales and employment effect, but also the qualitative performance such as personal life satisfaction.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.6
• /
• pp.71-86
• /
• 2023

Although starting a business plays a key role in strengthening national competitiveness and creating jobs, it is recognized as a risky choice. Failure to start a business can result in a wide range of negative effects, such as loss of personal wealth as well as deterioration of national competitiveness. This study considers startups that have reached a level of sustainable growth by achieving performance above the minimum profitability and sales standards for KOSDAQ listing, or achieved EXIT through sale or listing, as successful startups. based on the practical experiences of 23 successful entrepreneurs and Based on perception, the importance and priorities of startup success factors were derived through stratification analysis (Analytic Hierarchy Process, AHP), and interviews were conducted. In particular, using the ERIS model, we comprehensively analyze various variables of a start-up by considering the four elements of the entrepreneur, resources, industry, and strategy, and examine the changes and importance of success factors according to the characteristics of each growth stage of the start-up. As a goal, we specifically identified the challenges and opportunities faced by entrepreneurs at each stage. As a result of the study, the order of importance of the top factors of success factors in the start-up period was found to be the entrepreneur, resources, industry, and strategy. In particular, the importance of the entrepreneur's entrepreneurship spirit, special capabilities, general capabilities, and human resources was emphasized. The order of importance of the top factors of success factors during the growth period was found in the following order: entrepreneur, resources, industry, and strategy. In particular, the importance of general capabilities, entrepreneurship, and human and organizational resources was emphasized. This study is significant in that it analyzes startup success factors from the perspective of successful entrepreneurs and provides useful insights and directions to entrepreneurs and policy makers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.73-80
• /
• 2005

This paper addresses a newly proposed start-up method of the HAUSAT-2 momentum wheel. The HAUSAT-2 is a 25kg class nanosatellite which is stabilized to earth pointing by 3-axis active control method. A momentum wheel performs two functions. It provides a pitch-axis momentum bias while measuring satellite pitch and roll attitude. Pitch control is accomplished in the conventional way by driving a momentum wheel in response to pitch attitude errors. Precession control and nutation damping are provided by driving the pitch axis magnetic torquer. A momentum wheel is nominally spinning at a particular rate and changes speed. This simulation study investigates the feasibility and performance of a proposed strategy for starting-up the wheel. A proposed strategy to start-up the wheel shows that a pitch momentum wheel can be successfully started-up to its nominal speed from rest and be stabilized to nadir pointing.

• Journal of Hydrogen and New Energy
• /
• v.32 no.5
• /
• pp.315-323
• /
• 2021

The air-cooled proton exchange membrane fuel cells (PEMFC) stacks, which is widely used in small-sized PEMFC, have a problem in that durability is weaker than that of the water-cooled type. Because the cathode is open to the atmosphere and the structural problem of the air-cooled stack, which is difficult to maintain airtightness, is highly likely to form a hydrogen/air boundary during start-up/shut-down (SU/SD). Through the accelerated durability evaluation of the 20 W air-cooled PEMFC stack, the purpose of this study was to find out the cause of the degradation of the stack and to contribute to the improvement of the durability of the air-cooled PEMFC stack. In this study, it was possible to evaluate durability in a relatively short time by reducing 20-30% of initial performance by repeating SU/SD 1,000 to 1,200 times on an air-cooled PEMFC stack. After disassembling the stack, each cell was divided into two and the performance analysis showed that the electrode degradation was more severe in the anode outlet membrane electrode assembly (MEA), which facilitates air inflow as a whole, than in the inlet MEA. It was shown that the cathode Pt was dissolved/precipitated to deteriorate the polymer ionomer inside the membrane.

• The KIPS Transactions:PartA
• /
• v.16A no.5
• /
• pp.347-356
• /
• 2009

Precise branch prediction is a critical factor in the IPC Improvement of modern microprocessor architectures. In addition to the branch prediction accuracy, branch prediction delay have a profound impact on overall system performance as well. However, it tends to be overlooked when the architects design the branch predictor. To tolerate branch prediction delay, this paper proposes Early Start Prediction (ESP) technique. The proposed solution dynamically identifies the start instruction of basic block, called as Basic Block Start Address (BB_SA), and the solution uses BB_SA when predicting the branch direction, instead of branch instruction address itself. The performance of the proposed scheme can be further improved by combining short interval hiding technique between BB_SA and branch instruction. The simulation result shows that the proposed solution hides prediction latency, with providing same level of prediction accuracy compared to the conventional predictors. Furthermore, the combination with short interval hiding technique provides a substantial IPC improvement of up to 10.1%, and the IPC is actually same with ideal branch predictor, regardless of branch predictor configurations, such as clock frequency, delay model, and PHT size.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.66
• /
• pp.19-26
• /
• 2001

I propose the control chart pattern to provide a more comprehensive scheme for detecting process X and R shifts using individual observations in start-up process. It is important to automate the identification of special disturbances to facilitate real-time manufacturing. This papers formulates X-R charts for interpretation by artificial neural networks. In this papers, which uses the backpropagation algorithm, two samples are fed into the trained neural network to provide outputs ranging from 0 to 1. Simulation results sow that the performance of the proposed control chart using the neural network(NNCC) is quite promising. Using these NN charts, guidelines are given for detecting and classifying process X and R shifts.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.365-369
• /
• 2000

Methanogenic activity of granular sludge was monitored by specific methanogenic activity (SMA) assay and confocal laser scanning microscopy (CLSM) during start-up of a thermophilic UASB reactor. Autofluorescence by CLSM could visualize the methanogenic bacterial population inside sludge granules and its intensity was proportional to SMA. Considering the complex procedures of SMA measurement, fluorescence quantification by CLSM can be suggested as a routine technique measuring methanogenic activity in UASB granules.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.5-8
• /
• 2007

In this paper, numerical investigation has been carried out to study performance of methane autothermal reformer and dynamic behavior for light-off under various operating conditions. In order to simulate the given problems, numerical methods are incorporated using finite-volume method. In addition, porous medium approach is accepted because the catalytic phenomena occur in porous media. Also, start-up issue is significant in autothermal reformer although the reaction is marginally exothermic. Thus, in this study transient behavior has been also investigated to find out optimal operating conditions for start-up.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.103-111
• /
• 2001

During cold-start period, the reduction of exhaust emissions is a challenging task. To decrease harmful gaseous substances such as HC, it is necessary to realize a fast catalyst warm-up. In this study, the performance of dual pipe exhaust system have been carried out through different test mode. From measurement of gas temperature and HC concentration, the following conclusions were derived ; 1) Compared with single pipe, dual pipe exhaust system remarkably increase temperature of exhaust gas going through M.C.C(Main Catalytic Converter). 2) W.C.C.(Warm-up Catalytic Converter) also decreases HC emission. To reduce HC emission, it is helpful to use W.C.C. as well as dual pipe exhaust system. 3) Using finite element method, it is shown that inner parts have much higher distribution of temperature than outer parts.