• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.79-87
• /
• 2012

While the youth unemployment problem has come to extend over a long period of time, because of the promotion policy of youth inauguration of an enterprise, many youths have been considering the start-up to be an alternative of the working. But it is said that many youths who had started an enterprise through the start-up education and related programs were unsuccessful mostly and dashed to get a job or became the delinquent borrower. This article will examine the actual conditions of the youth unemployment and the present conditions of promotion policy of the youth start-up, analyse problems as a result of this examination, propose alternatives of policy to revitalize the youth start-up.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.1007-1012
• /
• 2016

Induction motors are used widely in driving load of a fluid, such as a pump or a fan in the industry. Induction motor has been generated the voltage drop by the occurrence of a high current during startup. In addition, high start-up current can act as a mechanical stress on the shaft of the motor. So there is need a way to reduce the starting current. Soft start method is one of the many ways to reduce the starting current. This method uses silicon-controlled rectifiers(SCRs) for varying value of the voltage applied to the motor. There is a case for fixing or changing the thyristor firing angle to adjust the magnitude of the voltage. Starting power factor of induction motor is very low compared to the normal operation. Soft starting with the firing angle fixed needs to be considered a low power factor at startup. In this study, we compared the direct start characteristics and soft start characteristics considering the low power factor at the time of start-up. It was possible to confirm that the starting current and the voltage drop is present differently according to the firing angle.

• Journal of ILASS-Korea
• /
• v.23 no.4
• /
• pp.244-253
• /
• 2018

Recently, The ministry of Environment in korea have introduced Euro-6d temp which was strengthened at the same time as Europe. Small Light-duty passenger vehicles need the SCR system of after-treatment to meet enhanced emission regulations. However, SCR system has a low conversion efficiency in a low temperature less than 200 degree. In this study, the NOx conversion efficiency of SCR system was analyzed by installing a NOx sensors and a temperature sensors in a diesel vehicle. Also, in order to analyze the effect of the cold-start, the test was performed on the same RDE route and compared with the test of hot-start. As a result, SCR system has characteristics of low conversion efficiency under cold-start conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.427-434
• /
• 2000

The paper proposes a zero speed start-up scheme of direct rector controlled induction motor drive without any torque jerk. At standstill condition, a method is derived to calculate a stator flux with only stator current. The programmable 3-stage low pass filters with programmable time constants is used in order to solute the problem of integration for stator flux estimation in the direct vector control mode. Due to the time delay of 3-stage low pass filter, the status flux decreases rapidly and also the torque jerk occurs during the transition from standstill mode to the direct rector control mode. A feedforward control strategy of the stator flux is suggested to prevent the torque jerk at start-up. Through results of simulation and experiment with 32 bit DSP, the performance of the start-up scheme is verified.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.3
• /
• pp.151-158
• /
• 2018

Objective: In this study, we analyzed kinematic changes in the start phase of speed skating before and after physical training. Method: We introduced a new strength training program (2017) that was improved in terms of exercise type and intensity [%, one repetition maximum (1RM)] compared with the previous strength training program (2016). The new program was applied to elite speed skating athletes (four males and four females). To determine the improvement in starting technique, we recorded race images during the start phase of the 500-m race held in 2016 and 2017. The race images were collected using five high-speed cameras and kinematic characteristics of the start phase were analyzed by three-dimensional image analysis. Results: The 1RMs were improved by 11% on an average after the strength training. In 2017, records of four out of the eight athletes were shortened in terms of the initial lap time (100 m), and 500-m records were shortened in six athletes. The time to nine strokes was shortened in five athletes, and the ratio of correct kinetic chain was increased or maintained at a high level in six athletes. Conclusion: In this study, the new strength training program (2017), applied to elite speed skating athletes, showed a positive effect on starting technique and reduced the record times.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.323-327
• /
• 2009

To extract hydrogen for stack, fuels such as LPG and LNG were reformed in the fuel processor, which is comprised of desulfurizer, reformer, shift converter, CO remover and steam generator. All elements of fuel processor are integrated in a single package. Highly active catalysts (desulfurizing adsorbent, reforming catalyst, CO shift catalyst, CO removal catalyst) and the various burners were developed and evaluated in this study. The performance of the developed catalysts and the commercial ones was similar. 1 kW, 5 kW class fuel processor systems using the developed catalyst and burner showed efficiency of 75 %(LHV, for LNG). The start-up time of the 1 kW class fuel processor was less than 50 minutes and its volume including insulation was about 30 l. The start-up time of 3 kW and 5 kW class fuel processors with the volume of 90 l and 150 l, respectively, was about 60 minutes. In the case of LPG fuel, efficiency, volume and start-up time of 1kW class fuel processor showed 73 %(LHV), < 60 l and < 60 min, respectively. Advanced fuel processor showed more highly efficiency and shorter start-up time due to the improvement of heat exchanger and operating method. 1 kW and 3 kW class fuel processors have been evaluated for reliability and durability including with on/off test of developed catalysts and burner.

• Journal of Korean Physical Therapy Science
• /
• v.30 no.3
• /
• pp.23-30
• /
• 2023

Background: Flexion of cervical and lumbar joints is required when viewing a smartphone screen. Thus, these joints are overused, together with the surrounding joints and muscles. Long-term use of smartphones will cause changes in cervical and lumbar posture. The effect on forward head posture will vary, depending on the angle of cervical flexion start position in relation to the smartphone. This study investigated how forward head posture changes over time when using a smartphone at 20° and 40° cervical flexion start positions. Design: Cross-sectional study. Methods: Twenty-five subjects with a forward head posture angle of 35° or less participated in the study. A Forward Head Posture app on the participants' smartphones measured forward head posture 5 and 10 minutes after watching videos on their smartphones. Cervical range of motion was used to set a smartphone watching start posture of 20° and 40° of cervical flexion. Results: There was no significant difference in forward head posture, irrespective of cervical flexion start position, but the angle of forward head posture increased more at cervical flexion of 40° than at cervical flexion of 20°. There was no significant difference in what according to smartphone video viewing times, but the angle of forward head posture increased over time. Conclusion: An increase in forward head posture over time with smartphone usage poses a potential risk of neck and shoulder pain. Therefore, smartphone users should avoid prolonged screen time.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.179-181
• /
• 2012

본 연구는 NAND 플래시 기반의 임베디드 시스템에 warm-start 개념을 도입하여 재부팅 시간을 단축시키는 방법에 관한 연구이다. NAND 플래시 기반의 임베디드 시스템에서는 부팅 시 커널 이미지를 NAND 플래시에서 DRAM으로 로드하는 과정이 필요하다. 최근 SoC (System-On-Chip)는 "software reset" 기능을 지원하며 DRAM의 내용을 훼손하지 않고 시스템을 리셋하는 것이 가능하다. 우리는 이 기능을 이용하여 DRAM 상에 이미 로드되어 있는 커널 요소를 재부팅 시에도 다시 사용하도록 구현하고, 그에 따라 중복된 커널 요소의 로드를 제거했다. 이 기법을 우리는 KWS(Kernel-Warm-Start) 라는 이름으로 정의했다. KWS 에서는 부팅이 재부팅인 경우 필요한 커널 요소만을 로드한다. 결과적으로 재부팅 시 커널 요소의 로드 크기를 89.29% 감소시킬 수 있었고, 재부팅 시간을 첫 번째 부팅에서 75.47% 단축할 수 있었다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.22-30
• /
• 2003

Engine-out HC emissions were investigated during cold and hot start. The tests were conducted according to engine cooling temperatures which were controlled by simulated coolant temperatures of cold and hot start, on a 1.5L, 4-cylinder, 16 valve, multipoint-port-fuel-injection gasoline engine. Real time engine-out HC emissions were measured at a exhaust port and cylinder head using Fast Response Flame Ionization Detector(FRFID). Unburned hydrocarbons emitted at the cold coolant temperature were much higher than those of the hot coolant temperatures. And the main source of the high HC emission was confirmed as misfire at cold coolant temperature. In addition, the effect of intake valve timing on engine-out HC emissions was investigated. The results obtained indicate that optimized intake phasing provides the potential for start-up engine-out HC emissions reduction.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.2
• /
• pp.19-32
• /
• 2020

The purpose of this study was to investigate the influence factors of the university level centering on the entrepreneurial performance of the university students and full-time faculties in the situation of increasing interest in entrepreneurial university. In order to achieve the purpose of the study, a panel data was established from 2015 to 2018 on the basis of the university notification data. The panel data included universities with data on the number of university students and full-time faculty founders for at least two years. Through this, four year data from 154 universities were used for analysis. As an analysis method, frequency analysis and descriptive statistics were conducted to understand the characteristics of the university. Since then, panel negative binomial regression analysis has been conducted in consideration of the longitudinal features and distribution of the data. Also, based on the Hausman test results, the results were interpreted based on random effect model. The results of this study are as follows. First, as a result of the analysis of the entrepreneurial performance and the change trend of the domestic university from 2015 to 2018, the entrepreneurial performance of the university has been steadily increasing in the last four years, and the increase in the number of university student entrepreneurs was relatively higher than the full-time faculties. Second, economic and educational approaches need to be combined to promote university students' start-ups. The university factors that promote the start-up of university students were found to be scholarships, start-up grants, startup lectures, and startup clubs. Third, the openness and regional characteristics of the univeristy can promote the establishment of university students. Fourth, the establishment of a research environment and support for start-ups for full-time faculty members can enhance their start-up performance. The university factors that promote the start-up of full-time faculty were research funds and staffes who support start-up. The conclusions drawn from these findings are as follows. First, overall efforts are needed to develop into an entrepreneurial university. Second, in order to change into an entrepreneurial university, direct support for entrepreneurship is needed. Third, as an entrepreneurial university, it is necessary to find a way to bridge the gap by university according to region and size. Fourth, it is necessary to reinforce the support for linking the research results of universities to start-ups. Fifth, it is necessary to improve the atmosphere for full-time faculty members to be entrepreneur.