• 제목/요약/키워드: start time

검색결과 1,584건 처리시간 0.034초

개심술 시 냉혈성 심정지액 사용에 따른 허혈 전후 심근 미세구조의 변화 (Ultrastructrual Change of Myocardium in Open Cardiac Surgery with Cold Blood Cardioplegia)

  • 김병호;김대현;공준혁;조준용;손윤경;이종태
    • Journal of Chest Surgery
    • /
    • 제36권9호
    • /
    • pp.638-645
    • /
    • 2003
  • 본 연구에서는 사용된 혈성심정지용액에 의한 심근보호의 효과를 평가하고 심근보호를 평가하는 방법에 있어서 심근 미세구조관찰의 유용성과 다른 검사방법들과의 상관관계를 알아 보고자 하였다. 대상 및 방법 : 판막수술 및 관상동맥우회로술을 시행한 18명의 환자의 심전도, CK의 MB 동위효소, SGOT, LDH1과 LDH2의 비 등의 변화를 측정하고 반정량적인 방법을 통해 심근 미세구조의 변화를 관찰하였다. 인공심폐기 가동 직전과 인공심폐기 가동 직후 우심방 부속지에 조직검사를 시행하였고, 심근관련 혈청효소치들과 심전도는 술 후 3일 동안 검사하여 최고치를 구하였으며 심전도에서는 새로운 Q파나 ST분절의 상승을 관찰하였다. 결과: 대상환자는 남자 8명, 여자 10명이었으며 평균연령은 55.6$\pm$13세였다. 판막수술을 시행한 환자는 8명 관상동맥우회로술을 시행한 환자는 10명이었고, 평균 체외순환시간은 119$\pm$29분이었고 평균 대동맥차단시간은 75.4$\pm$24분이었다 체외순환 직전의 1.28$\pm$0.53이었던 평균 사립체 변화점수가 체외순환이후에는 2.35$\pm$0.79로 의미있게 증가했으나 술 후 심근경색을 시사하는 심근관련 혈청효소치의 증가나 심전도상의 새로운 Q파의 발견이나 ST분절의 상승은 없었다. 그리고 체외순환인 직전 및 직후 심근 사립체 변화점수, 또한 이들의 차는 체외순환시간 및 대동맥차단시간과 상관관계가 없었으며, 술 후 CK-MB, SGOT, LDH1/LDH2 등의 최고치와도 유의한 상관관계를 보이지 않았으나 체외순환시간과 LDH1/LDH2수치는 유의한 상관관계를 보였다 결론: 혈성심정지용액을 사용한 이번 연구에서 심근관련혈청수치나 심전도상에서 만족스러운 결과를 보였지만 심근의 미세구조에는 많은 변화가 있었으며 보다 많은 연구들이 이루어져야 할 것이다.

STRAIN AND TEMPERATURE CHANGES DURING THE POLYMERIZATION OF AUTOPOLYMERIZING ACRYLIC RESINS

  • Ahn Hyung-Jun;Kim Chang-Whe;Kim Yung-Soo
    • 대한치과보철학회지
    • /
    • 제39권6호
    • /
    • pp.709-734
    • /
    • 2001
  • The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

  • PDF

재발성 자연 기흉에 대한 정중액과 개흉술과 비디오 흉강경수술의 비교연구 (Clinical Study after Video-Assisted Thoracic Surgery and Mid-Axillary Thoracotomy for Recurrent Spontaneous Pneumothorax)

  • 이정상
    • Journal of Chest Surgery
    • /
    • 제32권1호
    • /
    • pp.43-48
    • /
    • 1999
  • 배경: 정중액와 개흉술 및 근래에 많이 시술되는 비디오흉강경수술은 기존 개흉술과 달리 덜 침습적인 수술방법으로 절개 창상이 적으며, 수술 후 동통, 무기폐, 창상감염, 출혈 등이 적고, 입원기간이 단축되며, 미용면에서 유리한 점이 많아 일부 흉부질환에서 선호되는 시술이다. 대상 및 방법: 보라매병원에서는 기존 개흉술중 덜 침습적인 수술요법으로서의 정중액와 개흉술 30례와 비데오흉강경 수술 30례를 연령 18세에서 25세사이의 재발생 자연기흉에 대한 임상례에서 비교연구 하였다. 1992년 1월부터 1993년 12월까지 83명의 기흉수술환자중 18∼25세 사이 30명에 대한 정중액와 개흉술 제 I군과 1994년 1월부터 1995년 8월까지 101례의 비데오 흉강경수술중 56명의 기흉수술에서 18세부터 25세사이 30명 제 II군을 비교검토하였다. 결과: 1) 수술전 흉관거치기간은 제 I군은 2일에서 15일(평균 4.69 2.72일), 제 II군은 2일에서 12일(평균 4.60 2.87일)로서 통계적으로 의미가 없었으며, 2) 수술시간은 피부절개부터 피부봉합까지 제 I군은 40분에서 150분(평균 84.79 21.70분), 제 II군은 58분에서 120분(평균 108.82 42.02분)으로 통계적으로 의미가 있었으며(P<0.0001), 3) 수술후 24시간 흉관배액은 제 I군에서 65 ml부터 400 ml(평균 220.76 106.73 ml), 제 II군에서 70 ml부터 320 ml(평균 260.63 233.18 ml)로서 통계적으로 의미가 없었으며, 4) 수술후 24시간 요구된 Tarasyn 진통제 용량이 제 I군은 0앰플에서 5앰플(평균 1.38 1.32앰플)이며, 제 II군은 0앰플에서 4앰플(평균 0.72 1.02 앰플) 로 통계적으로 의미가 있었으며(P<0.05), 5) 수술후 흉관 거치기간은 제 I군은 3일에서 17일(평균 5.45 3.09일), 제 II군은 2일에서 14일(평균 4.75 3.1일)로서 통계적 의미가 없었다. 6) 수술후 사용한 자동봉합기는 제 I군은 0개에서 3개(평균 1.31 0.06개), 제 II군은 0개에서 11개(평균 3.41 2.37개)로서 통계적 의미가 있었다(P<0.0001). 7) 수술후 합병증은 제 I군에서 12일이상 공기누출이 2례 있었고(6.6%), 제 II군에서는 없었다. 8) 수술후 기흉재발율은 제 I, 제 II군 각각 1례씩 있었다(3.3%). 결론: 이상의 비교검토결과 18세부터 25세 사이의 재발성기흉환자에 있어서 비디오흉강경 수술요법은 정중액와 개흉술에 비하여, 통계적으로 의미있게, 수술시간이 길고, 자동봉합기 사용량이 많고, 수술후 진통제 사용량이 적었으며, 나머지 상기비교지수에서는 통계적으로 차이가 없었다.

  • PDF

비가역 방사성추적자 파라메터 영상을 위한 다중선형분석법 (Multiple Linear Analysis for Generating Parametric Images of Irreversible Radiotracer)

  • 김수진;이재성;이원우;김유경;장성준;손규리;김효철;정진욱;이동수
    • Nuclear Medicine and Molecular Imaging
    • /
    • 제41권4호
    • /
    • pp.317-325
    • /
    • 2007
  • 동적 PET 데이터는 구획모델과 Nonlinear Least Squares(NLS)방법을 사용하여 분석함으로서 각종 생화학적 물질의 생체 대사율 등을 정량화 할 수 있다. 하지만 NLS방법은 변수의 초기 값이 적절하지 않을 경우 지역적인 최소점에 빠지거나 계산시간이 길어 동역학 변수들을 각 화소마다 구해야 하는 파라메터 영상(parametric image) 구성에는 효과적이지 않다. Patlak 도표분석법(PGA)은 비선형 방정식을 선형화하여 값을 추정함으로서 간단하면서 적은 계산량으로 인해 파라메터 영상을 구성하는데 많이 사용되고 있으나 잡음성분과 선형구간 선정에 따라 값이 영향을 받는 단점이 있다. 따라서 이 연구에서는 3구획 비가역 모델에 적합한 다중선형분석법(MLAIR)을 고안하였으며 3구획 비가역 모델의 대표적 예인 $[^{18}F]Fluoride$ PET을 이용하여 미니돼지에서의 뼈 섭취률을 계산하여 PGA방법과 비교 분석해 보았다. 대상 및 방법: 3마리의 미니돼지를 대상으로 100MBq의 $[^{18}F]Fluoride$를 대퇴부 정맥에 주사하면서 ECAT EXAET 47 PET 스캐너를 이용하여 60분간 PET 영상을 얻었다. 케타민과 자일라진을 이용하여 30분 간격으로 마취하였으며 실험동물을 진공 쿠션을 이용하여 반드시 누운 자세로 위치하도록 고정 시켰다. 입력함수인 혈장 내 농도곡선은 대퇴동맥으로부터 스캔 시작과 함께 혈액 채취를 통해 얻었다. ROI분석을 위해 대퇴골두, 척추 뼈, 근육에 ROI를 그려 조직 내 시간-방사능 곡선을 얻었다. $k_4$가 0인 3구획 비가역 모델로부터 MLAIR와 PGA방법을 사용하여 관심영역에서의 뼈 섭취률 $K_i$와 파라메터 영상을 구성하였다. PGA방법은 선형구간의 시작점인 $t^*$선택에 따른 영향을 보기 위해 분석구간을 변화시켜가며 분석하였다. 결과: ROI 분석결과 추정된 $K_i$값은 NLS방법에 비하여 MLAIR방법과 PGA방법 모두에서 과대 추정되었으나 두 분석방법 끼리는 비슷한결과를 보였다. Patlak 기울기는 $t^*$선택에 따라 값이 변하였으며 Patlak 상수는 Fluoride 섭취가 높은 대퇴골두나 척추뼈에서 30분이 지나서야 일정한 값으로 나타났고 섭취가 낮은 근육에서는 10분만에 일정해졌다. 파라메터 영상에서는 제안한 MLAIR방법이 PGA방법에 비해 영상의 질을 향상시킴을 알 수 있었다. 또한 PGA방법을 이용하여 구성한 파라메터 영상은 $t^*$값이 커질수록 급격히 영상의 질이 저하됨을 볼 수 있다. 특히 Fluoride 섭취가 높은 영역에서 Patlak 상수가 일정해지는 시간인 $t^*$값이 30분일 때 파라메터 영상은 MLAIR와 크게 차이가 났다. 결론 결론적으로 제안한 MLAIR방법은 선형구간을 정할 필요 없이 모든 데이터를 사용하는 이점이 있으며 선형적인 방법을 통해 $K_i$값을 얻을 수 있어 계산시간을 단축 시켜 줄 뿐 아니라 잡음성분에 강해 파라메터 영상의 질을 크게 향상 시켜 줌으로 비가역 3구획모델에서의 PGA방법을 대체할 새로운 파라메터 영상구성방법으로 적합할 것이다.

병원중심 가정간호관리대상 범위 확대를 위한 기초연구(II) - 자동차보험가입 입원환자를 대상으로 - (A Preliminary Study for Expending of Hospital-Based Home Health Care Coverage - Focused on Car Accident Inpatients Who has the Compensation Insurance -)

  • 박은숙;이숙자;박영주;유호신
    • 가정간호학회지
    • /
    • 제7권1호
    • /
    • pp.58-72
    • /
    • 2000
  • This study was an attempt to encourage the development of a rehabilitation delivery system and programs as a substitute service for hospitalization on the case of car accident patients, such as hospital based home health care nursing services. Various substitute services for hospitalization are required to curtail the length of stay for inpatients who were hospitalized with car accident compensation insurance. It focused on developing an estimation an early discharge day for car accident inpatients based on detailed statements of treatment for 111 inpatients who were hospitalized at the General Hospital in 1997. This study had four specific purposes as follows. First. to find out the utilization of medical services. Second, to estimate the time of early discharge and income increasing effect based on early discharge for those patients. Third, to identify the factors affecting total medical expenditure and the length of stay for those inpatients. Forth, to figure out the need of utilizing home health care nursing service for accident patients. In order to analyze the length of stay and medical expenditure for inpatients who were hospitalized due to car accidents, the authors conducted micro- and macro-analysis of medical and medical expenditure records. Micro-analysis was done by nominal group discussion of 4 expertise with the critical criteria, such as a decrease in the amount of treatment after surgery, treatments, tests, drugs and changes in the test consistency, drug methods, vital signs, start of ROM exercise, doctor's order, patient's outside visiting ability, and stable conditions. In addition to identifying variables affecting medical expenditure, and the length of stay and income effect due to early discharge day, the data was analyzed with a multiple regression analysis and linear regression analysis model by SPSS-PC for windows and Excell program. Results of this study were as follows. First. the mean length of stay was 50.3 days. whereas the mean length of stay due to early discharge was 34.3 days at the hospital. The estimation of time of early discharge depended on the length of stay. The longer the length of stay, the longer the length of time of early discharge : for instance a length of stay under 10 days was estimated as correlating to a mean length of stay of 6.6 days and early discharge of 6.5. The mean length of stay was 217.4 days and the time of early discharge was 110.1 respectively. The mean medical expenditure per day was found to be 169.085 Won and the mean medical expenditure per day showed negative linear trends according to the length of stay at the hospital. The estimation results of the income effect due to being discharged 16 days early was around 2,244,000 won per bed. However. this sum does not represent the real benefits resulting from early discharge, but rather the income increasing amount without considering medical prime cost in the general hospital. Therefore, further analysis is required on the cost containments and benefits as turn over rate per bed as the medical prime costs. The length of stay was most significant and was positive to the total medical expenditure, as expected. Surgery and patient's residential area was also an important variable in explaining medical expenditure. The level of complications was the most significant variable in explaining the length of stay. There was a high level for need a home health care nursing service which further supports early discharge for accident patients. In addition, when the patient was discharged. they needed follow up care for complications suffered during the car accident. $86.8\%$ of discharged patients responded that they needed home health services after early discharge. From these research findings, the following suggestions have been drawn. Strategies on a health care delivery system must be developed in order to focus on the consumer's needs and being planned for 21 century health policy in Korea. Community based intermediate facilities or home health care should be developed for rehabilitation services as a substitute for hospitalization in order to shorten the length of stay would be. A hospital based home health care nursing service. it would be available immediately to utilize by patients who want rehabilitation services as a substitute for hospitalization with the cooperation of car insurance companies.

  • PDF

평행봉 Belle 기술동작의 운동학적 분석 (A Kinematical Analysis of Belle Motion on Parallel Bars)

  • 공태웅
    • 한국운동역학회지
    • /
    • 제15권4호
    • /
    • pp.43-53
    • /
    • 2005
  • This study is to define how the difference of athletic change influence on the last regrasp after somersault in Belle movement of parallel bars. For his study, the following conclusion was produced by analysis of athletic change by means of three dimensional visual image in three athlete of nation. 1. As the picture of S1, there are total used time(2.01 sec), S3(2.17 sec) and S2(2.19 sec). In case of a short needed time, it is difficult for them to perform the remaining movement of the vertical elevating flight easily and comfortably, it is judged as performing the small movement with restrict swing. 2 In the change of body center sped by each event, it is calculated as $-89.1^{\circ}$ the narrowest in S1, $-81.96^{\circ}$ the widest and then $86.34^{\circ}$ in S3. In E3 event, average compound speed is 4.07m/s, S2 showed the fastest speed of 4.14m/s whereas S1 the narrowest angle of 3.95m/s. 3. A shoulder joint and coxa are the period of mention in E3. In E4 which was pointed out the longest vertical distance, S2 that is indicated the highest vertical height as the period of detach in parallel bars. showed -3.91m. This is regarded as a preparatory movement for dynamic performance after using effectively elastic movement of shoulder joint and coxa while easily going up with turning back movement. In the 5th phrase, long airborne time and vertical change position is showed as the start while regrasping securely air flight movement from high position. 4. In E5, a long flight time and a long vertical displacement were shown as the regrasp after somersault efficiently in high position with stability from the point of the highest peak of the center of the body. Especially, S2 is marked as a little bit long position, while S1 is reversely indicated as performing somersault and unstable motion in a low position. 5. In E3, at the point of the largest extension of the shoulder joint and hip joint the shoulder joint is largely marked in $182^{\circ}$ and the hip point $182^{\circ}$ in S2. The shoulder joint is marked at the smallest angle in $177^{\circ}$ and the hip point $176^{\circ}$ in S1. And S1 is being judged by its performance of the less self - confident motion with lessening a breath of swing. S2 makes the most use of flexion and extension of the shoulder joint and the hip joint effectively. It was performed greatly with swinging and dropping the rotary movement and the rotary inertia naturally. 6. In E6, as the point of regrasp of the upper arm in parallel bars it is recognized by the that of components of vertical and horizontal velocity stably. During this study, the insufficient thing and the study on the parallel bars at a real game later are more activated than now. If it is really used as the basic materials by means of Belle Picked Study of Super E level after Bell movement, you may perceive the technique movement previously and perform without difficulty. Especially, such technique as crucifix is quite advantageous for oriental people thanks to small body shape condition. In conclusion we will nicely prepare for our suitable environment to gradually lessen trials and errors by analyzing and studying kinematically this movement.

중국 하북성 마을제 연구 - 하북성조현범장이월이룡패회중룡신적여인(河北省趙縣范庄二月二龍牌會中龍神的與人) - (A Study of Local Festival for the China Hebeisheng)

  • 박광준
    • 헤리티지:역사와 과학
    • /
    • 제36권
    • /
    • pp.347-377
    • /
    • 2003
  • China is a country with large agricultural areas and subject to frequent calamities. Drought is the top of them. It has been a key problem for development of agriculture in the country. In the long struggle against drought, Chinese have accumulated many rational and irrational experiences. The Dragon Kings Belief, which is popular in North China and discussed in a thesis, is one of their irrational experiences. The belief was passed together with Buddhism from India to China in the Tang Dynasty. After it settled down, it was incorporated with the local five dragons belief and a set of beliefs in dragon kings came into existence. The emergence of the dragon kings belief ended the history that the title of rain got was not clear in China and Dragon kings finally got the status. Irrigation is the lifeblood of agriculture in China. In a Chinese mind, Dragon kings are the most important gods who take charge of rain and thus offer the lifeblood. In understanding the nature and characteristics of Chinese traditional culture, it is important for us to make clear the origin and evolution of the belief, find out its nature, function and operation. In the every year beginning of February of the Fanzhuang calendar in the people of Hebeisheng Zhaoxian, would all hold a festival to offer sacrifices to the $^{{\circ}TM}^{\prime}longpai$. Longpai was regarded as the core of the temple fair, thus the native sons came to call this festival; "longpaihui". In this region the'Fanzhuang longpaihui'developed into a well knownand grand temple fair. It was able to attract numerous pilgrims with its special magic power, occupying a place in $China^{{\circ}TM}$ 'eryueer'festival with festive dragon activities. The dragon is a common totem among Chinese nationals. The belief worship of the dragon dates from the start time of primitive societies. Dragon oneself the ancients worship's thunder lightning. In the worship of the great universe, at first afterwards this belief with the tribe's totem worships to combine to become the animal spirit. In ancient myths legends, along with folk religion and beliefs all hold a very important position. The longpaihui is a temple fair without a temple; this characteristic is a distinction between longpaihui and other temple fairs. As for longpaihui must of the early historical records are unclear. The originator of a huitou system has a kind of organized form of the special features rather, originator of a huitou not fix constant, everything follows voluntarily principle, can become member with the freedom, also can back at any time the meeting. There is a longpaihui for 'dangjiaren', is total representative director in the originator of a huitou will. 'banghui' scope particularly for extensive, come apparently every kind of buildup that help can return into the banghui, where is the person of this village or outside village of, the general cent in banghui work is clear and definite, for longpaihui would various businesses open smoothly the exhibition provides to guarantees powerfully. Fanzhuang longpaihui from the beginning of February to beginning six proceed six days totally. The longpai is used as the ancestry absolute being to exsits with the community absolute being at the same time in fanzhuang first took civil faith, in reality is a kind of method to support social machine in native folks realize together that local community that important function, it provided a space, a kind of a view to take with a relation, rising contact, communication, solidify the community contents small village, formation with fanzhuang. The fanzhuang is used as supplies for gathering town, by luck too is this local community trade exchanges center at the same time therefore can say the faith of the longpai, in addition to its people's custom, religious meaning, still have got the important and social function. Moreover matter worthy of mentioning, Longpai would in organize process, from prepare and plan the producing of meeting every kind of meeting a longpeng of the matter do, all letting person feeling is to adjust the popular support of, get the mass approbation with positive participate. Apart from the originator of a huitou excluding, those although not originator of a huitou, however enthusiasm participate the banghui of its business, also is too much for the number.

20세기 한국 문화재 인식의 이데올로기적 영향과 변화 (Ideological Impacts and Change in the Recognition of Korean Cultural Heritage during the 20th Century)

  • 오춘영
    • 헤리티지:역사와 과학
    • /
    • 제53권4호
    • /
    • pp.60-77
    • /
    • 2020
  • 문화재 인식의 출발점이 되는 문화재 '선택'에는 당시 지배 권력의 문화적 이데올로기가 반영된다는 가정을 세웠고, 이를 20세기 한국의 사례를 통해 증명하였다. 먼저 대한제국 후기(1901~1910)에는 조선시대부터 가져오던 과거 유적들에 대한 관점을 거의 유지하고 있었다. 국가가 중요하게 보호하려 한 대상은 왕릉과 왕실기록물들이었다. 이 시기에 한국 유적들에 대한 일본인들의 조사가 본격적으로 시작되었고, 이에 자극받은 계몽주의 지식인들에 의한 주체적 문화재 인식 시도가 있었으나 제도화되지 못하였다. 일제강점기(1910~1945)에는 일본인들 주도로 문화재 조사와 제도화가 진행되었고, 이는 현재 한국 문화재 관리체계의 출발점이 되었다. 당시 조선총독부가 주도한 고적 조사, 지정, 보호, 선양 활동은 일본 제국주의 지배를 합리화함과 동시에 식민주의 사관을 반영하는 것들이었다. 국내 민족주의자들이 계몽적 차원에서 고적애호 운동을 벌였으나, 이는 일본인들이 기획한 고적조사 성과에 기초하였다는 한계가 있었다. 해방 후(1945~2000)에는 민족주의 이데올로기에 기반하여 문화재 복구와 복원 활동들이 있었고, 여기에도 정권의 정통성을 공고히 하려는 의도가 내포되었다. 그리고 1997년의 '문화유산 헌장' 제정은 문화재가 민족주의 이데올로기의 수단이 되는 것을 넘어 그 자체로 이데올로기가 되는 일이었다. 지난 20세기 동안 한국에서는 정치권력의 선택에 따라 문화재의 내용이 변하였다. 이 선택에는 당시 권력이 문화재에 대해 가지는 문화적인 이데올로기가 반영되었다. 이런 문화재 선택의 배경에는 개념어와 사회의 상호 보완적 관계, 즉 집합기억의 이데올로기적 특성이 작용하고 있었다. 지배집단은 그들의 이데올로기를 피지배집단에 각인시키려 하는데, 그 수단으로 정권의 정통성을 인식시킬 수 있는 전통문화에 관련된 집합기억, 즉 문화재 선정과 활용에 관여함으로써 이를 실현하려고 했다고 볼 수 있다.

이론 및 실습, 대면 및 비대면 교육 방식이 기업가정신과 창업의지에 미치는 효과 차이 연구: 코로나 펜데믹 상황의 대학생들을 대상으로 (Studying the Differences in the Effects of Theoretical and Practical, Face-to-face and Virtual Teaching Methods on Entrepreneurship and Willingness to Start a Business: University Students During the Coronavirus Pandemic)

  • 박미정;이철규;황보윤
    • 벤처창업연구
    • /
    • 제19권2호
    • /
    • pp.81-96
    • /
    • 2024
  • 본 연구는 코로나 펜데믹 상황의 대학생들을 대상으로 이론교육과 실습교육, 대면교육과 비대면교육으로 구분하여 교육 방식에 따라 기업가정신과 창업의지에 미치는 효과 차이를 분석함으로써 기존연구의 대상과 달리 전면 비대면 강의를 경험한 대학생들의 기업가정신 교육효과가 높은 강좌 운영형태를 도출하고, 기업가정신교육의 효과를 높이는 방안을 제시하고자 하였다. 본 연구는 충청도 소재 종합대학의 재학생 552명을 대상으로 기업가정신 교육을 시행하고 표본을 이론교육과 실습교육, 대면교육과 비대면 교육으로 구분하여 분석하였다. 또한 이원 반복측정 ANOVA를 실시하여 교육 전·후 시점에 따라 기업가정신 교육 강좌 운영형태의 차이가 있는지 확인하고자 하였다. 연구결과, 첫째, 이론 및 실습교육의 교육 전·후 기업가정신 교육의 효과 차이는 유의적으로 나타났으며, 교육 후 이론교육보다 실습교육의 기업가정신이 높은 것으로 나타났다. 창업의지의 교육 전후 차이 검증에서는 실습교육에서만 효과 차이가 유의적으로 나타났다. 둘째, 교육 전·후 시점 차이에 따라 이론-실습의 강좌 운영형태의 반복측정 ANOVA 분석 결과는 교육 시점에 따라 이론-실습 강좌의 기업가정신 효과 차이가 있는 것으로 나타났다. 셋째, 대면 및 비대면교육에 따른 기업가정신 교육의 효과 차이는 유의적으로 나타났고, 창업의지에서 비대면 교육의 효과만 교육 전·후 차이가 유의적인 것으로 나타났다. 넷째, 교육 전·후 시점 차이에 따라 대면-비대면 강좌운영형태의 반복측정 ANOVA 분석 결과는 교육 시점에 따라 대면-비대면의 기업가정신의 효과 차이가 있는 것으로 나타났다. 창업의지효과는 비대면교육에서만 교육전·후 차이가 유의적인 것으로 나타났다. 본 연구의 시사점은 대학생의 기업가정신과 창업의지의 효과를 높이기 위해서는 교육대상이 적극적으로 창업과 관계된 활동에 참여하는 실습수업의 양적확대가 필요하다. 또한 창업의지 효과를 높이기 위해서는 메타버스 공간을 활용하여 수강생 각자의 역할 비중이 높은 비대면 교육 방식이 창업의지 효과성을 높이는 데 기여할 수 있다는 것이다.

  • PDF

Open Source를 이용한 MicroPACS의 구성과 활용 (Application of MicroPACS Using the Open Source)

  • 유연욱;김용근;김영석;원우재;김태성;김석기
    • 핵의학기술
    • /
    • 제13권1호
    • /
    • pp.51-56
    • /
    • 2009
  • 목적 : Small-scalled PACS, Pc-based PACS로 표현되는 MicroPACS 시스템 구축에 대한 관심도가 급격하게 증가하고 있는 추세이다. MicroPACS 시스템은 PACS를 작은 규모에서 사용할 수 있도록 구성해놓은 것이고, 이 시스템을 구성하기 위해서는 DICOM viewer나 연결프로그램 등이 필요하다. 이것은 공개소스프로그램(Open Source Program)을 통해서 어느 누구나 쉽게 무료로 다운로드를 받을 수 있게 되어있다. 본 논문은 Open source program으로 MicroPACS를 직접 구성해보았고, 저장매체로서의 활용가치를 측정하기위하여 성능, 안정성 측면에서 기존의 광 저장매체(CD, DVDRAM)와 비교 분석하였다. 실험재료 및 방법 : 1. 소형 PACS를 구축하기 위해서 먼저 다음 기준에 맞는 DICOM Server Software를 검색한다. (1) 윈도우체제에서 사용가능할 것. (2) Free ware일 것. (3) PET/CT scanner와 호환되어야 할 것. (4) 사용하기 쉬워야 할 것. (5) 저장의 한계가 없어야 할 것. 2. (1) MicroPACS의 성능을 평가하기 위해 환자 1명의 Data ($^{18}F$-FDG Torso PET/CT)를 현재 Back-up장치로 쓰이는 광 저장매체(CD, DVD-RAM)와 MicroPACS에 저장하는데 소요되는 시간(Back up time)과 workstation으로 복구되기까지의 시간(Retrieval time)을 비교해 보았다. (2) PET/CT 검사를 시행했던 환자 1명의 병록번호와 검사 시행날짜를 핵의학과 직원 7명을 대상으로 알려주고 Data를 찾는데 소요되는 시간을 MicroPACS와 광 저장매체(CD, DVD-RAM)에서 각각 측정하여 비교하였다. 3. 기존의 백업장치로 쓰였던 CD들 중에서 2004년부터 2006년까지 500장을 무작위로 뽑아서 loading을 하였고 그중에서 얼마만큼의 에러가 발생하였는지를 측정하여 MicroPACS의 안정성을 비교평가하였다. 결과 : 1. Server와 DICOM viewer 기능을 갖춘 11개의 open source software 중에서 Conquest DICOM Server를 선택하였다. 2. (1) Backup과 Retrieval 시간 비교(단위 : 분)는 다음과 같다; DVD-RAM(5.13,2.26)/Conquest DICOM Server (1.49,1.19) by GE DSTE (p<0.001), CD (6.12,3.61)/Conquest (0.82,2.23) by GE DLS (p<0.001), CD (5.88,3.25)/Conquest (1.05,2.06) by SIEMENS. (2) CD ($156{\pm}46$초), DVD-RAM ($115{\pm}21$초) and Conquest DICOM Server ($13{\pm}6$초). 3. 1년간 MicroPACS에서의 데이터손실은 없었으며(0%), 500장의 CD 중에서 14개(2.8%)가 Loading하는데 실패하였다. 결론 : 현재 많은 병원에서 도입되고 있는 Full PACS를 open source software를 통하여 소규모의 PACS로 재현해 보았고, 그 결과 가능하다는 결론이 나왔다. 데이터 저장의 유용성을 평가한 결과에서 MicroPACS를 이용하는 것이 기존의 광저장매체를 사용하는 것보다 효율적이고 작업속도가 향상 된다는 것을 확인할 수 있다.

  • PDF