• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3353-3358
• /
• 2007

The present paper is devoted to investigate dynamic effect and steady-state performance of methane autothermal reformer theoretically and numerically. In order to simplify the complicated phenomena in the system, axisymmetric heterogeneous reactor model is developed. As autothermal reaction takes places on catalyst surface between bulk gas and catalyst, volume averaging method is incorporated using porous medium approach. To understand the start-up process which occurs in the reactor is highly important. Therefore, in this paper we get various goverining equations to find out transient and steady solutions and time scale for start-up introducing dimensionless variables. Start-up is a significant issue in reforming reaction for automobile system and fueling of SOFC-based auxiliary power units. This paper deals with characteristics of heat and mass transfer and predicted light-off time in the reformer as oxygen to carbon ratio ($O_2$/C) and amount of feeding gas.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.344-354
• /
• 2014

Transmission control protocol friendly rate control (TFRC) is designed to mainly provide optimal service for unicast applications, such as multimedia streaming in the best-effort Internet environment. However, high bandwidth networks with large delays present an environment where TFRC may have a problem in utilizing the full bandwidth. TFRC inherits the slow-start mechanism of TCP Reno, but this is a time-consuming process that may require many round-trip-times (RTTs), until an appropriate sending rate is reached. Another disadvantage inherited from TCP Reno is the RTT-unfairness problem, which severely affects the performance of long-RTT flows. In this paper, we suggest enhanced TFRC for high quality video streaming over high bandwidth delay product networks. First, we propose a fast startup scheme that increases the data rate more aggressively than the slow-start, while mitigating the overshooting problem. Second, we propose a bandwidth estimation method to achieve more equitable bandwidth allocations among streaming flows that compete for the same narrow link with different RTTs. Finally, we improve the responsiveness of TFRC in the presence of severe congestion. Simulation results have shown that our proposal can achieve a fast startup and provide fairness with competing flows compared to the original TFRC.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.3
• /
• pp.209-216
• /
• 2014

The purpose of this study was to explore the effect of 8 weeks after school classes of track sports on students' start motion through kinematic variables. 30 students in D National university of education participated for this study. These students divided into two groups, 17 students for experimental group and 13 students for control group. The two groups participated in general athletic class as common class, and the experimental group participated in after school class additionally. The general class taught track and jump skill for 3 hours a week, and the after school class taught only athletic running skill for 30 minutes a week. Pre and post test assessed to assess students' kinematic changes. Findings indicated that velocity and step rate were increased, and contact time, step length, displacement of center of mass were decreased in the experimental group. In the control group, early velocity, knee/hip angle velocity were increased, and contact time, step length, displacement of center of mass were decreased. In conclusion, the students who only participated in general class, could not maintain athletic skills obtained from the class. However, students who participated in both general and after school class accomplish athletic start skill. This is because Continuous learning effect helped students keep the skill and did not lose the skill. Thus, in order for students to learn specific sport skills, joining after school class with general class together is recommended.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.2
• /
• pp.133-140
• /
• 2009

A fast-response $CO_2$ analyzer has been developed for measuring the $CO_2$ concentration during transient condition of a SI engine. The analyzer consists of the non-dispersive infrared absorption method, electrical chopping system and water cooling system. The analyzer has good repeatability, linearity and permissible drift characteristic. Besides, it showed 18ms of a response to measure the $CO_2$ concentration. The fast-response $CO_2$ analyzer was applied to a single cylinder SI engine and the $CO_2$ emission was examined during engine start. Simultaneously, the standard exhaust gas analyzer, which has slow response time, was used for confirming the accuracy of the exhaust gas analysis using the fast-response $CO_2$ analyzer. The developed analyzer showed much faster responsive characteristic than that of a standard analyzer and made cycle by cycle exhaust gas analysis possible. The transient engine operating characteristics will be estimated from the $CO_2$ concentration of engine-out emissions and engine operating variables.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.3
• /
• pp.315-321
• /
• 2016

Objective: The aim of this study was to analyze effects of the toe-spring angle of bobsleigh shoes on start speed lap time to develop Korean-specific bobsled shoes suitable for winter environments and for domestic players on the basis of sports science and optimized biomechanical performance. Method: Seven Korean bobsleigh athletes participated in this study, with three pairs of sprint spikes from three companies (Type A, Type B, Type C). To analyze sprint lap time and forefoot bending angle for each shoe, participants were instructed to drag a sled 15 meters from the start line at a maximum sprint. forefoot bending angle was collected by a high speed camera, and lap time speed was measured. Results: Lap time for type B shoes was $3.52{\pm}0.17sec$, type A was $3.55{\pm}0.19sec$, and type C was $3.56{\pm}0.18sec$. Forefoot bending angles were: angle 1, $6.88{\pm}5.55^{\circ}$; angle 2, $9.23{\pm}6.38^{\circ}$; angle 3, $15.56{\pm}5.39^{\circ}$; angle 4, $9.54{\pm}3.85^{\circ}$; angle 5, $9.22{\pm}5.08^{\circ}$; angle 6, $7.66{\pm}6.44^{\circ}$; and angle 7, $4.30{\pm}6.24^{\circ}$ (p<.001). Forefoot bending in angle 3 was as follows: type A, $16.47{\pm}6.01^{\circ}$; type B, $14.30{\pm}4.96^{\circ}$; and type C, $15.90{\pm}5.17^{\circ}$. Conclusion: Hard outsoles and midsoles are better than soft type for reduced start lap time when developing a prototype Korean bobsled shoe.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.19-27
• /
• 2007

We have implemented a WWW homepage which finds an optimal route for users. There already exist many web sites which provide the optimal route when a start and a destination cities are given. However, none of them can find the optimal route when a number of cities to be visited. The problem of finding the optimal route starting at a given start city and visiting through all the given intermediate cities and finally returning to the start city is called Travelling Sales Person(TSP) problem. TSP is a well known exponential time complexity problem. We have implemented an artificial intelligent search algorithm for TSP on our homepage. The main feature of our algorithm is that the destination may not be the same as the start city whereas all of the existing heuristic algorithms for TSP assume that the start and the destination cities are the same. The web page asks a user to select all the cities he or she wants to visit(including start and destination city), then it finds a sequence of the cities such that the user would travel minimum distance if he or she visits the cities in the order of the sequence. This paper presents algorithms used in the homepage.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.93-105
• /
• 2008

This study was for the analysis of Kinematic variables, using 3 types of starting block position setting(25cm, 40cm, 35cm). The subjects of the study were 8 short-distance male runners. In the study, the most desirable block setting type for the runner who were average 180cm tall to get the good record was 45cm (distance between the starting line and the front block) and 40cm (distance between the blocks). In conclusion, the most favorable start in 100m race was to get the strongest propelling power at the start line. The most important technical point was quick responding ability to the start signal and reaching the maximum speed at the shortest time through the strong kick using the front leaning body angle and gravity. Type B start method has shown the most effective results for the improvement of the records in the 100m race.

• Journal of Information Processing Systems
• /
• v.17 no.5
• /
• pp.879-891
• /
• 2021

With improvements in living conditions, an increasing number of people are choosing to spend their time traveling. Comfortable tour routes are affected by the season, time, and other local factors. In this paper, the influencing factors and principles of scenic spots are analyzed, a model used to find the available routes is built, and a multi-route choice model based on a game theory utilizing a path recommendation weight is developed. A Monte Carlo analysis of a tourist route subjected to fixed access point conditions is applied to account for uncertainties such as the season, start time, end time, stay time, number of scenic spots, destination, and start point. We use the Dijkstra method to obtain multiple path plans and calculate the path evaluation score using the Monte Carlo method. Finally, according to the user preference in the input path, game theory generates path ordering for user choice. The proposed approach achieves a state-of-the-art performance at the pseudo-imperial palace. Compared with other methods, the proposed method can avoid congestion and reduce the time cost.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.357-360
• /
• 2005

Hyundai Motor Company developed the second generation of fuel cell hybrid electric vehicle based on Tucson SUV in 2004. This vehicle has cold start capability below -10C and its driving performances including maximum speed and accelerating time are almost similar to conventional Tucson SUV's performances without any sacrifice in terms of cabin space. Especially. the cold start capability was realized by utilizing only internal power sources such as fuel cell power and high voltage lithium ion polymer battery. In this paper, we will briefly introduce specifications of Tucson FCEV and its driving performances based on field test and simulations.

• International Journal of Automotive Technology
• /
• v.1 no.2
• /
• pp.89-94
• /
• 2000

As a promising catalyst reducing cold start emissions of automobiles, a photocatalyst systems has been studied. Since the photocatalyst is only activated by UV wavelength light, it needs no heat energy like a conventional TWC, therefore no light-off time. However, as a cold temperature catalyst to treat cold start emissions of a vehicle, previous studies on characteristic of photocatalyst have room for improvement in terms of performance and durability investigated from the viewpoints of performance and durability improvement. Eleven different coating samples were prepared with the combination of six kinds of additives and two kinds of photocatalyst materials. Then these samples were aged with a hydrothermal aging process. The performance of these samples was measured on a model gas apparatus with simulated exhaust gases. The durability was also analyzed with X-ray diffraction meter.