• Korean Journal of Food Science and Technology
• /
• v.33 no.3
• /
• pp.313-318
• /
• 2001

Physicochemical properties of starch vermicelli (Dangmyun) made with different starches in laboratory were determined to develop a modified corn starch comparable to sweet potato starch which is highly expensive than corn starch but commonly used for starch vermicelli in Korea. Initial temperatures (Ti) of gelatinization of starch vermicelli made in laboratory measured by differential scanning calorimeter, which were above $60^{\circ}C$, were higher than those of starch vermicelli in the market. Their X-ray diffraction peaks were relatively sharp compared with those of starch vermicelli in the market, which showed that starches were not completely gelatinized during the process of starch vermicelli preparation in laboratory. Initial temperature (Ti) of corn starch vermicelli was decreased by $3^{\circ}C$ by hydroxypropylation but increased by $2.5^{\circ}C$ by oxidation. Hardness and compression slope of sweet potato starch vermicelli and mungbean starch vermicelli, which were $11,726{\sim}12,555\;g/cm^2$ and $29,914{\sim}30,604\;g/cm^2$, respectively, were the highest in the samples and those of waxy corn starch were lowest. Hardness and compression slope of starch vermicelli made with corn starch slightly oxidized in the concentration of 0.5% NaOCl at pH 9.0, $40^{\circ}C$ for 30 min. increased and found to be comparable to those of sweet potato starch vermicelli.

• Korean Journal of Food Science and Technology
• /
• v.37 no.1
• /
• pp.44-49
• /
• 2005

Physicochemical properties of hydroxypropylated rice starches were investigated. Swelling power of hydroxypropylated rice starch increased at relatively lower temperature than native rice starch. Solubility of hydroxypropylated rice starch was lower (1.9-13.4%) than that of native rice starch (2.2-13.8%), and increased with increasing amount of propylene oxide. Pasting temperature ($66.2-70.8^{\circ}C$) and peak viscosity (2,843-3,395cp) of hydroxypropylated rice starch were lower than those of native starch ($71.6^{\circ}C,\;3,976\;cp$) and decreased with increasing amount of propylene oxide, regardless of reaction time. DSC thermal transitions of hydroxypropylated rice starches shifted toward lower temperature. Amylopectin-melting enthalpy of hydroxypropylated rice starch decreased (11.8-9.8J/g) with increasing amount of propylene oxide and was lower than that of native starch (11.9 J/g). These results indicate hydroxypropylation lowered swelling power and gelatinization temperatures of rice starch, because internal bonds of rice starch molecules were sterically weaken by substituted hydroxypropyl groups.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.60-65
• /
• 2001

Physicochemical properties of 4 kinds of domestic and 7 kinds of foreign starch vermicelli (1 from Chinese, 6 from Japan) were determined. Peak temperature of starch vermicelli measured by DSC were $42{\sim}48^{\circ}C$ which were much lower than gelatinization temperatures of their raw material starches. X-ray diffraction peaks of starch vermicelli were not sharp compared with those of raw material starches which indicated that starches were gelatinized by heating and retrograded by cooling and freezing during production of starch vermicelli. Hardness and compression slope of sweet potato starch vermicelli measured by rheometer were respectively $9,500{\sim}11,000\;g/cm^2$ and $18,000{\sim}26,000\;g/cm^2$ which were twice higher than those of corn starch vermicelli. Cooking loss of corn starch vermicelli, which was 19.8%, was higher than that of sweet potato starch vermicelli, $4.2{\sim}6.6%$ and mung bean starch vermicelli, 7.7%. In changes of thickness of starch vermicelli during cooking i.e swelling ratio, sweet potato starch vermicelli had $58{\sim}69%$ of swelling ratio, which was higher than that of corn starch vermicelli, 50%. Corn starch vermicelli, which was relatively less elastic and easily broken, was shown to be inferior to that of sweet potato starch vermicelli in overall quality.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.516-521
• /
• 1997

Effect of amylose content on the physical properties of resistant starches (RS) from autoclaved maize starches (with starch:water=1:3.5, at $121^{\circ}C$) which were repeated up to 4 times heating-cooling cycles, were investigated by water uptake, scanning electron microscope (SEM) and differential scanning calorimetry (DSC). Amylose content of waxy maize starch (Amioca), common maize starch (PFP), high amylose starch(Amaizo, Amylomaize VII) were 0%, 29%, 50%, and 72%, respectively. Yield of RS increased as amylose content increased. Water uptake of all kinds of native starch was higher than that of RS, but lower than that of autoclaved starch. By SEM, RS showed some small particles on surface but the size of particles was different with amylose content. Single endothermic transition peak exhibited at $40{\sim}70^{\circ}C$ in autoclaved Amioca and PFP (crystalline melting of amylopectin) and at $132{\sim}169^{\circ}C$ in autoclaved Amaizo and Amylomaize VII(crystalline melting of amylose) by DSC. RS from all kinds of autoclaved starches except Amioca showed single endothermic peak over $155^{\circ}C$ but the enthalpy was not related to amylose content.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1291-1297
• /
• 2000

Particle size distribution, pasting properties by Rapid Visco Analyser, and textural properties of acorn, mungbean and buckwheat starches, which are the basic raw materials for mook, are compared. The major particle size of mungbean starch was $10{\sim}30$ micron, whereas acorn and buckwheat starches were $5{\sim}20$ micron. At the same starch concentration, mungbean starch had the highest peak viscosity, breakdown and setback. Acorn starch showed the lowest peak viscosity and breakdown. The peak viscosity of buckwheat starch was close to that of mungbean, however the trough and final viscosity were comparable to those of acorn starch. At the same peak viscosity, mungbean starch showed the lowest trough and final viscosity and the highest breakdown and setback. Acorn starch was differentiated from buckwheat starch in that the former had the higher value of setback. The textural properties of mungbean starch gel were significantly different from others. The texture of gels from acorn and buckwheat starches revealed that only the hardness and gumminess were different each other. The hardness of starch gels were negatively correlated with trough and final viscosity, and positively correlated with setback.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.382-387
• /
• 2011

Physicohemical properties of dual-modified rice starches, cross-linked (with $POCl_{3}$) and hydroxypropylated (with propylene oxide) rice starches, were studied. Rice starch was cross-linked using $POCl_{3}$ (0.005%, 0.02% (v/w)) at 45$^{\circ}C$ for 2 hr and then hydroxypropylated using propylene oxide (2%, 6%, 12% (v/w)) at 45$^{\circ}C$ for 24 hr, respectively. Swelling power, solubility, thermal properties (DSC) and pasting properties (RVA) of cross-linked and hydroxypropylated (CLHP) rice starches were determined. Swelling power of CLHP rice starch increased at relatively lower temperature than native rice starch. Solubility of CLHP rice starch was lower than that of native rice starch. Peak viscosity of CLHP rice starch was lower than that of native starch while holding strength and final viscosity were increased with modification. Breakdown value was lower and setback value was higher than native rice starch. DSC thermal transitions of CLHP rice starch shifted toward lower temperature. Amylopectin-melting enthalpy of CLHP rice starch decreased, whereas it was not affected by the amount of $POCl_{3}$.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2007.11a
• /
• pp.204-204
• /
• 2007

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06a
• /
• pp.45-46
• /
• 1993

• Food Science and Industry
• /
• v.47 no.3
• /
• pp.33-38
• /
• 2014

• Preventive Nutrition and Food Science
• /
• v.1 no.2
• /
• pp.190-195
• /
• 1996

Texture-modifying and freeze-thaw stabilizing effects of different wheat gluten and modified starches on surimi based-product were evaluated. The different incorporation manners of wheat gluten and modified wheat starch in surimi gel were also examined to evaluate their effects of textural properties on surimi gel. The addition of wheat gluten reduced the gel strength of surimi, but after freeze-thaw cycle it significantly improved freeze-thaw stability by reducing freexe-thaw expressible moisture and also by preventing rubbery texture development, Gluten-1 incorporated surimi gel showed higher functionality in forming cohesive gel determined by compressive and penetration force as wall as expressible moisture after freeze-thaw cycle. Surimi gel containing modified wheat starch showed better freeze-thaw stability that of modified potato starch. When a preblended mixture of wheat gluten and starch are incorporated into surimi gel, it made gel texture significantly softer as so in high sensory score. The compertition for moisture between gluten and starch is a main reason to show different way of textural modification.