• 한국생활과학회지
• /
• 제21권5호
• /
• pp.975-988
• /
• 2012

Although the pattern development for tight-fitting clothing has been carried out using 3D data on humans, the pattern development using 3D scan data obtained for various postures still remains an interesting subject. In this study, we have developed the 2D pattern using the 3D human body reflecting standing and cycling postures. The 3D scan data of a subject was obtained using Cyberware. 2C-AN program(Triangle simplification and the Runge-Kutta method) was used in the system to reduce the 3D scan data points and to make segmented triangular patches in a plane from 3D data. As results, surface distance and area of each body part of standing and cycling postures were also provided for the future application of the functional clothing construction. The area of center piece on the front (c.front) decreased by $106.45cm^2$(-13.08%) and that of lateral piece(s.back) on the back increased by $144.96cm^2$(18.69%) in the patterns of cycling posture. The girth of neck and waist for the cycling posture increased by 0.88cm (3.92%) and 1.56cm(4.40%) respectively, and the that of thigh decreased by 1.01cm(-2.24%). The differences between the area in the 2D pattern obtained from the 3D scan data and that in the 3D scan surface data for standing and cycling postures were very small($-10.34cm^2$(-0.32%) and $-44.33cm^2$(-1.32%)).

• PNF and Movement
• /
• 제17권1호
• /
• pp.41-46
• /
• 2019

Purpose: Continuous use of a smartphone increases the angle of forward bending of the user's cervical vertebrae, causing pain in the shoulders and back, including the thorax, lumbar region, and vertebrae. Although there are many studies on changes in the cervical spine due to smartphone usage, the changes in the shoulders, thoracolumbar spine, and pelvic have rarely been compared. The purpose of this study is to investigate the change in the spinal segments, shoulders, and pelvic when using a smartphone with both hands while in the standing position. Methods: This study was conducted on 35 adults in their twenties. The selection criteria for the subjects were limited to those in a similar age group, thus excluding posture differences according to age, and to those who did not have specific diseases or pain in the spinal and musculoskeletal system for 12 months prior to the study. In this study, we used a 3D spinal diagnostic imaging system (Back Mapper, Frickenhausen) to compare the changing conditions in each vertebral segment before and during smartphone usage with both hands while in the standing position. Posture differences according to smartphone usage were compared using the paired t-test for the motion of each spinal segment. Results: This study showed that the thoracic and lumbar angle increased posteriorly during smartphone usage (p<0.05). In addition, the anterior rotation angle of the shoulder bone significantly increased, but no significant difference occurred in the pelvic region. Conclusion: Based on the results of this study, smartphone usage with both hands while in the standing position showed that the spine, as a whole, forms a kyphotic curve. Therefore, we propose to present a postural guideline for correct smartphone usage, considering the change in each vertebral segment.

• 한국전문물리치료학회지
• /
• 제4권3호
• /
• pp.17-33
• /
• 1997

The objective of this study was to identify pulmonary functional variations in relation to postural changes, lapse after changing position, and the use of abdominal band in the cervical cord injured. The subjects of this study were 19 quadriplegic patients who had been admitted to the department of the Rehabilitation Hospital, College of Medicine, Yousei University, from April, 1997 through May 3, 1997. A spiroanalyzer was used to measure pulmonary function in supine, standing, time after changing position, and recording to the position, application method, and tightness of the abdominal band. The data were analyzed by the repeated measure one-way ANOVA, and Wilcoxon signed rank test. The findings were as follows: 1. All phase of the patients' pulmonary function improved significantly in supine posture in contrast to standing (vital capacity by $0.46{\ell}$ and expiratory reserve volume by $0.09{\ell}$). 2. The longer the time lapsed from supine posture to standing, the patient's expiratory reserve volume, maximum ventilation volume, vital capacity, and forced expiratory volume increased. 3. When the patient lay in supine position, the maximum ventilation volume, vital capacity, and the forced vital capacity increased then the center line of the abdominal band was placed along iliac crest; on the other hand, when the patient was standing, placing the bottom line of the abdominal band along iliac crest increased the maximum ventilation volume, vital capacity, and forced expiratory volume. 4. In placing the abdominal band in the patients, leaving space between the top and bottom lines of the band helped increased in maximum ventilation volume, vital capacity, and forced vital capacity for patient in supine as well as in standing. 5. When placing the abdominal band to patients in supine posture, reducing the length of the band by 2.5% along the patient's waist line increased the patients' vital capacity, while reducing the length by 10% to patients in standing increased the maximum ventilation volume. The abdominal band should be placed in such a way that the bottom part of the band should be more tightly fastened while leaving enough room for a hand to be placed in between the body and the band for the top part of the hand. It should also be noted that in a supine position, the bottom line of the band should be placed along the iliac crest, while in standing, the center line should be placed along the iliac crest. The length of the band should also be reduced by 2.5% of the waist line in supine position, and in standing, the length should be reduced by 10%. It should also be noted that the pulmonary function of the patients should be measured at least 10 minutes after one position change.

• The Journal of Korean Physical Therapy
• /
• 제25권5호
• /
• pp.232-238
• /
• 2013

Purpose: The aim of this study was to evaluate the effect of lumbar stabilization exercise on an unstable surface on trunk posture and static standing balance ability in patients with scoliosis. Methods: Subjects included 18 patients who showed symptom of scoliosis. Patients were divided into two experimental groups, one using an unstable surface and one using a fixed surface, and the patients were required to perform a lumbar stabilization exercise a total of 12 times for 60 minutes per session, three times per week for a period of four weeks, with a six-months follow-up period. Results: A significant reduction was observed in the group that performed the lumbar stabilization exercise on an unstable surface (p<0.05). A significant decrease in both the condition of closed eyes or open eyes in the left and right directions was observed in the group that performed the lumbar stabilization exercise on an unstable surface (p<0.05). After six months, results of comparison of the length of both sides of the trunk showed a significantl decrease in the group performing lumbar stabilization exercises on an unstable surface. Conclusion: Lumbar stabilization exercise on an unstable surface improved the trunk posture of patients with scoliosis symmetrically, and static balance ability in a standing posture showed improvement. In the future, lumbar stabilization exercise on an unstable surface may be used as an exercise for posture correction and balance increase for patients with scoliosis.

• 한국전문물리치료학회지
• /
• 제18권2호
• /
• pp.60-66
• /
• 2011

Foot posture is important in the development of the musculoskeletal structure in the lower limbs because it can change the mechanical alignment. Although foot orthotics are widely used for the correction of malalignments in the lower extremities, the biomechanical effects of wedges have not yet been cleared. The aim of this study was to investigate whether medial wedges affect the electromyographic (EMG) activity of the knee and hip joints in healthy adults that are performing one leg standing. Seventeen healthy volunteers performed the one leg standing under two foot conditions: A level surface, and a $15^{\circ}$ medial wedge. The subjects' EMG data for the gluteus maximus (Gmax), gluteus medius (Gmed), tensor fasciae latae (TFL), biceps femoris (BF), vastus lateralis (VL), and vastus medialis oblique (VMO) were recorded, along with the surface EMG, and all were analyzed. The EMG activity of the Gmed and TFL had significantly decreased under the medial wedge condition during one leg standing. Further study is needed in order to investigate whether medial wedges influence the EMG activity and kinematic data of the knee and hip joints as well as the ankle joints in adults with flexible flatfoot, while they are performing one leg standing.

• International Journal of Control, Automation, and Systems
• /
• 제4권3호
• /
• pp.325-332
• /
• 2006

The dynamic responses of human standing postural control were investigated when subjects were exposed to long-term horizontal vibration. It was hypothesized that the motion of standing posture complexity mainly occurs in the mid-sagittal plane. The motor-driven support platform was designed as a source of vibration. The AC Servo-controlled motors produced anterior/posterior (AP) motion. The platform acceleration and the trunk angular velocity were used as the input and the output of the system, respectively. A method was proposed to identify the complexity of the standing posture dynamics. That is, during AP platform motion, the subject's knee, hip and neck were tightly constrained by fixing assembly, so the lower extremity, trunk and head of the subject's body were individually immovable. Through this method, it was assumed that the ankle joint rotation mainly contributed to maintaining their body balance. Four subjects took part in this study. During the experiment, the random vibration was generated at a magnitude of $0.44m/s^2$, and the duration of each trial was 40 seconds. Measured data were estimated by the coherence function and the frequency response function for analyzing the dynamic behavior of standing control over a frequency range from 0.2 to 3 Hz. Significant coherence values were found above 0.5 Hz. The estimation of frequency response function revealed the dominant resonance frequencies between 0.60 Hz and 0.68 Hz. On the basis of our results illustrated here, the linear model of standing postural control was further concluded.

• Physical Therapy Rehabilitation Science
• /
• 제8권1호
• /
• pp.40-44
• /
• 2019

Objective: The purpose of this study was to examine the changes in postural stability according to ankle fixation in healthy university students. Design: Cross-sectional study. Methods: Thirty healthy subjects (15 males and 15 females, 20.13 years, 167.49 cm, 65.87 kg) were recruited on a voluntary basis. The BT4 system (HUR Laps Oy, Tampere, Finland) was used to measure the static (standing posture with eyes open and eyes closed) and dynamic (external perturbation and limits of stability (LOS) in the forward, backward, left, and right side) balance abilities. External perturbation was measured by the subject's postural sway velocity and area for 20 seconds after being impacted by a gym ball. Static and dynamic stabilities were measured with ankle joint fixation and non-fixation conditions. Ankle fixation was provided using Mueller tape on both ankle joints. Results: For static stability under the standing posture, there was no significant difference between standing with ankle joint fixation and non-fixation conditions. However, dynamic stability (external perturbation and LOS in the forward, backward, left, and right side) was significantly higher in the standing with the non-fixation condition compared to the standing with ankle joint fixation condition (p<0.05). Conclusions: Our results reveal that ankle joint fixation can influence dynamic stability during standing. Thus, we believe that this result provides basic information for making improvements in postural control and may be useful in balance training for fall prevention.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1504-1508
• /
• 2003

The functional behavior of each body segments were investigated with respect to human standing posture when they were exposed to the horizontal vibration in the sagittal plane. This study is processed by experimental approach. The data is analyzed, both in the time domain and in the frequency domain. Random and multisinusoidal vibration was used as input. The ankle, hip, and head were employed as the significant body segments. High relative movements were present between hip and head, and there was no significant relationship between ankle and head. Variations of visual input produced a significant postural effect.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.106-109
• /
• 2003

Many diverse methods have been developing in the field of biometric identification as human-friendliness has been emphasized in the intelligent system's area. One of emerging method is to use human footprint. Automated footprint-based person recognition was started by Nakajima et al.'s research but they showed relatively low recognition result by low spatial resolution of pressure sensor and standing posture. In this paper, we proposed a modified Nakajima's method to use walking footprint which could give more stable toe information than standing posture. Finally, we prove the usefulness of proposed method as 91.4tt recognition rate in 11 volunteers' test.

• 한국운동역학회지
• /
• 제24권3호
• /
• pp.259-267
• /
• 2014

The purpose of this study was to find the relationship between standing posture biomechanics and physical fitness in the elderly. Physical fitness variables and postural variables for 227 (140 women and 87 men) elderly individuals were tested. Physical fitness tests (Korean Institute of Sports Science, 2012) included 3m sit, walk, and return, grip test, 30 second chair sit and stand, sit and reach, figure 8 walks, and 2 minute stationary march. Postural biomechanics variables included resting calcaneal stance position (RCSP), shoulder slope, pelvic slope, knee flexion angle, leg length difference, thoracic angle, and upper body slope. In statistical analysis, multiple regression was conducted by using stepwise selection method via SAS (version 9.2). Analysis for both men and women revealed significant relationships between physical fitness and age, upper body slope, knee flexion angle, leg length difference. Pelvic and thoracic angle were only related to figure 8 walking and sit and reach in women, while RCSP and shoulder slope had no relationship with any physical fitness variables.