• IE interfaces
• /
• v.10 no.3
• /
• pp.197-208
• /
• 1997

In workplace design, an ergonomic solution should ensure low postural stress in the operator during his/her work. Stress caused by awkward working postures of the trunk, shoulders and legs can result in fatigue, discomfort, musculo-skeletal disorders and nerve entrapment syndromes. Since discomfort and musculo-skeletal disorders are both related to exposure to biomechanical load on the musculo-skeletal system, minimization of discomfort will contribute to reduction of the risk for musculo-skeletal disorders as well. Therefore, in this study, perceived discomfort on the human body joints was measured in the standing postures using the magnitude estimation in order to have a standardized numerical scale for joint discomfort. Nine healthy graduate students participated voluntarily in the laboratory study. The results revealed that perceived discomfort of all the joints increased as the joints deviated from neutral position. Especially, it showed drastic increment on perceived discomfort when deviation from neutral position in each human body joint increased from 75% to 100%. in terms of relative range of motion(R0M). On the basis of these experimental results, a preliminary ranking for assessment of stressfulness of non-neutral postures around the human body joints was suggested.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.4
• /
• pp.267-279
• /
• 2014

Objective: The objective of this study was to define the Dynamic Sitting (DS) through trend analysis and research on the Dynamic Chair (DC) and applied technologies. Background: The effects of changing posture on the human body have been studied to find out healthy sitting postures. It is believed that changing posture is effective in reducing disc pressure on spinal cord and preventing back pain and musculoskeletal disease. But, the definition of DS and trends of DC have not been researched yet. Therefore, trend analysis of DC and its applied technologies are required to define dynamic sitting posture. Method: We researched the type of occupant postures from previous studies. And then, sitting behaviors were classified into three types; (1) sitting and standing, (2) working and studying, (3) taking a rest. Results: Variety shapes of DC and applied technologies were found out. From the result, the trend of DC and applied technology were summarized from three perspectives. ; (1) changing the chair functions according to user's intention, (2) conversion of dynamic chair technologies to office chair mechanism, (3) enables the user to change their sitting posture without operating control device. Conclusion: From this study, we defined dynamic sitting posture and analyzed the trend of DC and its applied technologies. This result might be used to develop an office chair for healthy sitting. But further investigation is required to figure out the technologies and functions for development of healthy chair. Application: The results of the publishing trend analysis might help to determine design concept of office chair.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.4
• /
• pp.265-272
• /
• 2019

Purpose : Excessive computer use frequently results in musculoskeletal disorders of the neck and shoulder such as forward head posture (FHP). The purpose of this study was to investigate effects of neck and shoulder exercise program on spino-pelvic alignment and the correlation between change in head and neck posture and spino-pelvic alignment in FHP. Methods : The study included 44 participants with FHP. The participants performed the exercise for correction of FHP 2-3 times a week for 4 weeks. We examined whole spine X-ray images in the lateral standing position with both arms crossed. We measured anterior head translation distance (AHT), craniovertebral angle (CVA), cervical lordosis (CL), thoracic kyphosis (TK), lumbosacral lordosis (LSL), sacral slope (SS), pelvic tilt (PT), and pelvic incidence (PI) of the subjects. The association between change in AHT and each spino-pelvic parameter was also subjected to Pearson's correlation coefficient analysis. Results : There were statistically significant differences before and after exercise in the parameters of AHT, CVA, and SS (p<.05). Significant negative correlation was observed between the change in AHT and CVA (r=-.768, p<.001), and CL (r=-.388, p<.05). There was significant positive correlation between the change in AHT and SS (r=.328, p<.05), and PI (r=.333, p<.05). However, no significant correlation was observed in change in AHT with that of TK, LSL, and PT. Conclusion : Based on the above results, we conclude that there is a relationship between change in AHT, which is a parameter associated with forward displacement of the head, and that of CVA, CL, SS, and PI after exercise in cases of FHP.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.897-907
• /
• 2023

Purpose: In this study, We aim to estimate a untrained person's three postures using a 2D CNN model which is trained with minimal FFT data collected by a 24GHz FMCW radar. Method: In an indoor space, we collected FFT data for three distinct postures (standing, sitting, and lying) from three different individuals. To apply this data to a 2D CNN model, we first converted the collected data into 2D images. These images were then trained using the 2D CNN model to recognize the distinct features of each posture. Following the training, we evaluated the model's accuracy in differentiating the posture features across various individuals. Result: According to the experimental results, the average accuracy of the proposed scheme for the three postures was shown to be a 89.99% and it outperforms the conventional 1D CNN and the SVM schemes. Conclusion: In this study, we aim to estimate any person's three postures using a 2D CNN model and a 24GHz FMCW radar for disastrous situations in indoor. it is shown that the different posture of any persons can be accurately estimated even though his or her data is not used for training the AI model.

• Journal of Korean Physical Therapy Science
• /
• v.8 no.2
• /
• pp.1059-1064
• /
• 2001

This study is aimed at diagnosing transmutation aspect with the respective of hemiplegia patient's static adaptation of posture which is influenced by anti-gravity excercise, center of gravity shifting movement and segmental movement adaption of the legs and arms by key-point control in the process of Bobatli's treatment approach. The patients for the investigation of this study were selected as a total 17 patients who were doing the physical-therapy in Tae-gu Rehabilitation Center, and diagnosed as hemiplegia patients by Rehabilitation Medicine department in Kyung-buk University hospital. And also, there investigated into temporal transition that keep the attitude with one-leg standing on the ground concerning static attitude adaption on the basis of the before of anti-gravity movement and the after of 4-weeks movement. The findings of this study were as follows: With the respective the time to keep standing pose by one-leg at static attitude transmutation, affected side showed meaningful differences as a l.86/sec, 2.62/sec at 4 weeks later considering the before and after of this experiment.(p<0.01), non-affected side at the aspect of attitude keeping time, but there didn't showed meaningful differences statistically.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.2
• /
• pp.31-40
• /
• 2014

Purpose : To evaluate the effect of cervical strengthening exercise on balance ability in healthy adults. Method : The subjects consisted of forty healthy people. The subjects were divided into two group. The control group(n=14) received no exercise and/or stimulation. The cervical strengthening exercise group(n=14) performed therapeutic intervention using cervical exercise for strengthening of cervical spine muscle. The exercise group were accomplished during 6 weeks(2~3set, 5times/week). All tests were completed before and after experiment. The static balance ability was measured by normal standing when subjects open and close their eyes on GOOD BALANCE SYSTEM, respectively. For each case, the experimental data were obtained in 3 items: mean X speed, mean Y speed and velocity moment. Result : The results of this study were as follows; 1. In the exercise group, the statistically significant difference were shown on X speed and Y speed in the case of normal standing when subjects open and close their eyes and X speed, Y speed and velocity moment in the case of normal standing when subjects close their eyes(p<0.05). 2. In control group, the statistically significant difference were not shown on all posture(p>0.05). 3. There were a statistically significant difference in the X speed and Y speed in the case of normal standing when subjects open their eyes between control group and the exercise group(p<0.05). There were a statistically significant difference in the X speed, Y speed and velocity moment in the case of normal standing when subjects close their eyes between control group and exercise group(p<0.05). Conclusion : The above results revealed that therapeutic intervention for muscle strengthening of cervical there were positive changes to balance ability.

• Annals of Clinical Neurophysiology
• /
• v.4 no.1
• /
• pp.44-50
• /
• 2002

Introduction : Orthostatic tremor develops in the legs while standing up with no weakness, pain or imbalance in the leg and the tremor is characteristically not observed when walking. However there have been some confusions about orthostatic tremor in several aspects. For the past ten years, we have observed 4 patients with orthostatic tremor. In each case tests were performed to investigate the following three important areas of inquiry about orthostatic tremor. Firstly, whether this disorder is an independent diagnostic entity or a variant of essential tremor. Secondly, whether the progress of this disorder is specifically related with standing posture. Lastly, the nature of the pathophysiologic mechanism behind the appearance of the tremor when standing after the lapse of a certain latent period and its disappearance upon the commencement of walking. Methods : Our 4 cases of orthostatic tremor were studied clinically, electrophysiologically, and pharmacologically. Electrophysiological tests included tremor spectrum test and electromyography. Results : We observed the presence of this tremor in several other tonic postures, as well as its absence, in a vertically lifted position from all our cases. Our cases registered a variable tremor frequency between 5 and 12 Hz according to the tremor spectrum test and EMG. Furthermore all our 4 cases demonstrated patterns of both synchronous EMG activity and alternating EMG activity at various times in homologous muscles of both legs. Orthostatic tremor was improved significantly with propranolol as well as clonazepam. Conclusions : From the results of our study we drew the following conclusions. It is probable that orthostatic tremor is simply a variant of essential tremor rather than being an independent diagnostic entity and that in most cases its development is specifically related with muscle contraction rather than merely with the act of standing. Furthermore we discovered a clue in the previously described neural control mechanism that the nuclear bag fibers in the muscle spindle have lag time of several seconds in their response to muscle strength and that their baseline does not reset fully in rapidly moving muscle. This neural control mechanism could offer sufficient explanation for the phenomena of tremor appearance when standing and disappearance when walking in orthostatic tremor.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.1
• /
• pp.67-74
• /
• 2011

The study was constructed an analysis of postures of a expert diver's wearing and taking off with skinscuba equipment using ergonomics tools(REBA, RULA, OWAS) for prevention of Musculoskeletal injuries. This survey is consisted of 4 postures in terms of wearing and taking off : Crouching(alone), Standing(alone), Helping of assistance, Using of stanchion. Their rate of injuries is getting higher due to instability postures, exposed dangers and excessive physical actions. So this study provides basic and educational information for prevention of that. The result is as follows : The result of crouching postures of wearing alone was REBA 9(Ac Level 3), RULA 7(Ac Level 4), OWAS AC 2, and crouching postures of taking off alone was REBA 12(Ac Level 4), RULA 7(Ac Level 4), OWAS AC 4. The result of standing postures of wearing alone was REBA 8(Ac Level 3), RULA 7(Ac Level 4), OWAS AC 3, and standing postures of taking off alone was REBA 8(Ac Level 3), RULA 7(Ac Level 4), OWAS AC 3. The result of helping of assistance postures of wearing was REBA 4(Ac Level 2), RULA 3(Ac Level 2), OWAS AC 2, and standing postures of taking off alone was REBA 4(Ac Level 2), RULA 4(Ac Level 2), OWAS AC 1. The result of using of stanchion postures of wearing was REBA 3(Ac Level 1), RULA 3(Ac Level 2), OWAS AC 1, and standing postures of taking off alone was REBA 3(Ac Level 1), RULA 3(Ac Level 2), OWAS AC 1. Especially both postures of wearing and taking off alone showed high results in the analysis of postures using ergonomics tools(REBA, RULA, OWAS).

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.923-926
• /
• 2000

This paper concerned with the patterns of foot-floor contact and electromyography activities of the lower extremity of the body during the termination of human gait. The termination of human gait is defined as the transition from a steady-state gait to a quiet standing posture. The transition between these two states has not been extensively studied and defined. There appears to be a critical period in the gait cycle that the decision to terminate gait or continue to take an additional step must be made.

• Journal of Industrial Convergence
• /
• v.7 no.1
• /
• pp.33-43
• /
• 2009

The purpose of this study was to analysis to jobs inducing the Musculoskeletal Disorders(MD) and improve the working environment. The case study was conducted at S company where makes radiator case of heavy profile equipment. Most of works are plating and welding. Bending and welding are works which induce MD. The adjustable workstation and fatigue prevention mat were recommended for the welding and bending. A standing posture was recommended for the welding.