• 제목/요약/키워드: standard truck

검색결과 74건 처리시간 0.028초

표준트럭의 차별적 적용 방안 연구 (A Study on Applicability of Diversified Truck Weight-to-Power Ratios)

  • 오흥운
    • 한국도로학회논문집
    • /
    • 제8권1호
    • /
    • pp.89-98
    • /
    • 2006
  • 오르막차로 설계에 쓰이는 표준트럭의 중량/마력비는 200 lb/hp로 알려져 있다. 그 값은 일반적으로 다양하기 마련인 지역간 트럭의 분포를 일정하다고 간주하여 트럭의 성능을 한가지로 표준화시킨 값이다. 또한 실제 교통량 중에서 트럭구성비를 측정하기보다는 그동안 전국범위의 트럭 등록대수 기준으로 표준트럭화 시킨 값이다. 따라서 표준트럭의 중량마력비는 지역적 산업적 트럭의 다양성이나 실제 트럭분포와 거리가 있다고 할 수 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 실제 트럭 구성비에 지역특성을 반영한 다양한 표준트럭의 중량마력비에 대해 검토하였다. 본 논문을 위해 전국에 걸쳐 고속도로 요금소에서 측정한 개별트럭의 중량마력비를 사용하였다. 지역적 분석을 위해 전국 8개 지역으로 나누고, 지역별 중량/마력비를 특성화하여 현재 단일기준의 지역별 적용성을 검토하였다. 분석결과 전국의 표준트럭은 208 lb/hp로 현재의 200 lb/hp와 8 lb/hp 차이가 나며, 지역별로 분석한 결과 170 lb/hp $\sim$ 230 lb로 현재 기준과 30 lb/hp 내외의 차이가 나는 것으로 나타났다. 그 결과로 지역별 트럭분포의 격차가 있음을 확인할 수 있었고 전국적인 지역특성을 반영한 세가지의 중력마력비가 제안될 수 있었다. 다양한 표준트럭이 설계에 반영이 되면 두가지 효과가 기대된다. 즉 트럭과 승용차의 오르막차로에서의 속도차 때문에 발생하는 추돌사고를 줄이고 또한 특정지역에서 오르막차로 건설비를 줄이는 것이 가능할 것으로 생각된다.

  • PDF

오르막 경사구간에서 중차량 속도감소를 고려한 아스팔트 포장구조체 내부거동 분석 (Estimation of Asphalt Pavement Internal Behavior under Decreasing Truck Speed on Uphill Lanes)

  • 서주원
    • 한국도로학회논문집
    • /
    • 제16권2호
    • /
    • pp.53-59
    • /
    • 2014
  • PURPOSES : This study estimated an asphalt pavement internal behavior under uphill lanes considering reducing speed of heavy truck on uphill slope. METHODS : Truck performance curve which has been adapted to "Korea Highway Capacity Manual" was analyzed. And asphalt pavement internal behaviors were estimated with Multi-layered elastic analysis using KPRP(Korea Pavement Research Program) dynamic modulus prediction equations. RESULTS : As a result, it is shown that when the standard truck drives 2.0 km at a speed of 80 km/h in 8% climbing slope, it's speed reduced to 25.4 km/h, at same time frequency in asphalt layer decrease to 67.2% and it's dynamic modulus degrades to 30.9%. Based on these results, internal behavior as decreasing vehicle speed on uphill lanes were estimated. CONCLUSIONS : From the results of Multi-layered elastic analysis, internal behavior showed that when the standard truck drives 2.0 km at a speed of 80 km/h in 8% slope on uphill lanes, vertical strain was increased to 44.4% at the bottom of surface course, and lateral tensile strain was increased to 20.5% at the bottom of base course.

작업차량 장착용 충격흡수장치(TMA) 성능평가기준 수립 및 개발 연구 (A Study on the Development and of Establishment Performance Evaluation Criteria of Working Truck Mounted Attenuator)

  • 주재웅;장대영;박제진
    • 한국안전학회지
    • /
    • 제27권6호
    • /
    • pp.185-191
    • /
    • 2012
  • Rear collisions to expressway work trucks result many casualties these days. But, currently, no special measure are being taken except deploying sign trucks behind the working trucks. In the U.S and Europe, trucks with TMA(Truck Mounted Attenuator) are being deployed behind the working truck, which is regarded as the standard method for work area safety, thereby reducing the fatality rates and property damage tremendously. Also, standard for the performance of TMA are established and TMA can be used in the field only when it satisfies the standard. In Korea, neither the standard for nor any guide to the TMA exists. In the situation some manufacturer developed TMA without proper performance evaluation and marketed limited number of TMAs in the field. In the study, NCHRP350, which is the performance standard of expressway safety features of U.S. and materials related to the TMA standard in Europe have been reviewed to establish the Korean performance criteria. Based on the review, and incorporating existing Korean standard for crash cushions, domestic standard for TMA has been proposed and applied in developing Korean TMA and crash tested it to verify the performance. The original design developed was crash tested and modified. The newly proposed design was studied using impact simulation program several times. Modifications were made after each simulation and prototype was built and crash tested as per the newly established TMA performance criteria.

하중효과를 고려한 차량하중 특성분석 (Characteristics of Live Load Effects on Bridges)

  • 김상효;박홍석
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1992년도 봄 학술발표회 논문집
    • /
    • pp.126-133
    • /
    • 1992
  • The structural soundness of bridges is mainly damaged by overloaded heavy vehicles. The increasing volumes of overloaded heavy vehicles has been indicated as serious state. As results several countries have revised their bridge load codes. However, because of variety of truck types and their weights it is difficult to develop rational standard truck loads. In addition the common practice that only one design configuration of standard truck is adopted to design variety of bridges causes further difficulties. The objective of the study is to investigate the statistical characteristics of vehicle loadings based on survey data col looted, in which some major factors, such as vehicle configurations, vehicle freights, traffic modes, etc. are incorporated.

  • PDF

직교 이방성 판 이론을 이용한 바닥판 활하중 모멘트 산정식 개발 (Development of Live Load Moment Equations Using Orthotropic Plate Theory)

  • 안예준;남석현;박장호;신영석
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2006년도 정기 학술대회 논문집
    • /
    • pp.749-756
    • /
    • 2006
  • Because of the orthotropic elastic properties and significant two-way bending action, orthotropic plate theory may be suitable for describing the behavior of concrete filled grid bridge decks. Current AASHTO LRFD Bridge Design Specification(2004) has live load moment equations considering flexural rigidity ratio between longitudinal and transverse direction, but the Korea highway bridge design specification(2005) doesn't. The Korea highway bridge standard specification LRFD(1996) considers an orthotropic plate model with a single load to estimate live load moments in concrete filled grid bridge decks, which may not be conservative. This paper presents live load moment equations for truck and passenger car, based on orthotropic plate theory. The equations of truck model use multiple presence factor, impact factor, design truck and design tandem of the Korea highway bridge standard specification LRFD(1996). The estimated moments are verified through finite-element analyses.

  • PDF

도로교 차량하중 및 통행특성에 관한 연구 (A Study on Bridge Live Loads and Traffic Modes)

  • 김상효;박흥석
    • 대한토목학회논문집
    • /
    • 제12권4호
    • /
    • pp.107-116
    • /
    • 1992
  • 도로교의 안전수준에 영향을 미치는 것은 주로 과적중차량이다. 계속 증가하는 과적중차량의 문제는 오래전 부터 매우 심각한 상태인 것으로 지적되어오고 있다. 따라서 여러나라에서 차량하중의 특성에 관한 연구가 활발히 이루어지고 있으며, 일부에서는 이러한 변화를 반영하기 위하여 도로교 설계활하중을 개선하였다. 본 연구에서는 차량하중 및 통행특성의 자료를 수집하여 차량형식, 차량총중량, 축중분배, 차종혼입율, 연행특성 등을 분석하고 합리적인 모형을 제시하였다. 또한 차량하중이 도로교에 미치는 하중효과를 교량형식에 따라 분석하여 현행 도로교 설계관련 규정들이 내포하고 있는 안전수준에 대한 분석을 실시하였다.

  • PDF

우리나라 대표 트럭의 총중량/엔진성능 재정립 (Revision of Representative Truck's Weight to Power Ratio in S. Korea)

  • 김영록;정준화;이석기
    • 한국도로학회논문집
    • /
    • 제17권4호
    • /
    • pp.1-9
    • /
    • 2015
  • PURPOSES : The purpose of this study is to revise the weight to power ratio of the representative truck in S. Korea. So far, S. Korea has been using the unit lb/hp, and the construction machines were not considered in the evaluation of the performance of trucks. METHODS : This study was performed to recommend the use of ISO system of units, and to analyze the weight to power ratios of the representative trucks in S. Korea, including the dump trucks, concrete mixer trucks, and asphalt and concrete diffusers. RESULTS: From this study, the 85 percentile value of the weight to power ratio of the trucks in S. Korea's was found to be 103.6 kg/kw. CONCLUSIONS : The performance standard for the representative truck has to be increased upward, considering the travel pattern of the dump trucks, concrete mixers, and asphalt and concrete diffuser trucks, travel distances, narrow area (work zone) of operation, and the saving in construction budget for climbing lane. Based on this study, the weight to power ratio of the representative truck in S. Korea could possibly be revised to 100~110 kg/kW.

SMART Highway 오르막차로 설치 필요성 및 기준 연구 (Necessity of Climbing Lane on SMART Highway and its Design Guidelines)

  • 김상구;김영춘;심대영;이용문;김종원;김흥래
    • 대한교통학회지
    • /
    • 제32권5호
    • /
    • pp.473-486
    • /
    • 2014
  • 본 연구는 SMART Highway에서 종단선형에 따른 표준트럭의 교통영향을 분석하여 오르막차로 설치 필요성을 검토하고 오르막차로 필요 시 경사길이에 따른 속도변화 곡선을 구하여 제시하는 것을 목적으로 한다. SMART Highway는 미래 고속도로이므로 표준트럭의 실제 주행실험이 불가능하여 VISSIM 시뮬레이션 모형을 이용하여 오르막구간에서 표준트럭의 속도변화를 구하였다. 오르막차로의 표준트럭은 100kg/kW(170lb/hp)로 결정하고 진입속도는 장래 여건을 고려하여 90, 100, 110km/h로 설정하였다. 본 연구결과는 SMART Highway 환경하에서 종단선형 1, 2%에서 오르막차로는 필요하지 않고 3%의 오르막구간에서만 설치 필요성이 있음을 제시하였다. 3% 종단선형에서 오르막차로를 설치하기 위해 진입속도 90, 100, 110km/h에서 경사길이에 따른 트럭의 속도변화 곡선을 제시하였고 오르막차로 설치 위치도 제시하였다.

제조업에서 지게차에 대한 안전보건 기준에 관한 규칙 개정 방안 (Proposed Revision of Standard on Articles for Forklift Trucks in Manufacturing Industries)

  • 신운철;이홍석;박재학
    • 한국안전학회지
    • /
    • 제28권4호
    • /
    • pp.33-37
    • /
    • 2013
  • A forklift truck, commonly used for transporting heavy materials in manufacturing industries, etc., is a useful machine. However accidents occur frequently during the operation of the machine. In order to prevent accidents it is necessary to examine the current safety regulations on a forklift truck. Because the regulations have not revised for a long time, they do not reflect the rapidly changing environment of industries. Proposed revision of standard on articles for forklift trucks was presented after analysing the causes of occurred injuries, comparing domestic standards with international standards and examining the survey results. We analyzed the safety regulation articles and the injuries according to the type of work conducted with forklift. The major differences in safety regulations between Korea and the major foreign countries were investigated. The opinions of field workers on the safety regulations were surveyed using e-mail or interview. As a result, it was found that preventing workers from contacting with the forklift is very important. To prevent accident due to movement of a stopped forklift, actions are necessary to prevent slip of a forklift. Also supervision is required to make workers fasten safety belt and to prohibit workers from using a forklift for undesignated purpose.

Lab-based Simulation of Carton Clamp Truck Handling - Preliminary FEA and Analysis of Handling Test Courses

  • Park, Jongmin;Kim, Jongsoon;Kim, Dongkeon;Chang, Sewon;Kim, Ghiseok
    • 한국포장학회지
    • /
    • 제23권3호
    • /
    • pp.183-190
    • /
    • 2017
  • Carton clamp truck is widely perceived as the high-efficient handling equipment of factory premises and warehouse by its capability of palletless handling. Therefore, the significance of a lab-based handling simulation is becoming higher with the growth of clamp truck usage. In this study, preliminary FEA and design of handling test courses for the lab-based simulation of carton clamp truck handling were performed, and the PSD analyses were performed for the modified one for the test course proposed by Park et al. (2017) as well as ASTM D 6055 and ISTA 3B standards. For the vibration in all directions, the vibration energy intensity analyzed by ISTA 3B standard showed higher than that by the other two cases. A FEA was performed for the handling operation of the sudden stop of the clamps after lifting the target HCP (heavyweight refrigerator corrugated package, w=180 kgf) up to the specified height. The slip distance between the clamp arm and the target HCP was 0.85 mm. The simulation result of 0.85 mm was 3.7 times lower than the experimental result (3.2 mm) obtained by Park et al. (2017), and it was estimated that the deviation comes from both the experimental error by weight imbalance of target HCP, and excessive simplification during the FE modelling of target HCP.