• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.21-27
• /
• 2018

The purpose of this study is to develop a SOP (Standard Operating Procedure) for a distribution board that can monitor the leakage current of a load distribution line in real time. The developed distribution board was fabricated by applying IEC 61439-1. It consists of the distribution board and an alarm device. The work process for making the distribution board was compliant with the KEMC (Korea Electrical Manufacturers Cooperative) regulations. And the AC distribution board range is 1,000 V. In addition, the voltage in DC is less than 1500 V. The distribution board receives a 3-phases and 4-wires power supply system and can supply power to the load of a maximum of 32 single or three phase distribution circuits. Also, leakage current measured on the power distribution board was used by sensors installed. The SOP of the developed distribution board consists of the installation standards for the short circuit alarm device and sensor, the surge protection device, switches and indication lamps, and other devices. The operation procedure was prepared so that each manufacturing step of the distribution board must be confirmed by the persons in charge of preparation, production, quality control and approval before moving forward to the next step.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.801-808
• /
• 2007

Rotem Company has designed and manufactured bogie for Diesel Multiple Unit (DMU) according to the European standard UIC615-4, which si normally used for designing bogie frame. Because the countries located in Middle East do not have their own regulations for bogie design, most of running bogies in Middle East are designed by using European standard UIC615-4. UIC615-4 specifies the loads that bogie frame should withstand, indicates the way of material data to be used and the principles to be during verification by analysis and test. The bogie frame depends on the load conditions and magnitudes which are subjected to during service and characteristics of materials they are manufactured from. From the above reason, Rotem Company has performed Finite Element Analysis and load tests on the bogie frame according to UIC615-4. This research contains the results obtained by the analysis and the load tests. Also, this research verifies that the bogie frame has a static strength and fatigue strength. The analysis is carried out using I-DEAS 12 NX Series and specially designed test jigs and equipment are used for the load tests.

• Journal of the Korean housing association
• /
• v.26 no.5
• /
• pp.61-70
• /
• 2015

According to "The regulations regarding the residential construction standards", residents' common spaces are restricted by the standards on building facilities. In a typical apartment complex, residents' communal facilities are represented by a children's playground, a elderly social station, and a management office. However, these residents' communal facilities do not reflect residents' composition characteristics. Multidisciplinary research and experimentation to enable the community of housing complex are being actively conducted. In these situation, we observed institutional improvement about installing standard of community space, and analysed the tendency. The purpose of this study is to propose practical institutions to review the institutional improvement. We conducted a case study where was renovated the community space according to the new standard. As a results, the installing standard of the community space has changed in the direction to increase the autonomy of resident. These results raise the practical performance of the community space, and it has the effect of increasing the satisfaction of the residential environment. The results of this study suggest an alternative to the institutional aspects and planning aspects for community activation in housing complex.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.2
• /
• pp.55-64
• /
• 2018

Purpose: The ward division is a representative part of the hospital, where a variety of user activities are performed. Users can be broadly categorized as patients and carers, visitors, and medical staff (doctors and nurses). The relationship between these two is a major issue with ward planning as the patient's place of life centers around the hospital room and the task of the clinical workforce centers around the nursing station (NS). Against this backdrop, the study divides the ward units of the General Hospital of China into patient areas, medical team areas, supply areas, and public domain, with the focus on the ward areas affecting most significantly in the hospital patients. Methods: The theoretical advance studies of the standard ward unit are identified by the associated guidelines, articles, and documentation. Results: This study is a summary analysis of relevant regulations, reference literature, and drawing data from the target hospital. Further work is expected to be undertaken, including further surveys and observational surveys, to produce more detailed results. Implications: It is expected that the research in this paper will provide an effective reference for the future research of China General Hospital Ward department, so as to promote and improve the work system of China General Hospital Ward department.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.1
• /
• pp.95-106
• /
• 2008

Eco-friendly material and implementation methods have become important along with the existing standardized maintenance concept for the irrigation and flood control. However, the intrinsic function of the hydraulic structure is water supply and disaster prevention. Therefore, the material and work methods should be considered both eco-friendliness, durability and safety which are prerequisite elements to maintain the engineering function. In this study eco-friendly material and work methods would be classified into the vegetation based system, eco-friendly concrete system and stone-material system according to the characteristics of material. The quality standard for durability followed KS specification and related regulations. The quality standard for safety and eco-friendliness was set after literature review, and the database was developed using the standard. The structure applicable to onsite - the eco-friendly material and work method were classified based on the function and material of the hydraulic structure. Finally, database has been established for convenient management and selection of the proper material and work method. The eco-friendly material and work method could be searched easily for the convenience of the users, and the web-based data system has been developed for continuous registration of the material and work methods to be developed in the future.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.143-150
• /
• 2012

In Korea more than 38,000 types of hazardous material(HAZMAT) are distributed, accordingly the accidents during transportation are also increasing. The agencies related to HAZMAT such as Environment Ministry, National Emergency Management Agency and National Police Agency have their own regulations. However, the classification criteria of HAZMAT are different to each other, which causes many problems in response to transportation accidents. In this study the classification standard of HAZMAT and the classification code using CAS number are suggested to manage HAZMAT efficiently. Through efficient management and standard classification of HAZMAT, the rapid and systematic response to transportation accidents related to HAZMAT is expected to be possible.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.612-618
• /
• 2007

There are a lot of openings, holes and slots in ship structural members. It is not easy to solve the troubles around the openings adequately at the detail design stage, because there are a lot of concerning locations. There are not also clear design rules of classification societies and it is not possible to apply direct calculation for all the concerning members. Therefore, it is necessary to set up simplified approach such as a standard or guidance in order to decide the opening design quickly. For this study, guidance and regulations of each classification and several companies were surveyed. Grillage analysis and the refined mesh method were used to evaluate the strength around hole considering boundary condition and more detailed member arrangement. As a result, the standard for opening design was established and verified.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.2
• /
• pp.27-35
• /
• 2019

Purpose: This study is to address the spacial composition of a standard ward and bedroom size for sake of infection control and efficient medical service. Methods: Spacial composition of a standard ward has been proposed by comparative analysis of 5 big hospitals' wards. Bedroom sizes have been explored on the ground of Health care facility regulations from Korea, USA, Australia and Canada. Of course, Literature and field survey have been conducted in order to draw out various bedroom sizes. Results: 16 basic and some other additional spaces have been proposed for the composition of hospital standard ward. Area of Single bedroom is $11.6m^2$, and that of multi-beded room is $7.4m^2$. Bed to bed Clearance is 1.5m, spacing between bedsize and hard wall is 0.9m in 1~2 beded room, 0.75m in 4-beded room. Space clearance between Foot side of bed and curtain is proposed as 0.3m and additional 0.9m is necessary for the circulation. Implications: The result of this study can be applied to the new cons.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.24-29
• /
• 2021

In order to prevent automobile accidents internationally, advanced safety devices are actively being developed. Among them, Auto Emergency Brake (AEB) function and Forward Collision Warning (FCW), which are used to prevent or reduce frontal collision, have been studied for a long time, and are being researched by various manufacturers to develop better performance. In fact, in the case of large vehicles, it is mandatory for AEB to be installed in Korea. Accordingly, a variety of Vehicles equipped with AEB and FCW are coming out, and inspection of these mounting devices is a necessary system in the future. This study confirms how AEB and FCW are currently assessed in regulation and the New Car Assesment Program (NCAP), This is a basic study of the matters to be considered in preparing AEB and FCW inspection standard by checking the performance of vehicles equipped with forward collision protection and identifying the vehicle's sensitivity, range and speed of radar sensors, and target vehicles based on CAN communication data.

• Journal of Korean Academy of Nursing Administration
• /
• v.5 no.2
• /
• pp.317-336
• /
• 1999

Official nursing education of Korea under Japanese rule began in order to make the communication possible among Japanese medical men and Korean patients. It could generate high standard nurses from the beginning. Nurses licensure began in 1914 and the graduates of official nursing schools could get nurses licensure without further test. Official nursing education became the standard of R.N. education. The curriculum emphasized on Japanese and ethics first, and in order to produce nurse, practice second. In 1920 the shortage of nurse became serious problem, so the Japanese colonial authorities set up 5 official nursing school in large scale. In 1922 they revised the relevant laws and regulations to make the nursing licensure pass all over Japanese ruling area. 8-year preliminary education and 2 year curriculum became standard of official nursing education after then. Other nursing schools should satisfy this standard to let their graduate get nurses licensure without further test. Curriculum was revised to satisfy the dual goal of 'good housewife' and 'good nurse'. Every official nursing school tried to raise educational standard Nursing science was specialized and more emphasis was put on the occupational education. From the late 1930s, Japanese desperately needed additional manpower to replenish the dwindling ranks of their military and labor forces. They tried to produce more nurses by increase nursing school. Students had to do wartime work instead of study. Younger students could enter nursing school, and general school could produce R.N. In conclusion, nursing education of Korea under Japanese rule was determined by the official nursing education. The Japanese colonial authorities lead the official nursing education. It made nursing education fixed early and produced high standard R.N. But it made nursing education withdraw in late Japanese rule period. Nursing education of Korea began quite weak in the need of nursing and Korea herself. The weakness became a subject of nursing education of Korea after Japanese rule to produce better R.N..