• Journal of Korea Ship Safrty Technology Authority
• /
• s.23
• /
• pp.2-13
• /
• 2007

With the effectuation of the amendment of MARPOL 73/78 on 5 April 2005, enforcement regulations of Marine Pollution Prevention Act were revised in domestic on 12 March 2005 that double hull structure was required to the small single bottom oil tankers under DWT(deadweight tonnage) 500 ton for the protection of the marine pollution casualties. The objective of this study is to develop the double bottom structure of small oil tanker under DWT 500 ton with superior crashworthiness and to establish its suitable standard to double bottom structure. The promoting strategy of this R&D is classified into the crashworthy structural analysis of small oil tankers using LS/DYNA3D code and the examination of their damage stabilities according to tonnage. It could be thought that the desirable inner bottom height should be above the B/7.5 and its minimum height 0.65m for the domestic small oil tanker under DWT 500ton.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.3
• /
• pp.1-9
• /
• 2009

The present management of the domestic and international advanced enterprises is transferring the systems and the regulations to the prevention system management. Expecially, KOSHA (Korea Occupational Safety & Health Agency) in Korea has supported to set up the OSHMS (Occupational Safety & Health Management System) by KOSHA 18001 since 1997. But small & medium enterprises (SMS) has many difficulties to set up the OSHMS system because of limited natural and human resources. In this study, the rating system as a judgment method of an OSHMS based on the certification standard of the OSHMS, which was suggested in previous study, was developed for SMS to adopt voluntarily the OSHMS, certify KOSHA 18001, and improve the safety and health level.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.97-103
• /
• 2010

In this paper, worldwide standards and regulations on in-band/out-of-band emission characteristics of DTV broadcasting equipments are reviewed, and emission mask requirements of several equipment types are analyzed. Out-of-band emission mask draft suitable for DTV repeater is proposed and its usefulness is evaluated and verified in the experiments. Using the proposed standard, small-sized and cost effective DTV repeater can be implemented to broaden DTV broadcasting coverage for digital switchover.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.310-314
• /
• 2016

Background: FCTC10 container is designed to transport $^{60}Co$ radioactive sources used in irradiation industry. It belongs to Type B(U) Category III (yellow) package when being loaded with a $^{60}Co$ source of $1.8{\times}10^5$ Ci. Materials and Methods: The container is constituted of shielding container, basket, protective cover and bracket. Shielding ability is provided mainly by stainless steel shells, tungsten alloy and lead among steel shells. Radiation level around the container has been calculated with both Monte Carlo simulations and measurements. Results and Discussion: It is proven that the shielding performance of the container fulfills the requirements in GB11806-2004 (Regulations for the safe transport of radioactive material, China Standard Press). Exposure doses to workers and to critical groups of public were calculated based on hypothetical exposure scene according to transport practice experience. Conclusion: The results show that doses to workers and public are less than the constraint dose considered in design, and the radiation level would be increased less than a factor of 2 under design basis accidents.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.5
• /
• pp.37-45
• /
• 2007

WTO/TBT requires that, for technical regulations affecting trade, technical regulatory requirements must be specified where possible in terms of performance rather than design or descriptive characteristics. The movement which made "performance" a keyword in landscape architecture was activated in Japan, one of the leading counties in performance-based regulatory system(PBRS). The Japanese recent movement of systematization activity on performance-based standards and specifications was reviewed and operational applications for performance-based regulatory system in South Korea are summarized as follows: 1. The establishment of performance standards that can be properly evaluated by assessment indicators is necessary in cases when quantitative evaluation is difficult. 2. As a preparation for PBRS, a brief procurement system by technical proposal for the landscape design and construction is necessary. 3. As a preparation for PBRS, activation of an environmental performance evaluation on experimental construction is necessary. 4. As a preparation for PBRS, a certification system of environmental performance on various landscape construction methods is necessary. 5. The Private Finance Initiative Project is the most similar to PBRS therefore, activation of the Private Finance Initiative Project is necessary in landscape architecture projects for park rehabilitation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2B
• /
• pp.203-211
• /
• 2009

In the area of the telecommunication industry, a few products have been developed before related technical regulation has been made. Government agency is forced to make a final decision on whether a requested product is sellable in the market only after the structure and function of requested product is tested. The introduction of a 'SDoC', and 'privatization of technical regulation' to our legal system could be a solution for minimizing the situation mentioned above. Both 'SDoC' and 'privatization of technical regulation' are systems which are capable of minimizing the appearance of products without technical regulations. Furthermore, 'Temporary approval system' would provide a government agency with administrative procedure for new product without technical regulation.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.694-699
• /
• 2003

Rotem Company has designed and manufactured a railway vehicle body according to the European standard EN 12663, which applies to all railway vehicles within the EU(European Union) and EFTA(European Free Trade Association) territories. EN 12663 specifies the loads vehicle bodies shall be capable of withstanding, identifies how material data shall be used and presents the principles to be used for design verification by analysis and test. The structural design of railway vehicle bodies depends on the loads they are subjected to and the characteristics of the materials they are manufactured from. However, the structural requirements of EN 12663 are very different from those of existing Korean and Japanese regulations and standards. Therefore, in order to fulfill the structural requirements, Rotem Company has carried out Finite Element Analysis (FEA) and has performed load tests on the vehicle body according to EN 12663. This research contains the results obtained by the analysis and the load tests. The analysis is carried out using I-DEAS Master Series 8 and specially designed test jigs and equipment are used for the load tests.

• Journal of Industrial Technology
• /
• v.30 no.A
• /
• pp.17-23
• /
• 2010

Recently, a large number of open-pit mines are planning to change their mining method to underground types because the environmental concerns and legal regulations are increased with a rise in the standard of living. The K silica mine, which is one of them and located in Kyunggi province, is planning the establishment of a vertical shaft which will be used for ore-pass channel in their new glory hole mining method. This vertical shaft will be designed to join with a horizontal gangway excavated from the ground level. In this new mining system, the excavated ore particles will be stored inside a shaft and transported out with a help of a conveyor belt. Therefore the hang-up of ore particles in a shaft, the control of gate at the bottom of a shaft, the installation of dog-leg at the gate should be investigated identically. In this study, the PFC-2D code which is one of the discrete element numerical methods has been applied to simulate the particle flow mechanism in a shaft, and the optimum mine design has been proposed to maximize the productivity and to minimize the system damage.

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.219-223
• /
• 2008

In 2006, as a means to minimize early corrosion failure of ships, thus to enhance marine safety, International Maritime Organization (IMO), proposed a mandatory regulation for Performance Standards for the Protective Coatings (PSPC) for ballast tanks of newly built ships to satisfy 15 years of target useful life. In this regulation, several unprecedented strict rules are adopted as minimum, mandatory requirements for protective coatings of ship's water ballast tanks, and all type of ships sailing international sea are subjected to this regulation which is to be effective as early as June of 2008. The PSPC addresses many technical issues in the areas of surface pretreatment (primary and secondary), coating materials, coating application procedure and inspection as well as necessary documentation. The PSPC rules are new and unproven concepts, which calls for rigorous incorporation of reality-based evidences currently available, since there are no practical experiences in terms of the validity of the PSPC rules. There has been much controversy surrounding these regulations and considerable effort has been made by both shipyards and ship owners alike to achieve a performance standard for ballast tank coatings, which is acceptable to all. In this paper, the background and overview of the PSPC rules are given, and several issues in the PSPC are reviewed as a base to achieve robustness of the proposed PSPC, which will serve as a means to minimize early corrosion and to ensure 15 year target useful life of ships.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.118-128
• /
• 2017

Many countries have been developing BIM-based building code checking system and studies in the utilization of Industry Foundation Classes (IFC) in building code checking. IFC is the open standard of BIM format. Currently, there is a disadvantage that could not include all of the attribute for the regulations of each country and there is the problem with the interoperability of the different defined IFC approach between BIM software. This study focus on developing, derived object and property by comparing through domestic regulation and IFC2x3 specification provided by the buildingSMART and classified review type depending on the interoperability of derived information. According to classified review type, the IFC data structure was established and property mapping contents were developed by including BIM software compatible information and creating a type of review plan. When the developed property mapping contents are applied into BIM-based building code checking system, checking of the BIM data generated from various fields is made effective and thus improving the interoperability of information.