• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.633-635
• /
• 2007

To cope with increasing power demand in metropolitan area, the power system in Korea has equipped with unit generator of large capacity, high density and uneven distribution, and transmission line of long distance, large capacity and high voltage. As the power system growing up enormous, it has become difficult to maintain the standard voltage in case of radical fluctuation of load or severe change of voltage by power system fault for its weakness of responsive characteristics although the power condenser has been installed to solve the unstability by lack of reactive power. Consequently, we review harmonic wave production and control characteristics to solve unstability problem of voltage in northern metropolitan, to reduce transmission restriction cost and to minimize load shedding by relocation of SVC (Static Var Compensator), which is highly effective for improvement of responsive characteristics for radical voltage fluctuation.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1999년도 추계 학술대회지
• /
• pp.102-144
• /
• 1999

The major problems of food crop cultivation in Korea are low yield of most crops except rice. inefficient cultivation techniques for aged farmers. and low international competibility. Therefore, development of cultivation techniques of food crops should aim the yield. quality improvement, labor reduction and production cost. The primary issue for increasing the yield of soybean, barely and wheat is to reduce the yield gap between the farmer's yield and recommended ones of experiment station. More advanced cultivation techniques needs to be developed. and/or the conventional breeding methods to be reconsidered. The newly developed labor-saving mechanized technique needs to reduce labor hours , and the cost of agricultural implements and machineries. In other words the labor-saving mechanized technique should be developed based on the improvement of total farming system as well as systemic fundamental innovation of cultural methods. The efficiency of solar energy use in food production of Korea in 1997 is as low as $0.52{\%}$ so there is much room to increase yield. It is recommendable that the concept of food Production should be changed to energy Producing efficiency Per unit area basis from volume and weight of food materials. Moreover, introduction of resonable cropping system is needed to increase yield of main crops, farmer's income, solar energy use efficiency, and decrease of land service expenditure. Current cropping system emphasized on economic crops. especially in vegetables , is not desirable for resonable use of arable land. stability of agricultural management and staple food crop self-sufficiency ratio. It is desirable to increase food crops . that are energy of carbohydrate and protein rich and land dependent crops. in cropping system. And the agronomist should develop the cultural methods to replace food crops for food self-sufficiency and stable farming management instead of economic crops in current cropping system. Low-input and environmentally-sound crop cultivation techniques, especially nitrogen-reducing culture technique which is directly related to food crop quality, also needs to be developed urgently. The extended cultivation of corn in upland and barely and wheat in lowland as a feed stuffs is recommended to prevent further decrease of food self-sufficiency ratio, which is mainly caused by the high reliance on imported feed grain. It is also considered that the calculation and presentation methods of standard agricultural income needs to be improved. The current calculation method uses unit land area of 10a regardless of crop kinds , characteristics of agricultural management and cultivation scale. So, it is apt to lead misunderstanding of farm income value. Therefore. it should show an income of average farmers for certain number of years. Research and developing system for food producing is not desirable because they are conducted currently individual crop and mono-culture basis. But actual agricultural income is usually earned by cropping system including upland and lowland. For example. the barley and wheat is usually cultivated in double cropping system. The cooperation among research institutes such as university agribusiness. government and farmers is indispensible. The public information and education on importance and consumption habit of food crops is necessary in Korean society to increase food self-sufficiency through nationwide cooperation.

• 한국항공우주학회지
• /
• 제47권10호
• /
• pp.728-737
• /
• 2019

본 연구에서는 초소형 위성을 이용한 위성 편대 및 군집 운용 시 실시간으로 위성 간의 상대 위치 정보를 제공할 수 있는 통합 항법용 모듈형 온보드 컴퓨터(On-board Computer, OBC)를 개발하였다. 모듈은 구조적으로는 큐브위성의 기준 규격에 맞게 설계하되 사용자가 원하는 무선 통신모듈 및 항법용 Global Positioning System(GPS) 장비를 적용할 수 있도록 확장성을 고려하였다. 개발된 OBC는 제품 개발 및 제작 이후 야외 테스트를 통해 저전력 Micro Controller Unit(MCU)로 군집 운용을 수행하는 초소형 위성들의 통합 항법 및 실시간 데이터 동기화 요구 처리속도를 만족함을 확인하였다. 또한, 열진공, 방사능 시험을 거쳐 우주급 환경에서 정상 작동함을 확인하였으며, 진동시험의 경우 underfill 공정을 추가하면 정상적으로 요구조건을 만족할 수 있음을 확인하였다. 이를 통해 향후 수요가 늘어날 군집 운용을 위한 위성군 개발의 핵심 부품인 OBC의 대량생산 체계를 구축하였다.

• 산업경영시스템학회지
• /
• 제4권4호
• /
• pp.35-42
• /
• 1981

This paper grasped the labor productivity actual condition by the standard of per unit working hour and production about the main products of our country's industrial the main materials and could understand the average of our country's labor productivity as compared this with the labor productivity actual condition of Japan. As the point at issue of analitical result. 1. Low a matter of thinking about productivity. 2. Have a lot of difficult problem in an industrial part. 3. Have the point at issue on technical development and accumulation. 4. Have the point at issue on management. As a countermeasure about these. 1. must convert the way of use of industrial policy. 2. must make a housing development and special serialization of a small and medium enterprise. 3. must establish an organic technical development system. 4. must grope the policy of management rationalization.

• 한국조경학회지
• /
• 제50권4호
• /
• pp.20-36
• /
• 2022

본 연구는 가로수 관리의 합리적인 표준품셈 항목 및 적정 단가 설정을 통한 고품질 가로수 관리의 기초자료 제공을 목적으로 하였다. 현재 가로수 관리항목은 가로수 전정을 제외하고, 일반 조경수 품셈을 가로수 관리 품셈으로 활용하고 있다. 또한 한국전력공사에서는 표준전기품셈의 가지치기 항목을 적용하여 표준품셈 대비 강전정의 경우 평균 51%, 약전정의 경우 평균 39% 낮은 단가로 사업을 수행하고 있다. 이는 가로수 관리 품질을 유지하거나 향상시킬 수 없는 한계로 판단되었으며, 가로수 관리의 적정 단가 기준이 필요함을 뜻한다. 가로수 관리 품셈을 개선하기 위해 현업에서 투입되는 비용을 검토할 필요가 있었다. 하지만 국내의 조경 분야 실적공사비에 대한 데이터의 부재로 미국 RSMeans Building Construction Cost Data(RSMeans)의 세부항목을 검토하였다. RSMeans란 1942년부터 누적된 미국의 실적기반 적산방식으로 주로 연방교통부와 각 주정부의 도로국을 중심으로 공사비를 산정하는 데이터베이스이다. RSMeans는 지속적인 신기술 도입과 노동 및 재료비용의 계속된 변경을 반영하기 위해 매해 건설제품과 방법을 찾고 수량화하며, 생산성 비율을 조정하고 있다. 본 연구에서는 국내 조경 관리 방법과 큰 차이가 없는 RSMeans의 세부항목과 현행 인건비 등을 적용하여 실적공사비를 산출하였다. 적용 결과 표준품셈은 실적공사비와 비교하면 가로수 전지의 강전정의 경우 107%로의 양호한 비율이었지만, 약전정은 59%로 과소 설계가 되어 있었다. 또한, 관목 전정은 82%, 제초는 92%, 교목 시비는 87%, 방풍벽 설치는 91% 수준으로 과소 설계되어 있었다. 살수차 관수와 약제 살포는 각각 118%와 124%의 비율로 실적공사비와 비교하면 과대 설계된 부분도 확인하였다. 과소평가된 항목들은 가로수의 특수성으로 도로 안전통제 등으로 인건비 및 장비의 투입비 상승이 주요 원인으로 판단되었다. 향후 표준품셈의 조경 유지 관리항목에 일반 조경수뿐만 아니라 가로수에 관한 항목 추가가 필요하다.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.207-216
• /
• 1997

We developed the durability estimation and design systems to minimize the volume, considering the durability, efficiency, and design requirements of worm gears. That is, we consider each kind of factors affecting on durability on the basis of AGMA Standard for the cylindrical and double-enveloping worm gears. We also estimate input power on the basis of wear and durability, bending strength and deflection of worm shaft, and we developed the durability estimation and design systems of power transmission worm gears introducing the optimal design method on the personal computer to be easily used in field. Also, we developed a method which converts the design variables obtained from the optimal design method to integer values(number of worm threads, number of worm threads, number of worm wheel teeth, etc.,) to be used in real design and production. The developed durability estimation and design method can be easily applied to the design of worm gears used as power transmission devices in machineries and is expected to be used for weight minimization of worm gear unit.

• 산업경영시스템학회지
• /
• 제21권45호
• /
• pp.201-213
• /
• 1998

We address the problem of choosing the most economic mean value for an automatic filling operation on a production line through the sampling inspection. If quality characteristic of a unit is less than inspection specification then the goods is not accepted. Otherwise, it is accepted. The lots that the numbers of non-conforming units in a sample are larger than the allowable number of non-conforming units are rejected. The non-conforming units in the rejected lots are separated by the screening inspection. The non-conforming units separated are sold in discount price. We assume that quality characteristic is larger-the-better characteristic, the distribution of quality characteristic is normal distribution, and the standard deviation of the distribution is known. This paper presents total expected profit function model considering sales revenue, inspection costs, and material costs. The manufacturing process mean value maximizing total expected profit is determined, and the results of the process target value and total expected profit is analyzed as coefficients change.

• 한국축산식품학회지
• /
• 제41권5호
• /
• pp.883-893
• /
• 2021

Clostridium difficile present in feces of food animals may contaminate their meats and act as a potential source of C. difficile infection (CDI) to humans. C. difficile resistance to antibiotics, its production of toxins and spores play major roles in the pathogenesis of CDI. This is the first study to evaluate C. difficile prevalence in retail raw animal meats, its antibiotics susceptibilities and toxigenic activities in Al-Jouf, Saudi Arabia. Totally, 240 meat samples were tested. C. difficile was identified by standard microbiological and biochemical methods. Vitek-2 compact system confirmed C. difficile isolates were 15/240 (6.3%). Toxins A/B were not detected by Xpect C. difficile toxin A/B tests. Although all isolates were susceptible to vancomycin and metronidazole, variable degrees of reduced susceptibilities to moxifloxacin, clindamycin or tetracycline antibiotics were detected by Epsilon tests. C. difficile strains with reduced susceptibility to antibiotics should be investigated. Variability between the worldwide reported C. difficile contamination levels could be due to absence of a gold standard procedure for its isolation. Establishment of a unified testing algorithm for C. difficile detection in food products is definitely essential to evaluate the inter-regional variation in its prevalence on national and international levels. Proper use of antimicrobials during animal husbandry is crucial to control the selective drug pressure on C. difficile strains associated with food animals. Investigating the protective or pathogenic potential of non-toxigenic C. difficile strains and the possibility of gene transfer from certain toxigenic/ antibiotics-resistant to non-toxigenic/antibiotics-sensitive strains, respectively, should be worthy of attention.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.114-125
• /
• 1993

In the present study the newly developed CAD/CAM system is applied to the process of the molding design, machining for mini-sized and precise processive die, and the production of press-stamped parts. When the design of a die was completed by means of CAD, wire cut NC data were generated with the aid of a design drawing in the CAD system and then inputed into the wire cut machine, and with the aid of a hole chart which had been made for this purpose, all the data were classified into the categories of CNC milling, jig boring, jig grinding, and machine center, and then developing a program of generating NC data, errors in process were reduced and programming time was shortened. The program was developed by using Autolisp language which was built-in the CAD, and realizing the intergation of designing a die, generating and processing NC data directly by a designer, designing time and machinery processing time were shorted. And the traditionally required working time for design. NC program required 6 days of work becomes 4 days of work by using the developed CAD/CAM system so that the efficiency shows 150% of the reduction working time. The prpgram of the design of the automation a progressive die mold was developed in the PC-Class Autocad system, therefore development expense could be reduced, and the integration of the CAD/CAM of the progressive die mold with the standard DB being built could be realized.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.167-181
• /
• 2008

There are lack of labour and increase in logistics costs due to rapid change in logistics environments and the demand for logistics. The reality is that over spending on logistics costs are getting worse due to lack of logistics standardization. An example will be excessive logistics costs caused by unsatisfactory use of logistics equipments in wholesale markets. The logistics efficiency is falling due to delays in using logistics equipments and standardization. Therefore, there needs standardization of logistics functions and unit of handling in each stage from packing, unloading, storage, transporting, logistics information and needs logistics standardization on equipments, machineries used for the above. Standard unified with standardization is called specification and if standardization is applied broadly in manufacturing or processing, inspection than each process in terms of production can be managed rationally and labour skills will improve and product quality will be evenly maintained and compatability of each part in terms of assembly will be maintained thus materials and labour could be saved thus results in increasing productivity and lowering production costs. Also, if it is applied in industry at state-level then there will be rationalization in consumption in circulation as in purchase of raw materials, sales of products, purchase of products by consumers and contribute in improving compatibility and fair transactions. This paper is aimed to help in first solving factors affecting the most in improving logistic efficiency among unit load system and logistic hollowization, standardizing logistics base, standardizing logistics information. The study conducted surveys on limited companies but hope that in the future the target companies can be divided further into types, industries and conduct more demonstrative analysis.