• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.881-885
• /
• 2002

This paper presents the performance and the algorithm of a 1/3-octave band spectrum control system. The system is developed to provide various spectrums in a high intensity acoustic chamber. The required spectrum, which usually comes from launch vehicle company, starts from 25Hz band and ends 10kHz band. Automatic spectrum control system is preferred since the system requires short settling time to guarantee the safety of test objects and to reduce the amount of operating gas. The developed system adapted a PCI data-acquisition/signal-generation board installed in a personal computer to implement whole control logic. The control software used three cascade digital Butterworth filters using software. The filers are designed following ANSI S1.11 standard to implement 1/3 octave band filter bank. The graphical user interface of the system guides the user to follow standard operation procedure. The averaged control spectrum showed less than 0.05 dB in every running 1/3-octave band.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.6
• /
• pp.36-41
• /
• 2010

Design, manufacture and calibration procedures of a venturi pipe flowmeter for airflow measurement in altitude engine test were discussed. Altitude engine test using venturi pipe was given as an example. The venturi was designed per the ISO standard of ISO5167, and was intented to include the entire airflow range in the test envelope of the gas turbine engine. Measurement uncertainty analysis was performed in the design procedure to investigate the effect of venturi geometry and sensor specification upon the measurement uncertainty. Manufacturing process was designed to minimize the deviation from the geometry of design. Calibration was performed to get the relationship between the discharge coefficient and the pipe Reynolds number. Then the uncertainty was assessed again using real data acquired during engine test. Through these procedures, it was possible to maintain the uncertainty of airflow measurement under 1 % for most of the operating envelope of the gas turbine engine. The discharge coefficient of the venturi pipe showed agreement with the value suggested in the ISO standard ISO5167-4 within 0.6 %.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2038-2045
• /
• 2021

The main objective of this work is to propose a reliable routine standard operation procedures (SOP) for structural health monitoring and diagnosis of nuclear power plants (NPPs). At present, NPPs have monitoring systems that can be used to obtain the quantitative health record of containment (CTMT) buildings through system identification technology. However, because the measurement signals are often interfered with by noise, the identification results may introduce erroneous conclusions if the measured data is directly adopted. Therefore, this paper recommends the SOP for signal screening and the required identification procedures to identify the dynamic characteristics of the CTMT of NPPs. In the SOP, three recommend methods are proposed including the Recursive Least Squares (RLS), the Observer Kalman Filter Identification/Eigensystem Realization Algorithm (OKID/ERA), and the Frequency Response Function (FRF). The identification results can be verified by comparing the results of different methods. Finally, a preliminary CTMT healthy record can be established based on the limited number of earthquake records. It can be served as the quantitative reference to expedite the restart procedure. If the fundamental frequency of the CTMT drops significantly after the Operating Basis Earthquake and Safe Shutdown Earthquake (OBE/SSE), it means that the restart actions suggested by the regulatory guide should be taken in place immediately.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.06a
• /
• pp.231-232
• /
• 2014

• IE interfaces
• /
• v.21 no.4
• /
• pp.378-384
• /
• 2008

Small sized companies have not been successful in systematically applying statistical process control because of insufficient human resources. In this paper we present a case study of automatic checking system for a small sized company which produces various types of gears. A systematic way of automatically measuring gears is proposed and statistical analysis methods are presented. To reduce variation in the measurement data, a standard operating procedure is also proposed. This case study can be helpful to quality assurance practitioners of small sized companies who are willing to develop checking or inspection systems for their products.

• The Journal of Society for e-Business Studies
• /
• v.8 no.1
• /
• pp.141-154
• /
• 2003

SOAP is a protocol used for information exchange in distributed computing environment and SOAP defines mechanisms for message transferring between distributed system and remote procedure call/response process. This SOAP is able to be used independently on hardware platforms and operating systems and program languages because it uses only a text-based XML for protocol. Therefore ebXML that is a standard for E-Commerce adopts SOAP for message exchange. In this paper, we implement XML Hub System using SOAP and apply on the system e-Procurement. By this XML Hub System we can more easily exchange messages for B2B. Accordingly we can manage and integrate a lots of business partners.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.211-218
• /
• 1998

A variable flow-controlled boom sprayer was developed and evaluated. Field tests were conducted to evaluate the adoptability of the sprayerr with optimal conditions. Negative response time was obtained from the field test because pump and PTO were interlocked with the speed of sprayer. Another reason for the negative value was due to the definition of the response time. With constant on-time control, the system was unstable at the conditions of small tolerance and long control interval. The performances of the spray system were stable and accurate. The stable and synchronous responses were achieved with a variable on-time control. The flow control system with an optimal condition (1.0 sec of control interval, 2 of damping ratio, 1% of tolerance) provided the proper performance for uniform spraying. A standard operating procedure of the flow compensating boom sprayer for the ground speed variation was presented and recommended.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.56-59
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• Journal of Korean Society on Water Environment
• /
• v.22 no.6
• /
• pp.977-981
• /
• 2006

In order to improve water quality in drinking water sources, Ministry of Environment (MOE) was implemented total water pollution load management (TWPLM) in all the major river basins. From the experience of the application of TWPLM, we could find some problems relating the target watershed, standard operating procedure (SOP) of establishment and implementation plan, water quality and flow rate, design flow, water quality model, margin of safety (MOS), and estimation of wasteload were found. The authors were reviewed ongoing TWPLM and presented the improvement schemes for a successful TWPLM. For the application of these suggestions, further detailed studies should be done to implement TWPLM in the future.

• Journal of Korea Multimedia Society
• /
• v.6 no.6
• /
• pp.1071-1078
• /
• 2003

SOAP is a protocol used for information exchange in distributed computing environment and SOAP defines mechanisms for message transferring between distributed system and remote procedure call/response process. This SOAP is able to be used independently on operating systems and program languages because it uses only a text-based XML for protocol. Therefor ebXML that is a standard for E-Commerce adopts SOAP for message exchange. In this paper, we developed Message Broker System based on SOAP. By this Message Broker System we can more easily exchange messages for B2B. Accordingly we can manage and integrate a lots of business partners.