• Journal of the Korean Society of Visualization
• /
• v.14 no.3
• /
• pp.46-50
• /
• 2016

The objective of the present study is to perform experiments for water filled cavity heated and cooled from the side at $Ra=8.5{\times}108$. This experiment can provide validation database of the standard k-${\varepsilon}$ turbulence model for single-phase turbulent natural convection which has been regarded as one of the important phenomena in nuclear safety. For the natural convection inside a cavity, temperature and velocity were obtained by thermometry and PIV (Particle Image Velocimetry) methods. These results would be used for validation of standard k-${\varepsilon}$ turbulence model.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.19 no.4
• /
• pp.229-235
• /
• 2016

Purpose: To study whether breastfeeding and breastfeeding status during gluten introduction influences the age at diagnosis of celiac disease (CD). In addition to study, whether the timing of gluten introduction influences the age at diagnosis of CD. Methods: It was a hospital based observational study. Total 198 patients diagnosed with CD as per modified European Society of Pediatric Gastroenterology, Hepatology and Nutrition (2012) criteria, aged between 6 months to 6 years were included. Detail history taken with special emphasis on breastfeeding and age of gluten introduction. Standard statistical methods used to analyze the data. Results: $Mean{\pm}standard$ deviation age of onset and diagnosis of CD in breastfed cases was $2.81{\pm}1.42$ years and $3.68{\pm}1.55$ years respectively as compared to $1.84{\pm}1.36$ years and $2.70{\pm}1.65$ years respectively in not breastfed cases (p<0.05). Those who had continued breastfeeding during gluten introduction and of longer duration had significantly delayed onset of disease. The age at onset of CD was under one year in 40.42% of the cases, who had started gluten before 6 months of age compared to only 12.58% of those who had started gluten later (p<0.001). The proposed statistical model showed that two variables, i.e., breast feeding status during gluten introduction and age at gluten introduction positively influencing the age at diagnosis of CD. Conclusion: Delayed gluten introduction to infant's diet along with continuing breastfeeding, delays symptomatic CD. However, it is not clear from our study that these infant feeding practices provide permanent protection against the disease or merely delays the symptoms.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.1
• /
• pp.139-149
• /
• 2024

In this paper, we propose the standard architecture for the IFF interface SW in naval combat management system(CMS). The proposed standard interface architecture is a method designed to reduce modification efforts and man-month of reliability test for the existing the IFF interface SW of 11 types. We identified highly dependent CMS and GFE information, leading to the redefinition of standard requirements and functions, and proceeded with the initial design applying the Naval Shield Component Platform(NSCP). Subsequently, using the Feature Model, we derived additional common and variable elements for the interface of multiple CMS and GFE. Considering the S.O.L.I.D principles, we designed the final architecture. The proposed IFF Interface SW, based on the standard architecture, is expected to enhance management efficiency through a common architecture, increase code reusability and scalability, and reduce development costs by shortening reliability testing times.

• Proceedings of the KSPS conference
• /
• 2005.04a
• /
• pp.3-7
• /
• 2005

This research is for finding prototypes and characteristics of intonation found in ${\ulcorner}$-a/e, $t{\int}ijo$<${\lrcorner}$ and ${\ulcorner}$p/simnida${\lrcorner}$ among modern Korean predicate statements by constructing spoken corpus based on the current radio broadcast. So the result of the study is as follows. : (1) The construction of the balanced spoken corpus and the standard for boundary determination of rhythm are needed for the intonation model of speech synthesis. (2) Korean intonation units have the splited word tone which includes the nuclear tone and the pre-nuclear tone makes unclear tone more detailed. (3) I made man and woman intonation models individually through t-test of SPSS. (4) The standard intonation model is devided '-ajo'type and '-nida'type

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.21-27
• /
• 2003

In these paper, we define object models in order to represent a correct analysis model, propose translation method to formal specification necessary to uniform and standard. The translated model provide to correctness, consistency and completeness. If it is happen to error in the VDM specification, we can verify model to adapt initial object model step. It increase correctness to retrieval, reduce the costs and efforts of after development because of the verified model used to basic specification in design step.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.7
• /
• pp.548-556
• /
• 1991

In this paper, Korean spoken continuous digits are ercognized using DHMM(Dynamic Hidden Markov Model) and lexical analysis to provide the base of developing voice dialing system. After segmentation by phoneme unit, it is recognized. This system can be divided into the segmentation section, the design of standard speech section, the recognition section, and the lexical analysis section. In the segmentation section, it is segmented using the ZCR, O order LPC cepstrum, and Ai, parameter of voice speech dectaction, which is changed according to time. In the standard speech design section, 19 phonemes or syllables are trained by DHMM and designed as a standard speech. In the recognition section, phomeme stream are recognized by the Viterbi algorithm.In the lexical decoder section, finally recognized continuous digits are outputed. This experiment shiwed the recognition rate of 85.1% using data spoken 7 times of 21 classes of 7 continuous digits which are combinated all of the occurence, spoken by 10 man.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.753-768
• /
• 1995

For accurate impression taking of dental patient and esthetic denture treatment of ednetulous patient, measuring between intraoral anatomic landmarks is useful.In this study the subjects selected at a random were two-jundred forty persons with a mean age 22.5(range 21-24) and were taken impression of by irreversible hydrocolloid impression material(Alginate). On the study model made by dental stone, each individual tray was made and final impresion was taken by border moilding. On final model measurings were performed with 3-dimensional measuring device and the values were analyzed by t-test The results is following : ABOUT THE MEASURED VALUES. 1. The width between maxillary right and left canine cusp tip was average 36.44mm(s.d. 2.48), man 36.67mm, woman 35.83mm(p<0.05). 2. The width between labial height of contour of maxillary right and left canine was average 40.08mm(s.d. 2.42), man 40.29mm, woman 39.52mm(p<0.05). 3. The width between mesio-lingual cusps of maxillary first molar was average 43.14mm(s.d. 3.33), man 43.56mm, woman 42.05mm(p<0.05). 4. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary first molar was average 64.89mm(s.d. 3.88), man 65.58mm, woman 62.92mm(p<0.05). 5. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary second molar was average 68.58mm(s.d. 3.91), man 69.29mm, woman 66.30mm (p<0.05). 6. The width between right and left hamular notch was average 49.80mm(s.d. 3.96), man 50.70mm, woman 48.20mm(p<0.05). 7. The length from labial heigth of contour of maxillary central incisor to center of incisive papilla was average 9.52mm(s.d. 1.18), man 9.46mm, woman 9.63mm(p>0.05). 8. The length from labial heigth of contour of maxillary central incisor to palatine fovea was average 53.27mm(s.d. 2.93), man 53.93mm, woman 52.08mm(p<0.05). 9. The center of incisive papilla ws located posterior to intercanine line at 0.40mm(s.d. 1.16), man 0.51mm, woman 0.11mm(p<0.05). 10. The height from incisal edge of maxillary central incisor to the labial vestibule was average 21.84mm(s.d. 1.38), man 22.01mm, woman 21.00mm(p<0.05). 11. The height from mesiolingual cusp of maxillary first molar to buccalvestible was average 17.45mm(s.d. 1.42), man 17.56mm, woman 17.08mm(p>0.05). 12. The height from hamular notch to standard occlusal plane was average 6.84mm(s.d. 1.06), man 6.91mm, woman 6.70mm(p>0.05). 13. The height from the deepest point of palatal vault to standard occlsalplane was average 19.95 mm(s.d. 2.03), man 20.19mm, woman 19.12mm(p<0.05). ABOUT THE ARCH FORM 1. The arch form was able to classify into four typr by the rate of the measured values. Each arch form distribution was that the 1 group had 32.46% the 2 group 2.19%, the 3 group 52.83%, the 4 group 12.72%. The sexual composition was that in 1 group man had 73.5%, woman 26.5%, in 2 group man had 40.0%, woman 60.0%, in 3 group man had 83.3%, woman 16.7%, and in 4 group man had 55.17%, woman 44.83%. 2. When canine cusp tip was marked as point O, the intersection point between labial height of contour of maxillary central incisor and intermaxillary suture as point A, height of contour of maxillary second molar buccal alveolar ridge as B point, ${\angle}$AOB was measured $133.8^{\circ}$for the 1 group, $133.0^{\circ}$for the 2 group, $132.3^{\circ}$for the 3 group, $128.9^{\circ}$for the 4 group.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.65-69
• /
• 2004

In the present work, characteristics of an axial flow fan haying distorted inlet flow produced by hub cap are investigated. The distorted inlet flow is generated by the shape of hub cap installed in front of the axial flow fan. Two different cases of hub cap geometry are analyzed to verify the influence of flow distortion. The flow fields are analyzed numerically by solving steady form of three-dimensional Reynolds-averaged Wavier-Stokes equation and standard k-$\epsilon$ model is used for a turbulence closure. The results obtained from the numerical simulation are compared to those from experimental measurements. It is found that the overall performance of the axial flow fan is increased by reducing the flow distortion at the hub. Detailed characteristics of the flow fields of two different geometric conditions are also discussed.

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.139-148
• /
• 1999

In oder to analyze the effect of operating conditions on pulverized coal combustion, a numerical study is conducted at the pulverized coal combustor. Eulerian approach is used for the gas phase, whereas Lagrangian approach is used for the particle phase. Turbulence is modeled using standard ${\kappa}-{\varepsilon}$ model. The description of species transport and combustion chemistry is based on the mixture fraction/probability density function(PDF) approach. Radiation is modeled using P-l model. The turbulent dispersion of particles is modeled using discrete random walk model. Swirl number of secondary air affects the flame front, particle residence time and carbon conversion. Primary/Secondary air mass ratio also affects the flame front but little affects the carbon conversion and particle residence time. Air-fuel ratio only affects the flame front due to lack of oxygen. Radiation strongly affects the flame front and gas temperature distribution because pulverized coal flame of high temperature is considered.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.18-19
• /
• 2006

The recent interest in distributed generation (DG) due to the opening of the electricity market and the need for alternatives to conventional fossil fuel-based electricity generation has created renewed interest in grid-connected photovoltaic(PV) systems. Many studies are being performed at the power system level to examine the impacts of grid-connected PV systems and several models for PV arrays have been proposed in the literature. However, the complexity of these models and difficulties of implementing them in various software programs can be deterrents to their use. This paper proposes a robust and flexible PV device model suitable for dynamic and transient studies where the PV array's non-linear DC characteristics are important. The model's implementation in software is straightforward and it can even be constructed using standard software library components, as demonstrated using PSCAD/EMTDC.