• 한국조명전기설비학회지:조명전기설비
• /
• 제4권1호
• /
• pp.54-62
• /
• 1990

본 연구는 우리나라 전력다소비 건물의 전기설비용량, 전력사용실태를 조사하여 통계적 처리를 함으로써 합리적인 수요율과 부등율 기준을 설정하였다. 설정된 수요율과 부등율 기준을 적용하면 설비투자비 감소, 전력손실 감소, 전기요금 절약 및 설비 이용율 개선에 크게 기여할 수 있다. 그러므로 설정된 수요율과 부등율 기준은 이행 관제규정을 개정하기 위하여 활용되어야 할 것이다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.103-112
• /
• 1998

The earthquake resistant design for roadway bridges introduced in 1992 is conducted according to the "Standard Specification for Roadway Bridges", Division V, Seismic Design and the first revision of the Standard was done in 1996. However, dur to different concepts of the earthquake resistant design from those of the other designs, the provisions given in the Standard are still not applied appropriately. In this paper the verification of the earthquake resistant capacity of a bridge with typical configurations, 5-span steel box girder bridge, is carried out based on the application rules of the present Standard in order to provide clear understandings about the earthquake resistant verification and the earthquake resistant design as well.n as well.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권11호
• /
• pp.577-581
• /
• 2006

This paper deals with an automatic rotor design functional standard computation based on torque/volume for a synchronous reluctance motor(SynRM). The focus of this paper is the design relative to the torque/volume on the basis of each rated watt according to the rotor diameters of a SynRM. The coupled finite elements analysis (FEA) & sequential unconstrained minimization technique (SUMT) have been used to evaluate design solutions. The proposed procedure allows to define the rotor geometric design function according to the rotor diameter and rated watt starting from an existing motor or a preliminary design.

• 한국소음진동공학회논문집
• /
• 제20권12호
• /
• pp.1229-1235
• /
• 2010

Anti-terrorism design for public buildings as well as military facilities is important to minimize the mass casualties from terrorist attacks. Also, well designed glazing and window systems can reduce the potential injury of human caused by scattering fragment of a glazing. In this paper, blast resistant design for glazing and window systems is investigated based on the U.S. Standard. The design procedures include minimum requirements for the design, standard practice for design evaluation of the glazing and standard test method for evaluation of the performance.

• 한국산업융합학회 논문집
• /
• 제26권2_1호
• /
• pp.239-248
• /
• 2023

In this paper, we conduct a study on the design that can secure the safety of the EPLA system by performing safety activities based on the ISO 26262 standard for vehicle functional safety. In the case of a company developing a detailed system, it is responsible for verification through hardware design and safety analysis in the overall flow of safety activities, and safety analysis according to the ASIL safety level must be properly performed. At this time, there are cases where the safety goal quantitative metric value suggested by the ISO 26262 standard cannot be satisfied only by the hardware design of the basic function, so it is necessary to design and install the safety mechanism. Based on ISO 26262 safety activities, it is possible to derive an effective design plan through hardware safety analysis.

• 대한건축학회논문집:계획계
• /
• 제34권6호
• /
• pp.77-84
• /
• 2018

China has been pursuing continuous education reforms in order to complement the shortcomings of traditional education and to prepare for a new era in accordance with the development of the economy and society. School facilities were rapidly increased due to rapid population growth in the 60s and 70s, but the quality of the school facilities was low considering the efficiency and economy, and the regional variation was serious. The National Standard for School Design was enacted in 1986. Since then, we have proposed a new national standard in 2011 in accordance with social change and educational needs, and it has reached the present time. The purpose of this study is to analyze the main contents of "Code for design of school(GB50099-2011)" which is a standard study for Chinese school design as a basic study to understand changes in school architecture in China.

• 대한인간공학회지
• /
• 제32권3호
• /
• pp.279-291
• /
• 2013

Objective: The aim of this study was to compare old standard EN 954-1 and new standard EN ISO 13849-1 through case study and provide necessity of adaptation of EN ISO 13849-1 in Korea. Background: International and EU harmonized standard EN ISO 13849 "safety of machinery - Safety-related parts of control system" is classified into Part 1: General principles for design and Part 2: Validation. EN ISO 13849-1 standard was introduced in Official Journal of the European Union on September 8, 2009 as harmonized standard, and old standard EN 954-1 was withdrawn on December 31, 2011. So, EU decided to use of EN ISO 13849-1 standard forcibly from January 1, 2012 for safety of machinery. New machines need to be CE marked if they are to be placed on the market in the European Economic Area(EEA), Switzerland or Turkey, and Korean machine builder should apply EN ISO 3849-1 standard for safety of machinery accordingly. However, current Korean Safety Certification system(KCs mark) for dangerous machinery is not referred to EN ISO 13849-1 standard as safety standard. There is a need of research for adaptation of EN ISO 13849-1 standard in Korea as safety standards for new design of safety-related control system which use mostly electronic components. Method: Five case studies of representative designs for safety-related control system in accordance with EN 954-1were selected according to safety category from B to 4. And these five representative designs were tried to change new design in accordance with EN ISO 13849-1 standard. The results of comparison were analyzed in aspect of economy and technical complexity. Results: The results showed that EN ISO 13849-1 provided quantitative method of application and it enabled designers to create safety-related control systems that require fewer components and less wiring, with many of the components being to a lower specification and, therefore, less costly. Conclusion: EN ISO 13849-1 standard is good for electronic safety-related control systems compare to EN 954-1. By considering the importance of application of EN ISO 13849-1 and benefits, the application of EN ISO 13849-1 as safety standard for safety of machinery is urgent in Korea. Application: The results of comparing EN 954-1 and EN ISO 13849-1 standard might help to determine the adaptation of EN ISO 13849-1 standard for safety of industrial machinery in Korea.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.7-23
• /
• 2016

Plant engineering industry is considered as a key industry which will drive the future of Korea. However, Korean plant engineering companies have recently made huge losses in overseas businesses and the lack of engineering capability is pointed out as a main cause of this situation. Unlike Korean plant engineering companies, world leading engineering companies such as Flour and Bechtel have their own systems Engineering Standards/Guides ensuring successful fulfillments of the concept and basic design processes. An engineering standard for an organization is an essential means to shorten the time for engineering design, to maintain the engineering quality and to secure the engineering efficiency in the development of the complex system. Korean plant engineering companies'lack of engineering capability comes from the absence of the engineering standard. In the paper, we have developed a steel-making plant engineering standard based on a systems engineering standard. We chose both ISO/IEC/IEEE 15288 and NASA SE Handbook as main reference standards. First, we have introduced a life-cycle definition and a physical hierarchy of a general steel-making plant. Then we have introduced detailed engineering processes of each life-cycle stage. The full scope of the study was from the feasibility study to the basic design but in the paper, we have only introduced detailed engineering processes and exit criteria for the feasibility study and the concept design.

• 한국CDE학회논문집
• /
• 제9권1호
• /
• pp.19-26
• /
• 2004

It is not possible to exchange parametric information of CAD models based on the current version of STEP (Standard for the Exchange of Product model data). The designer intents are lost during the transfer of CAD models. To resolve this problem, the macro-parametric approach had been proposed. To enable this approach, a set of standard modeling commands has been defined. Errors or missing elements of the standard modeling commands can be discovered by implementing macro-parametric translators. But there is a limit to discover problems only by using translators. This paper proposes a method to verify the standard modeling commands by implementing a geometric modeler. First, each argument of a modeling command is verified. Second, the set of the standard modeling commands is applied to geometric modeling of commercially available product parts. For the geometric modeling, nine test models have been selected.

• 한국CDE학회논문집
• /
• 제20권2호
• /
• pp.114-123
• /
• 2015

The BIM libraries and technical contents in order to develop common technical standards that reflect the contents for a BIM design support should be based. It is essential to redress the technological burden on design office requirements. The technical contents consisted of Material Information, Standard Details and Cost Information are made by system of standard classification. By connecting BIM libraries with each of information including the contents, it derives the consistent BIM data application through the integrated model. In addition, we look forward to introducing and applying BIM more easily through securing common technical contents which remove the pressure of engineering developments of each individual architectural design office and prevent overlapping investments.