• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.466-469
• /
• 2006

S-57 is currently the IHO standard for the exchange of digital hydrographic data. S-57 is intended to support all types of hydrographic data. But, it has been used almost exclusively for encoding Electronic Navigational Charts(ENCs). In onder to meet this requirement, a new standard is being developed. GML will be the core encoding rule of IHO's new standard. but there has been no study that tried to develop the GML for ENC that are reconized as base map in the Marine GIS. If ENC is transformed into the form of GML, it may be widely used for more users and applications. This paper presents the application schema for translating ENC into GML and program.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.483-488
• /
• 2019

The propagation prediction model of the earth-space communication link used as an international standard was used to calculate and analyze the total losses on the communication path. The standard definition and scope of ITU-R Rec. were analyzed for each parameter(rain, scintillation, atmospheric gas, clouds) used to calculate the total loss. The total losses were calculated using the standard model for each parameter and the statistical data provided by ITU-R, and the results were analyzed using the validation examples data. The rain losses were calculated using long-term local rainfall attenuation statistics data measured in the region, and compared with the calculation results using a rainfall map in the ITU-R Recommendation. The data of Cheollian satellites for the L-Band and Ka-Band were used to calculate the rainfall attenuation. In the range of 0.01% to 0.1%, it was found to have a greater attenuation slope when using local data than attenuation by the model of ITU-R.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.393-401
• /
• 2022

Objectives: OHSMS, which was introduced by Serious Accident Punishment Act as a means for safety and health management at work place, but it is not effective according to recent statistical data. Therefore, I intend to compare the OHSMS regulations of SAPA based on ISO 45001, the international standard of OHSMS, and examine the differences and problems. Methods: The OHSMS regulation of Serious Accident Punishment Act was compared and analyzed using the content standard of ISO 45001, the international standard of OHSMS. The construction and operation aspects and differences in key concept definitions of OHSMS were analyzed in depth. Results: ISO 45001 aims to provide OHSMS with an autonomous framework to manage risks and opportunities in safety and health management, whereas Serious Accident Punishment Act aims for safety and health management through an interest and effort in safety and health management on the premise of legal responsibilities of corporations and CEO. As a result, comparing to ISO 45001 in construction and operation aspects and differences in key concept definitions of OHSMS, the OHSMS of Serious Accident Punishment Act do not cover the entire business in concept definition and construction. Conclusions: In order for Serious Accident Punishment Act to achieve its original purpose of preventing serious accidents through systemic safety and health management, it is necessary to correctly understand the contents of ISO 45001 and to revise the OHSMS regulations in a direction that can ensure predictability and feasibility.

• Korean Journal of Artificial Intelligence
• /
• v.7 no.1
• /
• pp.23-59
• /
• 2019

The purpose of this study is to develop a measure of service quality in the traditional market by examining previous research on the service quality of the traditional market studied so far. After defining basic concepts through definition of traditional market and existing studies, 5 categories of configuration items for SERVQUAL measurement in traditional market were made up based on existing researches related to definition of service quality and service quality of traditional market. A survey was conducted on the items that fit the intention of this study and various statistical analyzes were conducted. Statistical analysis was performed using SPSS 22.0 and AMOS 22.0. The reliability of the items was measured by the reliability test, and the predictability and accuracy of the items were examined. The validity of the measured variables was verified through confirmatory factor analysis. Reliability, empathy, responsiveness, certainty, and tangibility were the most important factors in this study. Responsiveness factors include communication, time reduction, real time, promptness. Assurance factors include the assurance of delivery, prompt answers, product knowledge items. Tangibility factors include, convenient device systems, location information, presence as a fact, and as a result, the latest modern items are adopted. The quality of service in the traditional market developed in this study was found to be good in reliability and validity test. Confirmatory factor analysis result using structural equation model also met the conformity index standard. If service satisfaction is measured based on this research, basic data can be presented to policy makers who implement policies on traditional markets to make the right decisions. In addition, it will be able to provide traditional market operators with operational strategy and marketing data. In the future, based on the traditional market service quality scale developed in this study, it is necessary to grasp the factors to be continuously managed to improve the service quality of the traditional market, user satisfaction, and intention to use.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.2
• /
• pp.77-85
• /
• 2017

Pseudo-static approach has been conventionally applied for the design of gravity quay walls. In this method, the decision to select an appropriate seismic coefficient ($k_h$) is an important one, since $k_h$ is a key variable for computing an equivalent pseudo-static inertia force. Nonetheless, there is no unified standard for defining $k_h$. Likewise, port structure designers in Korea have a difficulty in choosing an appropriate $k_h$ definition, as there are conflicts in how $k_h$ is defined between the existing seismic code of port structures and the proposed new one. In this research, various seismic design codes for port structures were analyzed to compare the definitions of the seismic coefficient. The results were used for the proposing a unified seismic coefficient definition. Further, two dynamic centrifuge tests were performed with different wall heights (5 m, 15 m) to clarify the reference point of peak acceleration used in determination of $k_h$ according to the wall height. Results from dynamic centrifuge experiments showed that correction factors for the peak ground acceleration considering both the wall height and allowable displacement are needed to calculate $k_h$.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.4
• /
• pp.592-612
• /
• 2008

The convergence of technology as a major breakthrough in technology innovation has been generated and developed. With the advent of the 21st century characterized by the knowledge-based economy, it is happening even more frequently and vigorously than ever. However, study on classification system or definition of notions is necessary as the convergence of technology is still in the early stage. The existing classification system has limited application to the convergence of technology. With no standard available for the classification of the technology convergence, there has been much concern for duplicative R&D investment. On this ground, a new and reformed classification system for the convergence of technology and definition of notions are needed. Previous studies regard base technologies used in the technology convergence and new convergence technologies as important. However, this paper views convergence of technology as a dynamic phenomenon and puts an emphasis on the cause of technology convergence, not on the new technology itself and examines whether base technologies go back to their original state after the completion of technology convergence. This kind of approach will classify technology convergence by characteristics. Although more researches including quantitative analysis are necessary, this paper expects to offer help with further researches on classification system.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.10
• /
• pp.791-795
• /
• 2009

There is a need for a system independent human data format that doesn't depend on a specific graphics tool or program to use interoperable human data in a network environment. To achieve this, the Web3D Consortium and ISO/IEC JTC1 WG6 developed the international draft standard ISO/IEC 19774 Humanoid Animation(H-Anim). H-Anim defines the data structure for an articulated human figure, but it does not yet define the data for human motion generation. This paper discusses a method of obtaining compatibility and independence of motion data between application programs, and describes a method of simplifying motion retargetting necessary for motion definition of H-Anim characters. In addition, it describes a method of generating H-Anim character animation using arbitrary 3D character models and arbitrary motion capture data without any inter-relations, and its implementation results.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.1
• /
• pp.33-45
• /
• 2013

Systems Engineering Approach was applied to the development of operator-support core management system based on the on-site operation experience and document of core management procedures, which is for enhancing operability and safety in PHWR (Pressurized Heavy Water Reactor) operation. The dissertation and definition of the system were given on th basis of investigating and analyzing the core management procedures. Fuel management, detector calibration, safety management, core power distribution monitoring, and integrated data management were defined as main user's requirements. From the requirements, 11 upper functional requirements were extracted by considering the on-site operation experience and investigating documents of core management procedures. Detailed requirements of the system which were produced by analyzing the upper functional requirements were identified by interviewing members who have responsibility of the core management procedures, which were written in SRS (Software Requirement Specification) document by using IEEE 830 template. The system was designed on the basis of the SRS and analysis in terms of nuclear engineering, and then tested by simulation using on-site data as a example. A model of core power monitoring related to the core management was suggested and a standard process for the core management was also suggested. And extraction, analysis, and documentation of the requirements were suggested as a case in terms of systems engineering.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.95-104
• /
• 2005

The diagram has a intuition and simplicity So, it is widely used in various fields in current computing environment. But, because of the absence of a standard diagram specification method, we have difficulty in exchanging the diagram data between different diagram software and besides, we spend much money and time to code diagram component, rules and semantics to which diagram would be applied. So We propose a method for defining diagram component's shapes and actions, diagram's rules and semantics using XML. And We design and implement the diagram system which execute XML document specifying diagram. In the diagram system, We can define diagram component in WISWIG manner and generate DML document automatically. So We can develop diagram system more efficiently. And by defining diagram rules using DTD, we also achieve the consistency of DTD meaning. And We propose Semantic Definition XML for specifying diagram semantics. So, diagram sentence which drawn by users could be given semantics and executed in diagram system. In this thesis, many VPL(Visual Programming Language) concepts were adopted to implement diagram system environment.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.3
• /
• pp.121-154
• /
• 2014

This study explores standardization plans concerning industrialization of Hanjii which is traditional culture resources of rural community. Hanji is very useful in many ways, and its usefulness is not confined to only paper. In other words, it comes to have architectural uses, agricultural uses, clothing uses, and medical uses through fusion and convergence. However, the expansion of Hanji market dose not lead to profits for related stake holders because its standardization is not nurtured yet. For standardization, this paper argues, first, a industrial definition of Hanji is needed in which Hanji's own characteristics is involved. Besides maintaining traditional characteristics, the definition and quality standards of Hanji needs to be established by considering a given condition of Hanji industy. Second, a satisfactory method to measure Hanji's own material characteristics(i.g., mulberry paper content and long-term sustainability), which affects Hanji's quality, needs to be developed and standardized. Third, a government standard is urgently needed in order to keep consumers from being confused when they select Hanji products. The standardization of Hanji products and technology needs to be established in both case of current Hanji market and newly developed products and technology.