• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.70-70
• /
• 2003

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.351-353
• /
• 2002

Up to now the design standard of tower for overhead transmission line in KEPCO was revised four times since 1970. During last year. we had reviewed this design standard. This paper shows the design standard of tower for overhead transmission line in KEPCO. In this standard, a kind of tower was defined as standard tower and special tower. Also we had defined usage range of standard tower, tower height, arrangement of power line, design condition of tower arm and etc. On the wind pressure, we had defined basic velocity pressure per region and maximum wind pressure. For special region, design wind pressure will be considered the receded wind velocity of meteorological observatory and regional condition by this standard.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.2
• /
• pp.214-219
• /
• 2008

An experiment was conducted to evaluate the effects of nitrogen (N) level on the dry matter (DM) yield, N concentration and oxalate content of some tropical grasses, namely Rhodesgrass (Chloris gayana), Guineagrass (Panicum maximum) and Sudangrass (Sorghum vulgare). Three levels of N as urea were applied (Standard- 260, $Standard{\times}2$- 540 and$Standard{\times}4$- 1,060 kg N/ha for Rhodesgrass; Standard- 380, $Standard{\times}2$- 770 and $Standard{\times}4$- 1,570 kg N/ha for Guineagrass and Sudangrass) in a completely randomized design and grasses were harvested twice at approximately two-month intervals. Dry matter yield tended to be higher with increased rate of N fertilizer in all species, while further additional N ($Standard{\times}2$ or $Standard{\times}4$) did not significantly (p>0.05) further increase DM yield, when compared with the Standard level of N fertilizer application. There was also a trend towards higher N concentration in plants as N fertilization increased in all species and it was increased significantly in Rhodesgrass and Sudangrass (p<0.05 or p<0.01, respectively). Further additional N ($Standard{\times}2$ or $Standard{\times}4$) application showed no significant (p>0.05) differences on oxalate content in plant tissue within species, when compared with the Standard level of N. The Rhodesgrass contained 0.11, 0.13 and 0.15% soluble oxalate and 0.23, 0.25 and 0.27% total oxalate with Standard, $Standard{\times}2$ and $Standard{\times}4$ level of N application, respectively. The Guineagrass contained 0.54, 0.50 and 0.42% soluble oxalate and 1.60, 1.56 and 1.45% total oxalate with Standard, $Standard{\times}2$ and $Standard{\times}4$ level of N application, respectively. The Sudangrass contained 0.06, 0.15 and 0.12% soluble oxalate and 0.22, 0.22 and 0.21% total oxalate with Standard, $Standard{\times}2$ and $Standard{\times}4$ level of N application, respectively The results from this study suggest that these grasses do not use further addition of N fertilizer ($Standard{\times}2$ or $Standard{\times}4$) to form high content of oxalate salts, when compared with the Standard level of N. In addition, the levels of oxalate present with these grasses are quite low as far as toxicity to animals is concerned.

• KIEAE Journal
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2014

In the previous test, the verification of the standard floor impact source was carried out comparing the physical characteristics with living impact sources. The result was appeared the validation of the standard impact source was very low because of differences of physical characteristics. This study aims to evaluate annoyance and loudness of standard impact source which is used for the measurement of floor impact sound, and to compare the annoyance and loudness of living impact sources which are produced in real life. The impact sources considered are tapping machine, tire and impact ball as standard sources, and nine real sources which were chosen from the existing researches. The result showed differences of annoyance and loudness between standard impact sources and living impact sources, which means the standard impact sources may rate the performance of floor system inappropriately. In the future, the rating method should be examined how the standard impact sources are similar with real sources in the point of rating the performance of floor system.

• Journal of Preventive Medicine and Public Health
• /
• v.37 no.1
• /
• pp.17-25
• /
• 2004

Objectives : We intended to evaluate the double standard status and to identify factors of determining double standard criteria in multinational corporations of Korea, and specifically those in the occupational health and safety area. Methods : A postal questionnaire had been sent, between August 2002 and September 2002, to multinational corporations in Korea. A double standard company was defined as those who answered in more than one item as adopting a different standard among the five items regarding double standard identification. By comparing double standard companies with equivalent standard companies, determinants for double standards were then identified using logistic regression analysis. Results : Of multinational corporations, 45.1% had adopted a double standard. Based on the question naire's scale level, the factor of 'characteristic and size of multinational corporation' was found to have the most potent impact on increasing double standard risk. On the variable level, factors of 'number of affiliated companies' and 'existence of an auditing system with the parent company' showed a strong negative impact on double standard risk. Conclusion : Our study suggests that a distinctive approach is needed to manage the occupational safety and health for multinational corporations. This approach should be focused on the specific level of a corporation, not on a country level.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.527-528
• /
• 2006

A dissipation factor standard of decade type having the range of 1 to 0.0001 at the frequency of 1 kHz and 10 kHz was fabricated using "T" networks combined R and C components. The values of the fabricated dissipation factor standard were adjusted within 1% of the nominal values at 0.0001 dial range and 0.05% at the others. This dissipation factor standard is used as a working standard for calibration of a impedance measurement meter at KRISS and as a primary standard of dissipation factor field at NML-SIRIM in Malaysia.

• Korean Journal of Acupuncture
• /
• v.27 no.2
• /
• pp.1-11
• /
• 2010

Objectives : The aim of the study is to explain the general guidelines of the WHO standard acupuncture point locations (APLs). Understanding the general guidelines will enable experts to make the clear use of the standard APL for education, research and practice. Methods : In the beginning of development of the standard APL, experts made general guidelines to draw mutual agreements of the three nations (Korea, China, and Japan) on the standard APL. The guidelines include point locating methods, syntax of descriptive sentences, landmarks on body surface, reference acupuncture points, usage of anatomical terminology, and proportional bone measurements. Results : We found that there are some considerable problems in practical use of the APLs due to the strict application of anatomical terms, even on accessory phrases such as region of body in the sentence of each description. Conclusions : We hope that the study helps readers expand the understanding of the newly developed standard APLs resulting from increased application of acupuncture points. Also, it would be a reference to revise the WHO standard APLs in the future.

• Journal of Korea Port Economic Association
• /
• v.22 no.1
• /
• pp.1-15
• /
• 2006

This paper analyzes how levels of logistics standardization are related to logistics costs. The study surveyed ratios of standard pallet use in order to measure levels of firms' standardization in logistics management. Research focused on how firms' logistics costs were related to their levels of logistics standardization and ratios of standard pallet use. After measuring use of standard pallets and logistics costs, optimal levels of logistics standardization were estimated based on survey data. Logistics costs and standardization were more related to labor than to freight volume or export. Results indicated that firms could reduce logistics costs by raising levels of logistics standardization; optimal levels of standard pallet use out of Korean firms' total manufacturing cargo volume were estimated at 44.26% for multi-standard pallets and 57.99% for a single standard pallet (a unit load system). The study demonstrated that adopting a single standard pallet results in better cost saving logistics systems than use of multi-standard pallet types. These results may explain why firms pursue standardization in logistics systems.

• Plant Journal
• /
• v.8 no.2
• /
• pp.70-81
• /
• 2012

The study aims to supplement facility management plan and safety regulations & standard of oil pipeline by searching and reviewing related regulation & standard inside and outside of the country. Korean regulation & standard is reviewed based on harbor and fishery design standard of the ministry of maritime affairs and fisheries, general technology standard of oil pipeline safety regulation, gas excavation construction and safety maintenance indicator of Korea gas corporation. Global regulation & standard is reviewed based on U.S standard inspection for offshore pipeline and Europe/Mexico standard inspection for offshore pipeline. The contents of offshore pipeline installation is inserted into pipeline sector for objected facilities of safety inspection regulation & standard and, the standard of safety inspection for offshore pipeline is newly presented into pipeline maintenance part of the planning facilities management with its inspection period and method.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.3
• /
• pp.127-135
• /
• 2002

Shore hardness test was developed in 1906 to overcome the limit of Brinell hardness test. However, the detailed requirements on the tester was not clearly specified except the scale, i.e., 100 HS for high carbon steel and 10 HS for soft brass. As a result, the shore hardness was used for quite long time without well established standards. For the establishment of hardness standards, standard tester, standard procedure, and standard hardness block must be provided. So far the standard of Shore hardness was maintained by correlating Shore hardness scale to Vickers hardness through converting equation. This is the so called converted Shore hardness and it is not the true Shore hardness standard strictly. In this paper, the possibility of establishing Shore hardness standard based on the Shore standard hardness tester is reported.