• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.65-72
• /
• 2019

This study was aimed at investigating the levels of the natural preservatives of benzoic, sorbic and propionic acids in cereal grains, nuts and seeds. Benzoic and sorbic acid were analyzed by high-performance liquid chromatography with a diode-array detector (HPLC-DAD) and further confirmed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), whereas propionic acid was analyzed using a gas chromatography-flame ionization detector (GC-FID) and further confirmed by gas chromatography-mass spectrometry (GC-MS). Benzoic, sorbic and propionic acids were found in 44, 22, and 550 samples out of 702 samples, respectively. From the total of 702 samples. The concentrations of benzoic, sorbic and propionic acid were ranged from not detected (ND) to 23.74 mg/L, from ND to 7.90 mg/L, and from ND to 37.39 mg/L in cereal grains, nuts and seeds, respectively. The concentration ranges determined in this study could be used as standard criteria in the process of inspecting cereal grains, nuts and seeds for preservatives as well as to address consumer complaints or trade disputes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.297-303
• /
• 2018

With the changing trend of the building construction to high rising and large scaling, the underground structure has been increased, and its usage also increased and variety. Hence, to protect the underground structure against underground water, various water proofing methods has been developed. Among the many water proofing methods, the combined water proofing method using both asphalt seal and sheet has been widely used to secure the sufficient performance and decrease the construction failure. However, during the summer period of extremely high temperature conditions, the asphalt sealing materials were separated and leaked into the structure. Therefore, the aim of the research is to provide the quality standard of asphalt sealing material based on the various temperature changes depending on seasons. According to the experimental results, the temperature of the sealing materials applied on the slab was increased up to $54^{\circ}C$ which was $3^{\circ}C$ higher than the structure temperature of $51^{\circ}C$. Based on the melting test for asphalt sealing materials applied on the outside wall of the structure, in the case of water-dispersing typed materials showed significant melting down due to its slow evaporation and low viscosity. Furthermore, from the accelerated test conducted indoor conditions, a solvent-type and water-dispersing typed materials showed significant melting down due to their low viscosity and melting point in ambient conditions. Based on these results, viscosity and melting point are found as the important factors on asphalt sealing materials' quality, and it is necessary to designate the quantitative level of the viscosity and melting point for quality control.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.217-225
• /
• 2019

The purpose of this study was to quantitate signal to noise ratio and contrast to noise ratio of the portal vein using CT and 3.0T MRI and to investigate the optimal imaging device. Twenty patients who inspective CT and 3.0T MRI between February 2018 and April 2018 were randomly assigned to receive data from the picture archiving communication system. The SNR and CNR values were evaluated by measuring the mean and standard deviation of the region of interest of the four regions of the portal vein (the main portal vein, the right vein, the left vein, and the middle vein). The results showed that SNR was 9.180.72 in the right context, 9.410.84 in the left context, 9.540.59 in the middle context, 9.550.75 in the order context, and 22.292.03 in the right context and 25.893 in the 3.0T MRI. 19, median context: 24.392.87, and order Mac: 26.642.30 (p<0.05). CNR was 3.790.68 in the CT context, 3.740.65 in the left context, 3.710.39 in the middle context, 3.790.68 in the order context, 9.490.65 in the right context, and 11.0001.90 in the 3.0T MRI, Intermediate context: 12.701.75, order Mac: 10.010.98, 3.0T MRI was higher than CT (p<0.05). In conclusion, SNR and CNR values were higher in the 3.0T MRI than CT in the 4 portal regions. Therefore, 3.0T MRI using non-ionizing radiation was the most superior imaging equipment than CT.

• The Korean Journal of Archival Studies
• /
• no.18
• /
• pp.139-178
• /
• 2008

The functional requirements standards for electronic records management systems which have been published recently describe the specifications very precisely including not only core functions of records management but also the function of system management and optional modules. The fact that these functional requirements standards seem to be similar to each other in terms of the content of functions described in the standards is linked to the global standardization trends in the practical area of electronic records. In addition, these functional requirements standards which have been built upon with collaboration of archivists from many national archives, IT specialists, consultants and records management applications vendors result in not only obtaining high quality but also establishing the condition that the standards could be the certificate criteria easily. Though there might be a lot of different ways and approaches to benchmark the functional requirements standards developed from advanced electronic records management practice, this paper is showing the possibility and meaningful business cases of gaining useful practical ideas learned from imaging electronic records management practices related to the functional requirements standards. The business cases are explored central functions of records management and the intellectual control of the records such as classification scheme or disposal schedules. The first example is related to the classification scheme. Should the records classification be fixed at same number of level? Should a record item be filed only at the last node of classification scheme? The second example addresses a precise disposition schedule which is able to impose the event-driven chronological retention period to records and which could be operated using a inheritance concept between the parent nodes and child nodes in classification scheme. The third example shows the usage of the function which holds or freeze and release the records required to keep as evidence to comply with compliance like e-Discovery or the risk management of organizations under the premise that the records management should be the basis for the legal compliance. The last case shows some cases for bulk batch operation required if the records manager can use the ERMS as their useful tool. It is needed that the records managers are able to understand and interpret the specifications of functional requirements standards for ERMS in the practical view point, and to review the standards and extract required specifications for upgrading their own ERMS. The National Archives of Korea should provide various stakeholders with a sound basis for them to implement effective and efficient electronic records management practices through expanding the usage scope of the functional requirements standard for ERMS and making the common understanding about its implications.

• The Korean Journal of Archival Studies
• /
• no.20
• /
• pp.77-114
• /
• 2009

The actual conditions of the labor unions are primitive. First, there is no good records management regulation. At this research, I found it that most regulations of the labor unions were all the same. I think they have been copied a kind of one of originality. Second, the definition of records were very narrow, like documentary evidence. Third, the classification, filing, disposal regulations are the below level of the public institution in 1970s. Fourth, there are no standards of the records scheduling for the labor records. What kind of labor records have the historical values? I could not find, only the documentary evidence value. So, I think The actual conditions of the labor unions are primitive. I investigated the collections of the Southern Labor Archives in USA. There were many kind of records. For example, the records of regional labor unions also central labor unions, pamphlets, journals, photos, personal records, oral history, organizational records like protocols article of associations internal rules, minute books etc. Like this the collections of the Southern Labor Archives in USA are very various. But our actual conditions of the labor unions is far from that. Rather, we just have tried collected records for publishing the white papers. But this habitual practice would not be desirable. Because they must manage the records from the producing time. Mostly, 'laborer history HANNAE' were organised, and they are trying the collecting and management of the labor records. Also They are trying the computerizing, compilation. 'HANNAE' has the condition for the transformation of the labor archives. But if they want to be really, they must make the records management infra and so, should normalize the record management firstly. For example, They must be keep the standardized records management regulations, records scheduling redesigned. the developing standard model for the records management. And they have the vision for the hub of the labor archives. When coming to this, it will be realized the labor archives Now the records for the working class are disappearing. The managing the records for the labor is another labor movement. All together should join it. But I think the supporting of the archival science research colleagues will be the essential part.

• The Korean Journal of Archival Studies
• /
• no.25
• /
• pp.3-46
• /
• 2010

Digital records management is one whole system in which many social and technical elements are interacting. To maintain the trustworthiness, the repository needs periodical audit and certification. Thus, individual electronic records management agency needs toolkit that can be used to self-evaluate their trustworthiness continuously, and self-assess their atmosphere and system to recognize deficiencies. The purpose of this study is development of self-certification toolkit for repositories, which synthesized and analysed such four international standard and best practices as OAIS Reference Model(ISO 14721), TRAC, DRAMBORA, and the assessment report conducted and published by TNA/UKDA, as well as MoRe2 and current national laws and standards. As this paper describes and demonstrate the development process and the framework of this self-certification toolkit, other electronic records management agencies could follow the process and develop their own toolkit reflecting their situation, and utilize the self-assessment results in-house. As a result of this research, 12 areas for assessment were set, which include (organizational) operation management, classification system and master data management, acquisition, registration and description, storage and preservation, disposal, services, providing finding aids, system management, access control and security, monitoring/audit trail/statistics, and risk management. In each 12 area, the process map or functional charts were drawn and business functions were analyzed, and 54 'evaluation criteria', consisted of main business functional unit in each area were drawn. Under each 'evaluation criteria', 208 'specific evaluation criteria', which supposed to be implementable, measurable, and provable for self-evaluation in each area, were drawn. The audit and certification toolkit developed by this research could be used by digital repositories to conduct periodical self-assessment of the organization, which would be used to supplement any found deficiencies and be used to reflect the organizational development strategy.

• (The) Korean Journal of Educational Psychology
• /
• v.23 no.3
• /
• pp.645-663
• /
• 2009

The purpose of this study is to develop and verify a Korean Diagnostic Scale of Multiple Intelligence(MI), which will be an alternative test to avoid problems with former Shearer's MI test and to adopt H. Gardner's suggestions to develop MI assessment. The test is developed 5 types; kindergartner, elementary lower grader, elementary upper grader, middle schooler, high schooler test. A form of test is diversified with 3 types; multiple-choice items for accomplishment, true or false items for ability, and self-reported items with likert scale for interest and ability. According to H. Gardner's suggestions, we have tried to reanalyze key component of MI, analyze an overlapping or hierarchical relationship between intelligences, develop intelligences-fair items, diversify form of item. We have developed a final standardized test through a primary, secondary preliminary-test analysis, and sampled 5,585 students by age, gender, and regional groups. As a result of this sampling test, we can get a norm score and compare individuals with other's score relatively. To verify this test, we analyzed behavior observation, mean, standard deviation, a percentage of correct answers, reliability of each test type, correlation between intelligence scales, Kruskal-Wallis test of mean rank of career choice by intelligences. As a result of correlation analysis between sub-intelligence scales, we can conclude that this MI test is satisfied with intelligence independent assumption. Besides, as non-parametric statistics test(Kruskal-Wallis) of career choice by intelligences, we can identify that MI is related with domain of career choice. This test is not a linguistic and logical-mathematical biased test but a intelligences-fair test. It makes us compare individual's potential with a norm score. Besides, it could be useful as a means of educational prescription or counsel in comparison with ability, interest, and accomplishment of individual. But this test is limited to do factor or correlation analysis between types of sub-test, because items are minimized for a time-constraint and a heavy burden of test receiver. But if it could be tested with increased items by two sessions, further research could be expected to get over this constraints and do a further validation analysis.

• Journal of The Korean Society of Emergency Medicine
• /
• v.29 no.6
• /
• pp.663-670
• /
• 2018

Objective: Radio-contrast abdomino-pelvic computed tomography (APCT) is considered the gold standard diagnostic tool for an acute abdomen in the emergency department. On the other hand, APCT has a risk of contrast-induced nephropathy. Emergency physicians evaluate the creatinine (Cr) level prior to taking a APCT for the above reason but it takes time to evaluation the serum Cr level. This study hypothesized that Cr measured by a point-of-care test (POCT) can shorten the time to making clinically important decisions for patients with an acute abdomen. Methods: This prospective randomized study was conducted between March 2017 and October 2017. The subjects were divided into two groups (Cr measured by laboratory vs. Cr measured by POCT). To analyze the clinical acceptability for creatinine, agreement was demonstrated graphically by Bland-Altman plots. This study compared the time to make a clinically important decision by physicians and the length of stay at the emergency department in both groups. Results: A total of 76 patients were eligible for the study, 38 patients were assigned to each group. There was no statistically significant difference in the time to the first medical examination (P=0.222) and emergency department stay time (P=0.802). On the other hand, the time to recognition of the Cr level (P<0.001), time to performing APCT (P<0.001), time to decision making (P<0.001), and time to initiation of treatment (P<0.001) were shortened significantly in the point-of-care creatinine group. Conclusion: In this study, the POCT for creatinine can allow rapid decision making by shortening the time to performing the radio-contrast APCT than the laboratory for patients with an acute abdomen.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2019

The health benefits associated with consumption of fresh produce have been clearly demonstrated and encouraged by international nutrition and health authorities. However, since fresh produce is usually minimally processed, increased consumption of fresh fruits and vegetables has also led to a simultaneous escalation of foodborne illness cases. According to the report by the World Health Organization (WHO), 1 in 10 people suffer from foodborne diseases and 420,000 die every year globally. In comparison to other processed foods, fresh produce can be easily contaminated by various routes at different points in the supply chain from farm to fork. This review is focused on the identification and characterization of possible sources of foodborne illnesses from chemical, biological, and physical hazards and the applicable methodologies to detect potential contaminants. Agro-chemicals (pesticides, fungicides and herbicides), natural toxins (mycotoxins and plant toxins), and heavy metals (mercury and cadmium) are the main sources of chemical hazards, which can be detected by several methods including chromatography and nano-techniques based on nanostructured materials such as noble metal nanoparticles (NMPs), quantum dots (QDs) and magnetic nanoparticles or nanotube. However, the diversity of chemical structures complicates the establishment of one standard method to differentiate the variety of chemical compounds. In addition, fresh fruits and vegetables contain high nutrient contents and moisture, which promote the growth of unwanted microorganisms including bacterial pathogens (Salmonella, E. coli O157: H7, Shigella, Listeria monocytogenes, and Bacillus cereus) and non-bacterial pathogens (norovirus and parasites). In order to detect specific pathogens in fresh produce, methods based on molecular biology such as PCR and immunology are commonly used. Finally, physical hazards including contamination by glass, metal, and gravel in food can cause serious injuries to customers. In order to decrease physical hazards, vision systems such as X-ray inspection have been adopted to detect physical contaminants in food, while exceptional handling skills by food production employees are required to prevent additional contamination.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.4
• /
• pp.202-209
• /
• 2018

This study was conducted to compare annual productivity of whole crop rice and winter crops in paddy field of southern region in Korean peninsular. Whole crop rice (WCR) varieties used in this experiment were Suwon 605, Yeongwoo, and Mogwoo bred at the National Institute of Crop Science (NICS), and Rye (Gogwoo), Italian ryegrass(IRG, Greenfarm) and Triticale (Choseong) were used as winter crops. Each crop was cultivated using the standard cultivation method and harvesting of whole rice was carried out about 30 days after heading date. The dry matter (DM) content was the lowest in Italian ryegrass (p<0.05), and the highest value was 29.4% in triticale. The dry matter yield of rye was the highest (p<0.05), and there was no significant difference between Italian ryegrass and triticale (p>0.05). There was no difference in forage quality among seeding time of each species, but there was a difference among the species (p<0.05). In particular, rye showed lower CP, IVDMD, TDN and RFV values than other species. The average dry matter production of whole crop rice was 18,484 kg/ha, but there was no significant difference among the cultivars (p>0.05). Crude protein (CP) content was significantly lower in Mogwoo than other and TDN and RFV values were the highest in Mogwoo. In the annual productivity evaluation, combination of rye-Suwon 605 showed the highest DM yield at 26,515kg/ha. Based on the above results, it was concluded that the combination of Suwon 605-rye (Gogwoo) was the most effective cropping system for annual forage production using whole crop rice and winter crop in the southern region of Korean peninsular.