• Korean System Dynamics Review
• /
• v.6 no.2
• /
• pp.53-71
• /
• 2005

In the short view, the medical fee regulation has contributed for patients by reducing their hospital expenses and helping them to visit hospital more easily. But, some medical parts have gone into red ink because the medical fee has been different with each item. So, that medical parts have been experienced the medical specialist shortage. And some hospitals have been interested in high-priced medical services to cover their deficit. Moreover, most medical doctors don't need to use low-priced medicine undergo these circumstance, domestic small and medium pharmaceutical company has been going into bankruptcy and the dependence on foreign drug company has been rising. If these abnormal medical service keep to patience, people will get more burden of medical fee cause 9 casual loop work very complicated. In other words, present medical fee regulation were made by some politicians who had plain thinking. Those who govern the people, therefore, stand for not present medical service user but the welfare and health promotion of people and give attention to desirable medical fee with systems thinking.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.129-135
• /
• 2004

This paper discussed on the effect of an intermediate support on the stability of elastic material subjected to dry friction force. It is assumed in this paper that the dry frictional force between a tool stand and an elastic material can be modeled as a distributed follower force. The elastic material on the friction material is modeled for simplicity into an elastic beam on Winkler-type elastic foundation. The stability of beams on the elastic foundation subjected to distributed follower force is formulated by using finite element method to have a standard eigenvalue problem. The first two eigen-frequencies are obtained to investigate the dynamics of the beam. The eigen-frequencies yield the stability bound and the corresponding unstable mode. The considered beams lose its stability by flutter or divergence, depending on the location of intermediate support.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1876-1881
• /
• 2001

We present the numerical analysis of the growth of a silicon (Si) single crystal. In the MCZ (Magnetic-field-applied Czochralski) method, two magnetic fields that stand opposite to each other generate a cusp magnetic field. In this work, the three cusp magnetic fields used for the analysis are an extern magnetic field, a surface magnetic field and an internal magnetic field. Each case was evaluated mainly as to the degree of stirring, shaft symmetry and the stability of the flow. As a result, the cusp magnetic field that yielded to best conditions was the internal magneic field.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1779-1792
• /
• 2009

Now, the goal of the third generation KTX project is to create a new species of high speed train in order to open a new era of high speed railway system in history by authentic Korean technology and innovative design. Now the third generation KTX, must go beyond the original stagnant paradigm and be positioned as an emotional resource which is creating a shift in the public's perspective of transportation and expanding the idea that transportation intersects the two distinct realms of culture and environment as well. In addition, the overall design should reflect the Korean culture and characteristics, simple yet resonant, both the interior space and the exterior fuselage should portray the dynamic heritage of Korea such as the powerful yet subdued energy of Jung Joong Dong. In short, through the symbolic key words in Korean, Dong(Dynamics), Mek(Pulse), Ryu(Flow), Gam(Sensibility), the third generation KTX design project aims to create an new identity of Korean high speed railway which can stand globally.

• The Korean Journal of Ecology
• /
• v.21 no.6
• /
• pp.751-757
• /
• 1998

Nitrogen dynamics in mineral soils of an alder (Alnus maximowiczii) stand established on volcano Mt. Showa-Shinzan were measured by laboratory incubation method in order to clarify characteristics of $NH_{4}^{+}$ mineralization and nitrification rate, from August 1994 to July 196. Contents of total N and organic matter were relatively low, but increased in May-July. Extractable $NH_{4}^{+}$ concentrations and $NH_{4}^{+}$ mineralization were high in June and July, and decreased in midsummer and fall. Extractable $NO_{3}^{-}$ concentrations did not vary seasonally. Negative values at $NH_{4}^{+}$ mineralization and nitrification rate were observed in August and September. $NH_{4}^{+}$ mineralization was positively correlated with soil organic matter, and nitrification rates were influenced by extractable $NH_{4}^{+}$ concentration and $NH_{4}^{+}$ mineralization.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.295-308
• /
• 2009

Now, the goal of the third generation KTX project is to create a new species of high speed train in order to open a new era of high speed railway system in history by authentic Korean technology and innovative design. Now the third generation KTX, must go beyond the original stagnant paradigm and be positioned as an emotional resource which is creating a shift in the public's perspective of transportation and expanding the idea that transportation intersects the two distinct realms of culture and environment as well. In addition, the overall design should reflect the Korean culture and characteristics, simple yet resonant, both the interior space and the exterior fuselage should portray the dynamic heritage of Korea such as the powerful yet subdued energy of Jung Joong Dong. In short, through the symbolic in Korean, Dong(Dynamics), Mek(Pulse), Ryu(Flow), Gam(Sensibility), the third generation KTX design project aims to create an new identity of Korean high speed railway which can stand globally.

• The Korean Journal of Ecology
• /
• v.9 no.1
• /
• pp.59-71
• /
• 1986

Net production, dead material increments were measured, and annual respiration loss was simulated through a year to determine the gross production at the Phragmites longivalvis, Carex scabrifolia and Zoysia sinica stand on Okryudeung, a sand bar of the Nagdong river estuary. The maximum live biomass for above-ground organs of the three stands occured in October, i.e., 1, 985, 744 and 1, 013g/m2, and belowground net productions were estimated to be 650, 440 and 412g/m2, respectively. Materials died or shedding from live aboveground organs during the growth season were estimated to be 167, 81 and 0 g/$m^2$. From the results of simulation, annual variation of respiratiion was primarily dependent on the annual variation of temperature through a year. For annual respiration loss in three stands, 21.893, 6.147 and 5.036kg $CO_2/m^2$ were calculated, respectively. Corresponding gross productions were 72, 203, 22, 109 and 19, 909kcal/$m^2$. Respiration of belowground organs corresponded to 65%, 66% and 37% of the total plant respiration, and annual respiration loss accounted for 85%, 78% and 71% of the annual gross production. In view of efficiency of solar energy utilization, 5.8%, 1.8% and 1.6% of incident light energy were converted to gross production of plants during a year. With incident light energy during the growth season from April to September, energy utilizations for net production were estimated to be 1.2%, 0.4% and 0.6% at the three stands.

• Journal of Ecology and Environment
• /
• v.39 no.1
• /
• pp.51-60
• /
• 2016

This study was conducted to examine litter fall, litter decomposition, and a short-term nutrient (C, N, P, K, Ca, and Mg) status for one year at various levels of basal area (21.4, 27.0, 30.8, 37.0, 42.1, and 46.7 m² ha^-1) in approximately 40-yearold red pine (Pinus densiflora S. et Z.) stands in the Hwangmaesan mountain forest in Korea. Monthly fluxes of litter fall components such as needles, broad leaves, branches, bark and total litter fall followed a similar pattern at various levels of basal area. Mean annual needle, bark and total litter fall fluxes were positively correlated with increased basal area (p<0.05), but the woody litter such as branches and cones was not correlated with basal area. Carbon and K concentrations of needle litter were negatively correlated with increased basal area, while nutrient (C, N, P, K, Ca, and Mg) fluxes were positively correlated with the basal area treatments. Remaining mass, N and P concentration and remaining N and P stocks in decomposing needle litter were not affected by the basal area. However, the concentration and stocks remaining of K, Ca, and Mg from decomposing litter were positively correlated with increased basal area during the initial three months of decomposition. The results indicate that basal area has an impact on nutrient cycles through change in litter fall and litter decomposition processes; thus, the dynamics of nutrient cycles based on a stand scale could differ considerably with different levels of basal area in red pine stands.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1243-1248
• /
• 2011

The purposes of this study were to develop a dynamic model of a human and to investigate the effect of a walker on an elderly subject's motions, such as sit-to-stand (STS) motion and normal gait, by using this model. A human model consisting of 15 segments and 14 joints was developed, embedded in $RecurDyn^{TM}$, and connected through a Simulink$^{(R)}$ interface with collected motion data. The model was validated by comparisons between joint kinematic results from inverse dynamics (Matlab$^{(R)}$-based in-house program) and from $RecurDyn^{TM}$ simulation during walking. The results indicate that the elderly walker induced a longer movement time in walking, such that the speed of joint flexion/extension was slower than that during a normal gait. The results showed that the muscle activities of parts of the ankle and hamstring were altered by use of the elderly walker. The technique used in this study could be very helpful in applications to biomechanical fields.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.105-111
• /
• 1997

Root dynamics of a pine stand at Hongcheon, Korea was assayed with two kinds of soil samplers which had been tentatively manufactured to renovate the routine soil sampler, Oakfield soil sampler. Root-mixed soil samples were collected on December of 1995, March, May, August and December of 1996 within each randomly selected 8 plots. The amount of roots collected by the two kinds of soil samplers were not significantly different at the 5% level, which indicated that the renovated sampler was more desirable to be used since the sampler showed efficiencies in time for collection and quantification than the routine sampler. The quantities of total root in 100g soils were 469mg on December of 1995, and 352mg, 473mg, 461mg, 522mg on the following March, May, August and December, respectively. That is, total amount of roots showed the smallest in Spring and reached maximum in early Winter, although the differences were not significant among each season. By the way, the alive roots and dead roots showed significant differences among season, the alive roots took about 90% from May to early December while they decreased down to some 65% from late December to March. The roots of Pinus densiflora S. et Z. took about 46% of total roots although the species comprised 70% of crown layer, and the ratio of fine-roots of the species were higher than that of other species. By the way, the dynamics of total roots and that of alive roots were quite different. Thus, the study for root dynamics such as fine roots which take a major role for mycorrhizae formation or nutrient uptake should not be inferred from the data of total root dynamics but be investigated in detail by dividing them into each class.