• PNF and Movement
• /
• v.21 no.2
• /
• pp.223-229
• /
• 2023

Purpose: Assessing physical strength and muscle mass is crucial, but many methods rely on specialized equipment, which can be challenging. In situations where a quick and straightforward test is needed, the sit-to-stand test (STST) proves useful. Although several studies have investigated STST and muscle mass separately, the actual correlation between these two factors has not been extensively researched. Hence, the objective was to comprehensively investigate the correlations between the different tests. Methods: The study participants consisted of 20 healthy young men in their 20s. In this study, measurements were taken for muscle mass, the five-times sit-to-stand test, the 30-second sit-to-stand test, and the 1-minute sit-to-stand test. The results of each test were analyzed using Pearson's correlation analysis. Results: Although no significant correlation was found between muscle mass and STST, interestingly, significant correlations were observed among the different types of STST. Conclusion: The STST is a rapid and straightforward test used to assess lower limb strength and balance ability in individuals. However, there is a dearth of research on STST conducted in domestic settings. Based on the findings of this study, further research is necessary to establish age- and gender-specific reference values for STST. This will allow its broader application, encompassing not only older adults and patients but also healthy individuals.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.458-464
• /
• 2001

In this study, the annual growth of roots and their branching forms of Norway spruce(Picea abies [L.] Karst.) were analysed to compare the development of their root in the differently acidified forest soils. And there was no significant difference among the stands for the modified roots and the non-modified roots depending on the root branch forms, and however in the most acidified Weidenbrunnen stand, the modified roots, the abnormal root branch form such as fork, gun and rake types were appeared. As a result of the ring of the root, the annual horizontal root growth were 6.3cm for Weidenbrunnen and Barbis stands and 9.5cm for Eberg$\ddot{o}$tzen stand. The average annual vertical root growth was 4.4cm, 5.4cm, and 6.7cm for Weidenbrunnen stand, Barbis stand, and Eberg$\ddot{o}$tzen stand, respectively. The cross section area by root distribution at 80cm deep showed that the thick and thin roots were evenly distributed in of Eberg$\ddot{o}$tzen stand and the sum of root cross section area was $32.6cm^2$. In Barbis stand, the thick roots were distributed in the center while the thin roots were comparatively rare. And the sum of root cross section area was $29.2cm^2$. In Weidenbrunnen stand, only a few thin roots were found, and the total root cross section area was $10.9cm^2$. The stability coefficient of roots were in the order of Eberg$\ddot{o}$tzen stand(1.04), Barbis stand (0.3), and Weidenbrunnen(0.08) stand. Among the investigated Norway spruce stands, the modified abnormal root branching form and the low root growth appeared in the Weidenbrunnen stand could be attributed by the soil acidification etc.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.169-185
• /
• 2016

Recently mean stand height has been added as new attribute to forest type maps, but it is often too costly and time consuming to manually measure 9,100,000 points from countrywide stereo aerial photos. In addition, tree heights are frequently measured around tombs and forest edges, which are poor representations of the interior tree stand. This work proposes an estimation of mean stand height using an image-based point cloud, which was extracted from stereo aerial photo with FUSION S/W. Then, a digital terrain model was created by filtering the DSM point cloud and subtracting the DTM from DSM, resulting in nDSM, which represents object heights (buildings, trees, etc.). The RMSE was calculated to compare differences in tree heights between those observed and extracted from the nDSM. The resulting RMSE of average total plot height was 0.96 m. Individual tree heights of the whole study site area were extracted using the USDA Forest Service's FUSION S/W. Finally, mean stand height was produced by averaging individual tree heights in a stand polygon of the forest type map. In order to automate the mean stand height extraction using photogrammetric methods, a module was developed as an ArcGIS add-in toolbox.

• Journal of Korea Foresty Energy
• /
• v.18 no.2
• /
• pp.92-99
• /
• 1999

This study was carried out to understand the primary production of biomass, vertical biomass distribution in the stand and the difference of biomass production for part of the trees by stand density for natural Pinus densiflora forest at Mt. Baekdoo located in northeastern China. The primary production of biomass was estimated by the layers of trees, shrubs, herbs for five density classes. For the biomass estimation of the Pinus densiflora trees in stern, stembark and the above-ground tree, the regression model of logW = a + blog(D$^2$H) + c(D$^2$H) was adapted for all of the density classes where W is dry weight, D$_1$ diameter at breast height, and H, tree height. For the biomass estimation in branch and needle, and the needle area, the regression model of logW=a+blogD+cD was adapted for all of the density classes. With increasing stand density the biomass of trees increased but that of shrubs and herbs decreased. Net primary production of biomass in parts of the tree also increased with increasing stand density. However the percentage of the needle biomass among the total biomass in the above-ground tree decreased with increasing stand density. Consequently, primary production rate of biomass in the above-ground tree increased. The primary production of biomass for each part of the trees in natural Pinus densiflora natural forests showed in descending order : stern, needle, branch, and stembark regardless of stand density.

• Journal of Korean Society of Forest Science
• /
• v.80 no.2
• /
• pp.187-192
• /
• 1991

This study was carried out to estimate the stand volume for Japanese larch(Larix leptolepis) by Strand sampling method. The data collected for this study were based on the 380 sample plots from the field survey, which were distributed in the major part of Korea(Kyeongi, Kangweon, Chungbuk, Chungnam, Chunbuk and Kyeongbuki), and the plotless sampling instrument such as dendrometer, spiegel relascope and tele-relascope were used. The procedure for this study is summarized briefly as follows : 1. There were not only significant differences between volume estimation by Strand sampling method and that by plot survey method, and the relationship was y=bx, where b approached nearly 1. Therefore, the stand volume of Japanese larch could by estimated by Strand sampling method. 2. The value measured by three different plotless sampling instruments did not showed any significant differences between instruments and observers, density and instruments, and ground slope and instruments. 3. With the stand volume, basal area height showed the highest correlation and stand form height, average height, basal area per ha correlated with the volume in thier orders. 4. The best fitted equation of stand volume estimation with basal area height by relascope was as follow. log V=-0.0375+0.8910 log GH-1.5946 1/GH Stand volume table also was obtained using the above estimeated equation. 5. The relationship between estimated value and actual value was Y=bx, where b was nearly 1. The correlation coefficient was very high and the percentage of estimated error was 4.5%.

• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.457-464
• /
• 2017

This study has utilized the stand density management diagram to devise an efficient management standard for the stand density for Pinus densiflora that secures the health of the stands and predicted the harvest goals. The appropriate stand control level was estimated by modeling the relationship of the relative yield index (Ry) to the ratio of slender trees within the stand through an exponential function; the coefficient of determination ($R^2$) was found to be 0.424 according to the estimation. The ratio of slender trees within the stand showed a tendency of rapid increase at a certain relative yield index; with this relational function, the appropriate Ry value of 0.84 was obtained. By estimating the curve of the Ry value 0.84, which was the appropriate stand density management level, as well as the height of dominant trees in the central region of Korea, the production objective for each site index was set. Assuming that the final age by the site indices ranged from 10 to 16 for the P. densiflora in central region of Korea, the number of production was estimated to be between 426 to 1,311 trees per ha. It was predicted that the production of medium-diameter logs larger than 30 cm in diameter is possible for the target DBH at a site index of more than 16; small-diameter logs larger than 20 cm in diameter for site indices 12 and 14 enabled, and small-diameter logs of less than 20 cm for site index 10.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.827-835
• /
• 2010

Reliable forest statistics provides important information to meet the UNFCCC. In this respect, the national forest inventory has played a crucial role to provide the reliable forest statistics for several decades. However, the previous forest statistics calculated by administrative district has not provided spatial information in a small scale. Thus, this study focused on developing models to estimate an explicit spatial distribution of forest growing stock. For this, first, stand volume model by stand types was developed using National Forest Inventory(NFI) data. Second, forest type map was integrated with this model. NFI data were used to calculate plot-level stand volume and basal area. The stand types of NFI plot including the species composition, age class, DBH class and crown density class are very crucial data to be connected with forest type map. Finally, polygonlevel stand volume map was developed with spatial uncertainty map. Average stand volume was estimated at 85.7 $m^3$/ha in the study area, and at 95% significance interval it was ranged from 79.7 $m^3$/ha to 91.8 $m^3$/ha.

• Journal of Korean Society of Forest Science
• /
• v.107 no.2
• /
• pp.174-183
• /
• 2018

This study aims to make the stand density management diagram which is useful for establishing stand density management system in Chamaecyparis obtusa forest. By using 216 sample plots to estimate Yield-Density relationship ($R^2=0.743$), the stand density management diagram was modeled by the estimated parameters. As a result of this diagram, after planting 3,000 trees per hectare the mortality rate of this unthinned C. obtusa stands over 80 years was estimated to be equal to $12.0{\sim}18.1trees{\cdot}ha^{-1}{\cdot}year^{-1}$, and stand volume was $463.1{\sim}695.4m^3{\cdot}ha^{-1}$, and stand density was $1,555{\sim}2,038trees{\cdot}ha^{-1}$. Developed stand density management diagram for C. obtusa is effective to establish the management criteria and production objective. Therefore, this study allowed us to make the optimal forest working plan.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.3
• /
• pp.265-269
• /
• 2009

Technology development for sufficient dry matter production of Chinese milk vetch (CMV) is most important in CMV-rice cultivation system in order to provide sufficient nutrients to rice plants. However, when the CMV plants are dominated by the weed, especially Alopecurus aequalis, the CMV growth could be reduced due to light and nutrient competition. In addition, A. aequalis is potential host of the rice dwarf virus disease. Therefore, control of A. aequalis is necessary to enhance the biomass production of CMV plants when CMV stands are insufficient. The use of chemical like sethoxydim (20%, ai) showed the highest control rate of 84% at early stage and was reduced as application was delayed. A. aequalis control did not change the CMV seedling stand before and after herbicide treatment and the reseeding stand in fall was rather increased 2.2 to 2.6 times. On the other hand, in untreated control, the CMV stand at May 15 and reseeding stand in fall was significantly reduced as compared with the before herbicide treatment. Control of A. aequalis increased the CMV dry matter production by 164% for 50% CMV coverage rate and 63% for 25% CMV coverage rate. This is equivalent to $12.3{\sim}16.4\;kgN$/10a which is greater than the recommended nitrogen rate of 9kg/10a. The result indicates that the control of A. aequalis is an efficient way to enhance dry matter production in CMV-rice cultivation system especially when CMV stand is poor.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.1
• /
• pp.1-11
• /
• 2002

This study was conducted to reveal the effects of local climatic conditions on the early growth of Korean white pine progeny test stands. For this, stand variables such as mean DBH, mean height, basal area per hectare, and volume per hectare by stand age and locality were first measured and summarized for each stand. Based on these statistics, annual increments for 10 years from stand age 10 to 20 were calculated for each of stand variables. The effects of local climatic conditions as one of environmental factors on the growth were then analyzed by both a topoclimatological method and a spatial statistical technique. From yearly climatic estimates,30 climatic indices which affect the tree growth were computed for each of the progeny test stand. The annual increments were then correlated with and regressed on the climatic indices to examine effects of local climatic conditions on the growth. Gapyung area provided the best conditions for the early growth of Korean white pine and Kwangju area ranked second. On the other hand, the growth pattern in Youngdong ranked last overall as expected. It is also found that the local growth patterns of Korean white pine in juvenile stage were affected by typical weather conditions. The conditions such as low temperature and high relative humidity provide favor environment for the early growth of Korean white pine. Especially, it was concluded that the low temperature is a main factor influencing the early growth of Korean white pine based on the results of correlation analysis and regression equations developed far the prediction of annual increments of stand variables.