• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.113-119
• /
• 2002

Nanoimprint lithography (NIL) is a nanofabrication method known to be a low cost method of fabricating nanoscale patterns as small as 6 m. This study is focused on understanding physical phenomena in the embossing of nano/micro scale structures with 100 nm minimum feature size. We present the effects of capillary force and width of stamp groove on flow behavior at the embossing stage through numerical experimentation. We also compare our numerical results with previous experimental results and discuss our results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.290-293
• /
• 2009

This paper presents the development of a disposable label-free biosensor for bio molecular interaction analysis. Label-free biosensors have advantages of high performance in sensitivity and short detection time. Among various label-free systems, we introduced biosensor with nano grating structures based on white light source and spectrometer. And to develop high efficiency label-free biosensor, we suggest replicating processes satisfying required specification. We also report a system set-up to evaluate the characteristics of phenomenon shown in this biosensor system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.151-155
• /
• 2001

The purpose of this study is to investigate the weldline movement of the laser welded sheets during the warm deep drawing process. For this investigation, Five steps of temperature ranges, from room temperature to $200^{\circ}C$, and two kinds of thickness combination, 0.8 mm${\times}$1.2 mm and 0.8 mm${\times}$1.6 mm SCP1 material sheets, were adopted. Also, the numerical analysis using the PAM-STAMP has been carried out with the same models as the specimens. As a result the higher temperature was adopted, the less weld-line movement was observed.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.466-469
• /
• 2000

In this paper, a watermarking technique for digital images is proposed. In our method, an image is 1-1eve1 wavelet transformed, and then the watermark of a binary stamp is embedded into the baseband. The watermark is embedded by inverting the polarities of the selected coefficient pairs. In the inverting process, we can increase perceptual image quality by finding means and differences of the selected neighboring coefficient pairs, and then adding values, which are inversely proportional to the differences, to the means. The experimental results show that the proposed method has good quality and is robust to JPEG lossy compression and various image processing operations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1118-1121
• /
• 2009

We have fabricated inverted staggered pentacene Thin Film Transistor (TFT) with 1-${\mu}m$ channel length by micro contact printing (${\mu}$-CP) method. Patterning of micro-scale source/drain electrodes without etching was successfully achieved using silver nano particle ink, Polydimethylsiloxane (PDMS) stamp and FC-150 flip chip aligner-bonder. Sheet resistance of the printed Ag nano particle films were effectively reduced by two step annealing at $180^{\circ}C$.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.1631-1634
• /
• 2002

멀티미디어 서버는 클라이언트가 요청한 멀티미디어 데이터 스트림을 효율적으로 제공하기 위해 사용된다. 현재, 정보통신 기술의 발달로 인해 멀티미디어 서버는 멀티미디어 정보를 온라인으로 서비스 할 수 있게 되었다. 하지만 네트워크 상에서 발생하는 Packet Delay 에 때문에 서버에서 사용자에게 연속적이고 엄격한 실시간 제약이 있는 비디오 전송과 같은 멀티미디어 서비스를 제공하는 것은 매우 힘들다. 따라서, 본 논문에서는 서버에서 필요한 Packet 를 먼저 전송하여 Packet Delay 를 줄이는 방법을 제안하였다. MPEG-4 에서 오브젝트의 AU(Access Unit)들의 디코딩 시간을 표시하는 DTS(Decoding Time Stamp)를 참조하여 생성된 Deadline threshold 를 기준으로 Deadline 이 가장 빠른 AU부터 전송하는 스케줄링 알고리즘을 이용하여 MPEC-4 미디어 오브젝트를 스트리밍한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.4
• /
• pp.460-467
• /
• 1998

The investigation deals with the manufacturing process design and deformation analysis for seamless pressure vessels Axisymmetric multistage deep drawing is a complex and important sheet metal forming process in the industry. In this study the process design for large size cylindrical shells with various thickness is performed and a general guideline for forming process design of pressure vessels will be suggested. Thus in this paper for the verification of the forming process design the forming analysis of pressure vessels will be carried out by PAM-STAMP which is on the basis of finite element analysis. In this case the formability of pressure vessels is evaluated using the results of computer simulation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.3
• /
• pp.38-45
• /
• 2009

Recently, LCD Backlight Unit is being replaced from cold cathode fluorescent lamp(CCFL) to external electrode fluorescent lamp(EEFL) because the EEFL has high energy efficiency and long life. Also, it can reduce energy consumption and weight. So far, external electrode ring for EEFL is produced by sheet metal press forming process. Therefore it had low precision and much material loss. To solve these problems, Multi-Forming process that has five step forming process was invented. However, low productivity is another barrier. Product speed that is controlled by the rotational speed cannot be increased due to the unsatisfied design specification. The reason is that the gap between rolled two edge parts of the sheet plate is tightly inspected. Regarding this factor, the understanding of forming behavior to each process is inevitable. This paper describes the CAE analysis of the multi-forming process by PAM-STAMP.

• KSCI Review
• /
• v.15 no.1
• /
• pp.99-102
• /
• 2007

최근 들어 인간의 의지를 각종의 전자시스템에 전달하기 위한 수단으로 음성인식 기술을 이용하고자 하는 연구가 널리 진행되고 있다. 음성인식 인터페이스에서 가장 중요한 이슈는 처리시간의 감소 및 범용 인터페이스의 개발이다. 이러한 문제점을 해결하기 위하여 본 연구에서는 하드웨어 기반의 상용 IC로 생산되고 있는 음성인식프로세서인 RSC-4128이 내장된 음성인식 모듈 VR-STAMP를 사용하였다. 본 연구에서 새롭게 개발한 시스템은 T2SI(Text To Speaker Independent) 기반의 화자(話者)독립 방식으로 음성인식 신호를 컨텐츠 네비게이션 시스템의 제어신호로 활용하여 임베디드 시스템 및 PC 등에 설치된 윈도우즈 기반의 응용 소프트웨어를 제어할 수 있는 시스템이다. 필드 테스트를 통해 그 유용성을 확인한 결과, 본 연구에서 개발한 시스템은 컨텐츠 네비게이션은 물론 가전기기 제어 및 흠 네트워크 등에 널리 응용될 수 있을 것으로 판단된다.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2005

Ethernet is being deployed in metropolitan area networks (MANs) as a lower-cost alternative to SONET-based infrastructures. MANs are usually required to support common communication services, such as voice and frame relay, based on legacy synchronous TDM technology in addition to asynchronous packet data transport. This paper addresses the clock synchronization problem that arises when transporting synchronous services over an asynchronous packet infrastructure, such as Ethernet. A novel algorithm for clock synchronization is presented combining time-stamp methods used in the network time protocol (NTP) with signal processing techniques applied to measured packet interarrival times. The algorithm achieves the frequency accuracy, stability, low drift, holdover performance, and rapid convergence required for viable emulation of TDM circuit services over Ethernet.