• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.276-279
• /
• 1996

This paper deals with the method providing an exact solution to the 3-dimensional guillotine cutting stock problem. We suggest a 3-stage sutting method using the property that cubic material has to be cut into 2-dimensional planes firstly. This method requires more stocks that the general guillotine cutting methods but can save work force. By using the 1-dimensional dynamic programming, we reduce the computational time and the memory requirement in the 3-stage guillotine cutting method.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.1
• /
• pp.82-91
• /
• 2009

Research was initiated to investigate vegetation characteristics of native ('Pureundle' and 'Sewon') and introduced ('Brilliant' and 'Midnight') Kentucky bluegrass (KB, Poa pratensis L.) varieties by soil-seed applying system on a cut-slope in May 17, 2008. There were no statistic differences observed in soil hardness and soil moisture content while significant differences were observed in surface coverage rate, height and disease occurrence in native and introduced KB varieties. The introduced 'Brilliant' KB was highest in the surface coverage rate from the early period of seeding to August 11, 2008. The surface coverage rate of introduced varieties were high when compared to native varieties in their early growth stage. But native varieties reached to equal surface coverage rate with the introduced varieties when three months after seeding. The height of 'Pureundle' and 'Brilliant' KBs were high compared with Midnight and Sewon KBs. 'Pureundle' and 'Brilliant' KBs were damaged by disease whereas there were no disease occurrence in 'Midnight' and 'Sewon' KBs. Probably, the disease occurrence was close related with the height of KBs not with native and introduced KB varieties. These results indicate that the growth of KB on a cut-slope are statistically affected by varieties in early growth stage of this experiment but reach equal rate between native and introduced KB varieties in three months after seeding. This growth characteristics implies the huge potential of native KB varieties seeding for cut-slope vegetation. Considering that native KB varieties are adapted to a environment and have no risk of causing disturbance to the ecosystem compared to the introduced KB varieties, the use of them as native varieties for a cut-slope vegetation can be increased.

• Journal of Animal Science and Technology
• /
• v.63 no.4
• /
• pp.799-814
• /
• 2021

Information is lacking about the effect of date of a fall cut of alfalfa (Medicago sativa L.) on dry matter yield (DMY), forage nutritive value, and stands persistence. The objective of this study was to determine the effect of timing of a fall cut on DMY, forage nutritive value and stand persistence of three alfalfa varieties: low-lignin Hi-Gest 360, Roundup Ready Tonica, and conventional Gunner in Northeastern Kansas in the United States. The field study was carried out by splitting plot in randomized complete block design with four replications. The harvesting data of different maturity stages were collected in each year from 2015 to 2018. Three cuts were harvested based on the stage of maturity, and the last (fourth) cut was done on September 15, September 30, October 15, and October 30 of each year. The persistence of the alfalfa stands was determined each fall after the last cut, and each spring after the first cut, by counting the number of live plants in a randomly placed quadrat in each plot. Alfalfa cut on September 15 and September 30 had a higher stand persistence compared to alfalfa cut on October 15 and October 30. The DMY of the first cut in 2016 was significantly higher in roundup ready than the low-lignin alfalfa variety. In the second cut, DMY was significantly higher in conventional alfalfa than the roundup ready. There were no significant differences in DMY between alfalfa varieties in the rest of seasonal cuttings in 2016 and 2017 and annual total yield in both years. In general, low lignin alfalfa variety had higher crude protein and relative feed value and lower acid detergent fiber and neutral detergent fiber contents than those in roundup ready and conventional alfalfa varieties. On average, nutritive value of alfalfa was generally affected by last cutting dates in 2017. Based on 3-year data the last cutting of alfalfa in the fall could be done by September 30-October 15 without harmful effect on DMY.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.1
• /
• pp.12-20
• /
• 1998

This study was carried out from June 1996 to November 1997 to analyze the growth characteristics of the introduced species revegetated on highway cut-slopes. The number of revegetation measures type surveyed were fourteen such as seed-spraying measures, block-sod pitching measures, and hydro-seeding measures with seed-fertilizer-soil materials. The introduced species for revegetation measures were mostly Festuca arundinancea(cool season grass), Eragrostic curvula(warm season grass), Lolium perenne(cool season grass), Dactylis glomerata(cool season grass), Poa pratensia(cool season grass). The species diversity index of the upper part on highway cut-slopes were greater than that of the middle part and lower part. The growth of introduced species was good on north-facing cut-slope than the others and that was flourish in temperate north forest zone. Also, the introduced species seemed to decrease or disappear, while the ratio of native woody and herb species which were in mature stage seemed to increase.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.5
• /
• pp.289-296
• /
• 2022

In this paper, we developed a deep learning-based recyclable object detection model. The model is developed based on YOLOv5 that is a one-stage detector. The deep learning model detects and classifies the recyclable object into 7 categories: paper, carton, can, glass, pet, plastic, and vinyl. We propose two methods for recyclable object detection models to solve problems during training. Bounding Box CutMix solved the no-objects training images problem of Mosaic, a data augmentation used in YOLOv5. Standardized Distance-based IoU replaced DIoU using a normalization factor that is not affected by the center point distance of the bounding boxes. The recyclable object detection model showed a final mAP performance of 0.91978 with Bounding Box CutMix and 0.91149 with Standardized Distance-based IoU.

• Journal of People, Plants, and Environment
• /
• v.23 no.2
• /
• pp.171-178
• /
• 2020

The present study was conducted to determine the effects of electron beam irradiation on the postharvest quality of cut flowers. Cut flowers were irradiated with electron beam at 100, 200, 400, 600, 800, 1,000, and 2,000 Gy with a 10 MeV linear electron beam accelerator to evaluate their irradiation tolerance. Postharvest quality was determined by monitoring fresh weight loss, flower longevity, flower diameter, flowering rate, visual quality of flowers and leaves, and chlorophyll content. Cut flowers showed a radiation-induced damage with increasing the irradiation dose. Flower longevity and fresh weight of cut flowers decreased when the irradiation dose was increased. Flower bud opening was also inhibited in a dose-dependent manner. The effective irradiation doses for 10% reduction of postharvest quality (ED₁₀) values were 144.4, 451.6, and 841.2 Gy in the 'Medusa' lily, 'Montezuma' carnation, and 'Rosina White' eustoma, respectively. Although tolerance of cut flowers to electron beam irradiation vary according to species, cultivars, or maturity stage conditions, it is conceivable that 'Montezuma' carnation and 'Rosina White' eustoma could be tolerated and maintained overall postharvest quality up to 400 Gy, the generic irradiation dose approved by the Animal and Plant Health Inspection Service (APHIS) and the International Plant Protection Convention (IPPC) for postharvest phytosanitary treatments.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.718-724
• /
• 2012

Sugars play important roles in petal senescence of cut flowers. In the Expt. 1 of this study, the effects of different concentrations of glucose (60, 90, and $120g{\cdot}L^{-1}$) and sucrose (30, 60, and $90g{\cdot}L^{-1}$) application on the vase life, rate of flower diameter increase, rate of flower weight increase and ethylene production of cut tree peony (Paeonia suffruticosa 'Luoyang Hong') were evaluated. At the earlier stage, treatments of different concentrations of glucose and sucrose all retarded the process of flower opening and inhibited the increase of flower diameter and weight, while senescence of flowers fed with different concentrations of glucose was delayed at later stage. Flowers treated with $90g{\cdot}L^{-1}$ glucose displayed the longest vase life, which showed significant difference (P < 0.05) from those of flowers with the control and sucrose treatments. All treatments with glucose or sucrose not only retarded the decrease of flower diameter and weight, but also suppressed the ethylene production at the earlier stage and delayed the peak of ethylene evolution. In order to study the effect of exogenous sugar on the postharvest response of cut tree peony to ethylene, Expt. 2 was conducted. Cut flowers were treated with $90g{\cdot}L^{-1}$ glucose for 4 hours before (GE) or after (EG) exposed to $10{\mu}L{\cdot}L^{-1}$ ethylene for 4 hours. Generally, the opening process of flowers with GE and EG treatments was similar to that of the control, however GE treatment delayed flower senescence. Both GE and EG treatments improved flower diameter and weight, and GE treatment delayed the time of flower weight decrease. Besides, GE delayed climacteric ethylene evolution for 8 hours. All above suggest that exogenous sugars delay tree peony 'Luoyang Hong' cut flower senescence and extend flower vase life through their roles in the decrease of water loss and the suppression of sensitivity to ethylene and ethylene production.

• Journal of Plant Biology
• /
• v.16 no.1_2
• /
• pp.1-5
• /
• 1973

Six young trees of Alnus tinctoria grown in isolation, each having different growing stage, were selected and the surface area of their roots, stems and leaves was determined. Each of the roots of more than 0.2mm in diameter and stems was cut at intervals of 10cm and their surface area was calculated with 2$\pi$rl from the average diameter (2r) of both sections (upper and lower) by making cylindrical estimation of the cut pieces. The leaf area measured was only one side area, and the volume of cut piece and amount of dry matter of each organ were also measured. The percentage to the surface area of the whole plant body by each organ was 4-12% in root, 7-9% in stem and 69-89% in leaf, respectively. There was relatively a little individual difference. However, the surface area ratios of root and stem showed a slightly increasing tendency while that of leaf decreasing according to the growing stage. The ratio of sum leaf area index (LAIi) was 2.3-4.0$m^2$/$m^2$-and that of the surface area index(SaIi) was 0.16-0.33$m^2$/$m^2$, respectively. It has been known that the stem surface area(SAI) to the leaf area index(LAI) is within the range of 31-53%, but the SAIi is within the range of 8-11% of the LAIi.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.81-87
• /
• 2000

A variable cutting speed control model was developed to be implemented for the flexible disk grinding process Control algorithm was based on the error referred by the discrepancy between current disk angle and intended one that are pro-posed to produce desired resulting depth of cut. Controller was implemented in two different aspect One was to initiate the control law from the beginning while the other was to activate as soon as the disk start to produce ground surface i.e. The beginning of the between edges stage. Several performance analysis were conducted comparing various process parameters such as cutting force disk angle depth of cut and disk speed with respect to process transition time Tentative results revealed that controller implemented from the earlier stages of the process showed better performance than the other revealed that controller implemented from the earlier stages of the process showed better performance that the other.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.140-144
• /
• 2000

Laser cutting of thick diamond films is studied using a low-power(10 W) copper vapor laser. Due to the existence of the saturation depth in laser cutting, thick diamond films are not easily cut by low-power lasers. In this study, we have adopted a low thermalconductivity underlayer of alumina and a heating stage (up to 500$^{\circ}C$ in air) to prevent the laser energy from consuming-out and, in turn, enhance the cutting efficiency. Aspect ratio increases twice fromm 3.5 to 7 when the alumina underlayer used. Adopting a heating stage also increases aspect ratio and more than 10 is obtained at higher temperatures than 400$^{\circ}C$. These results show that thick diamond films can be cut, with low-power lasers, simply by modifying the thermal property of underlayer.