• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.5
• /
• pp.48-58
• /
• 2003

This study was carried out to select proper species for early stage replantation in granite forest road cut-slope. From one to thirteen year elapsed forest roads in five regional areas of Chungcheong-do and Kyungsangbuk-do, sample plots were selected, and their vegetations and environmental factors were investigated. Soil organic matter, total nitrogen, soil moisture content, and bulk density in the granite weathering soils were below 0.5%, 0.02%, 10%, and above 1.2g/$cm^3$, respectively. The environmental factors affecting distribution of species in the granite forest road were the elapsed year, elevation, cut-slope aspect, and cut-slope. Sowing plants of Dactylis glomerata, Lolium perenne, and Eragrostis curvula were found in the early stage of forest road-cut. Annual herbs of Youngia denticulata, Erigeron annuus, etc. were found in the 2-3 years elasped forest road-cut. Perennial herbs of Artemisia princeps var. orientalis, Miscanthus sinensis, etc., parachute woody plants of Weigela subsessilis, Pinus densiflora, etc., and gravitative trees of Prunus sargentii, Lindera obtusiloba, Quercus sp., etc. were found in the forest road cut-slope after 3 years of road-cut. Leguma of Lespedeza cureata, Amorpha fruticosa, Lespedeza bicolor, Pueraria thunbergiana, Albizzia julibrissin, etc., herbs of Artemisia keiskeana, Artemisia princeps var. orientalis, Miscanthus sinensis, etc., and woody plants of Rubus crataegifolius, Weigela subsessilis, Zanthoxylum schinifolium, Pinus densiflora, etc. were considered as proper species for replantation in granite forest road cut-slope.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.89-95
• /
• 2011

This study was conducted to improve commercial quality of cut spray chrysanthemums 'Charming Eye' and 'Pink Pride' bred in Korea by foliar application of daminozide, suppressing excessive elongation of peduncle caused by high temperature in greenhouse. Applications were made at two floral-bud-developmental stages and concentrations used were 0, 500, 1000, and $2000mg{\cdot}L^{-1}$. As for 'Charming Eye', cut flower length, peduncle diameter, stem diameter, flower bud diameter, and the number of flower buds did not show any significant difference among all treatments including control. However, the suppressing effect of peduncle elongation, widening angle of flower cluster arrangement on apical part, and increasing parallel flower buds in stage I showed better than those in stage II regardless of daminozide concentration. As for 'Pink Pride', cut flower length, peduncle diameter, and stem diameter did not show any significant difference among all treatments including control but angle of flower cluster on apical part increased compared to control as daminozide was sprayed at stage I and II except $2,000mg{\cdot}L^{-1}$ daminozide-sprayed at stage II. The number of flower buds and flower bud diameter showed the greatest increment through $1,000mg{\cdot}L^{-1}$ daminozide-sprayed at stage I and did the least values as sprayed with $2,000mg{\cdot}L^{-1}$ daminozide at stage II. Daminozide also gradually reduced peduncle length in a concentration-dependant manner but elongation of peduncle foliar-sprayed at stage I showed the more suppressing effect than that at stage II. Increasing the number of parallel flower buds showed the best results when sprayed with $2,000mg{\cdot}L^{-1}$ at stage I. In conclusion, we recommended that foliar spraying with $500-1,000mg{\cdot}L^{-1}$ daminozide at stage I and foliar spraying with $1,000-2,000mg{\cdot}L^{-1}$ daminozide at stage I improved cut flower quality of 'Channing Eye' and 'Pink Pride', respectively.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.3
• /
• pp.151-156
• /
• 2010

The Objective of this study was to investigate the effect of ethylene exposure and silver thiosulfate (STS) on flower senescence and vase life of cut iris (Iris hollandica). Cut iris flowers were pretreated in 1 mM STS solution for 30 minutes and exposed to 0, $3mL{\cdot}L^{-1}$ethylene for 24 hours. The vase life of iris treated at a bud stage was showed day 4.2 by exposure to $3mL{\cdot}L^{-1}$ ethylene and day 4.6 by exposure to $0mL{\cdot}L^{-1}$ ethylene. The pulsing of STS increased vase life of iris treated at a half-open stage. But, the vase life of iris was not affected by exposure to ethylene. Therefore, iris flowers were not sensitive to ethylene exposure. Iris flowers harvested at a bud stage do not progress to fully open flowers and then show flower senescnce, the optimum harvest stage seems to be a stage when flowers are open to some degree.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.176-184
• /
• 2013

To investigate the performance of VOC separation, composite hollow fiber membrane was prepared which composed of poly (ether imide) support prepared by phase separation method and poly (dimethylsiloxane) coating active layer. The performances of the membranes for the application of recovery process in terms of their morphology, gas permeance test for $N_2$ and $O_2$ gases. Durability against benzene, toluene and xylene was also investigated. And permeation test for multi-component VOCS through the membrane with different feed concentration and stage-cut were investigated. Permeance of PEI supported membrane and the membranes coated with PDMS decreased from 45,000 GPU to 63 GPU and 49,450 to 30 GPU for $N_2$ and $O_2$, respectively. Recovery efficiency and concentration of VOCs in permeate increased with decreasing stage-cut. VOCs concentration in permeate proportionally increased with increasing feed concentration but concentration ratio and recovery efficiency showed any noticeable changes with feed concentration change.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.E1
• /
• pp.9-16
• /
• 2001

To evaluate the correct separation capacity of cascade impactor for liquid aerosol, theoretical and experimental calculations of 50% cut-off diameter(ECOD(sub)50) were performed. A recalculation method of original diameter for hemispheric liquid aerosol collected on casecad impactor is also proposed newly using fixation technique. Calculated values for theoretical (ECOD(sub)50) of 40stage cascade impactor are 20, 6.4, 2.8, and 1.4$\mu\textrm{m}$ at 1st- ,2nd-, 3rd- and 4th-stage, respectively. A good agreement between the result of theoretical (ECOD(sub)50) and that og experimental ones was obtained at Stage 2 and 3. On the other hand, relatively large differences were found at Stage 1 and 4. Fixation for liquid aerosols using ${\alpha}$-cyanoacrylate monomer was performed successfully. The orignal diameter of liquid aerosols collected on each stage was calculated. The maximum levels of number size distribution curves at each stage are 19.8, 6.5, 3.1 and 1.5 $\mu\textrm{m}$ at 1st-, 2nd-, 3rd- and 4th-stage, respectively. The distortion of separation capacity of cascade impactor due to the split, merger, disappearance, and evaporation of liquid aerosols in the fluid did not occur.

• Proceedings of the KSEE Conference
• /
• 2007.03a
• /
• pp.189-201
• /
• 2007

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.16-26
• /
• 2002

As the slope designs had simply followed some slope guidelines during 1960's∼1970's, of which the main purpose was to estimate earth work quantities in the feasibility stage, slope failures had been experienced in Korea Highways. Various site investigation methods for highway cut-slopes have been continuously developed, and major cut-slope failures caused by slope instability have rapidly reduced. The failure mode of recent cut-slope failures in highways during typhoon RUSA No.15. featured a debris flow in soil mass activated by flowing water. The study of the surface soil scour and the debris flow caused by heavy rainfall must be done to protect the cut-slope failures in the future

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.2
• /
• pp.132-138
• /
• 1993

Yield and plant constituent responses of forage sorghum cultivars have usually been compared in uniform defoliation management test. However the influence of harvest time on differential response of cultivars needs more precise definition. Therefore this study with sorghum-sorgo-sudan hybrid cv. NC+Sweet Leaf, and Super Su 22 and Sorghum-Sorghum hybrid cv. Pioneer 931 was carried out under two defoliation regimes, namely defoliation at heading stage of each variety and defoliation on the same calendar date in response to heading stage of early variety. The results are summarized as follows; 1. Three harvests were taken by early variety with 80 days and two harvests by late variety with 94 days from sowing to heading. 2. Dry matter and TDN yield tend to be higher when the plants are cut at ear emergence stage of late variety. 3. Crude protein content was similar for the same growth growth stage of 1st growth and 1st regrowth, and rather big different between varieties. 4. Considering only dry matter and TDN yield, it is recommendable to cut two times at ear emergence stage of late variety and also three times at ear emergence stage of early variety in view point of utilization period extension and distribution of forage products.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.6
• /
• pp.799-804
• /
• 1999

Particle collection characteristics of the MOUDI cascade impactor has been studied for coarse particles in the range of 2 to 20$mu extrm{m}$ in aerodynamic diameter. A vibrating orifice aerosol generator was empolyed to generate monodisperse test aerosols. The oleic acid and sodium chloride(NaCl) particles were used as test aerosols. Aluminum foil and Teflon filter were selected as impaction media. The sampling flow rate was changed from 25 to 35L/min. Particle collection efficiency for single stage was examined for liquid particles. The stage response was obtained experimentally for the cascade impactor composed of three stages and a backup filter. The results showed that most of particle collection efficiencies measured in this work are similar to the efficiency curves obtained by Marple et al.(1991). For particles less than cut-off size of the stage, the collection efficiencies of solid particles are similar to those of loquid particles. However, the collection efficiency of solid particles decreases with mereasing particle diameter for the particles greater than the actual cut-off size of the impactor. The particle collection efficiency increases with increasing sampling flow rate at the same particel size. However, the collection efficiency curves seem not to be greatly shifted with the flow rate. The stage responses obtained by direct measurements in this work are in good agreement with those derived from the collection efficiency curves for single stage.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.780-791
• /
• 1996

A hybrid image processing system which automatically distinguished lean tissues in the image of a complex beef cut surface and generated the lean tissue contour has been developed. Because of the in homegeneous distribution and fuzzy pattern of fat and lean tissue on the beef cut, conventional image segmentation and contour generation algorithm suffer from a heavy computing requirement, algorithm complexity and poor robustness. The proposed system utilizes an artificial neural network enhance the robustness of processing. The system is composed of pre-network , network and post-network processing stages. At the pre-network stage, gray level images of beef cuts were segmented and resized to be adequate to the network input. Features such as fat and bone were enhanced and the enhanced input image was converted tot he grid pattern image, whose grid was formed as 4 X4 pixel size. at the network stage, the normalized gray value of each grid image was taken as the network input. Th pre-trained network generated the grid image output of the isolated lean tissue. A training scheme of the network and the separating performance were presented and analyzed. The developed hybrid system showed the feasibility of the human like robust object segmentation and contour generation for the complex , fuzzy and irregular image.