• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1598-1603
• /
• 1994

A preliminary design procedure for a multi-stage axial compressor is developed, which is based on the stage-stacking method. It determines the flow coefficient which gives rise to the design conditions required such as pressure ratio, mass flow rate and rotational speed for a given specific mass flow rate at inlet to a compressor. With this flow coefficient, blade radii, every stage and compressor performance characterics such as stage pressure ratio, adiabatic efficiency etc. are calculated by stacking each stage performance characteristics. It is shown that there is an optimum number of stage which results in the maximum of compressor overall efficiency for a given specific mass flow rate at inlet to a compressor. A test design was tried for three different geometric design constraints, and comparison with a previous study shows that present procedure could be used reliably in determining the number of compressor stage in preliminary design stage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.2
• /
• pp.90-96
• /
• 1991

This experiment was carried out in order to estimate the recovery days of root and stubble to the days after cutting, and contribution of specific stubble weight on the regrowth was examined using the relationships between the dry weight of shoot and yield components, and regrowth parameters by the days after cutting. The varieties examined were Maprima, Manhattan, Tove, Peramo, Caliente, Tempo and P-2 grown under individual plant basis. The results are may be summarized as follows: 1. Dry weight of root and stubble were recovered up to 13.5 and 11 days after cutting, respectively. 2. Dry weight of shoot(regrowth parts+stubble) was affected significantly by the varieties, stages of regrowth and variety x stage of regrowth. 3. The variety with tiller weight type showed higher average productivity of shoot than those of the variety with tiller number type. 4. Absolute growth rate(AGR) of shoot was correlated significantly with regrowth parts, stubble, root and weight of a tiller at the early stage of regrowth(up to 12 days after cutting), and correlated with regrowth parts, stubble, weight of tiller and stubble area at the late stage of regrowth(up to 20 days after cutting). 5. Contribution of specific stubble weight to absolute growth rate of shoot was different between the stages of regrowth. Thus, regrowth parts per specific stubble weight(RP1SSbW) and weight of tiller per specific stubble weight(WT1SSbW) contributed to absolute growth rate of shoot at the early stage of regrowth, and efficiency of specific stubble weight(ESSbW), regrowth parts per specific stubble weight (RPISSbW) and weight of a tiller per specific stubble weight(WT1SSbW) contributed to absolute growth rate of shoot at the late stage of regrowth. 6. Regrowth utilization rate(RUR) was one of the useful regrowth parameter to indicate the regrowth potential of grasses.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.04a
• /
• pp.115.2-115
• /
• 1979

By employing a two-stage continuous culture system, some of important physiological parameters involved in cellulase bicsynthesis have been evalua-ted with an ultimate objective of detigning an op-timally controlled tellulase process. Volumetric and specific cellulase productivities obtained were 90 IU/liter/hr and 8IU/g biomass/hr respectively. The maximum specific enzyme productivity observed was 14.8 IU/g hiomass/hr. The optimal dilution rate in the second stage which corresponded to the maximum enzyme productivity was 0.026-0.028 hr$^{-1}$ , and the specific growth rate in the second stage ihat suported maximum specific enzyme productivity was equal to orslightly less than zero. The maintenance coefficients deter-mined for oxygen and for carbon source are M$_{o}$=0.85mmmole/g biomass/hr and M$_{c}$=0.14 mmole hexose/g bio mass/hr respectively. The yield constants determined are; Y(x/o) =32.3g biomass/mole oxygen, Y (x/c) =1.1g bio-mass/g carbon or 0.44g biomass/g hexose, Y(x/n) = 19.6g biomass/g nitrogen for the enzyme produc-tion stage and 12.5g biomass/g nitrogen for the cell growth stage.e.e.

• Reproductive and Developmental Biology
• /
• v.37 no.1
• /
• pp.17-22
• /
• 2013

Although assisted reproductive technology is very useful to develop novel and therapeutic biomaterials for reproduction, research on molecular mechanism of folliculogenesis in pig is not clear. Therefore, the alteration of gene expression during follicular development in pigs was examined in this study. The expression of folliculogenesis-related genes was quantified in preantral ($250{\sim}300{\mu}m$) and antral (> $300{\mu}m$ in diameter) follicles, and overall gene expression was evaluated by a genome-wide microarray. The microarray results showed that 219 genes were differentially expressed, and of those, 10 and 22 known genes showed higher and less expression at the preantral stage than at antral stages, respectively. Among them, the expression of NR0B1, PPARG, GATA4, and ANXA2 genes related to folliculogenesis was validated by quantitative real-time PCR analysis. The expression of PPARG and GATA4 genes were increased at antral stages, but a significantly stage-specific increase (p<0.05) was only detected in annexin A2 (ANXA2) in antral-stage follicles. The expression of NR0B1 genes was increased at preantral stage and these patterns of gene expression were comparable to the results obtained by microarray analysis. We propose that the systematical regulation of genes supporting specific follicle stage should be employed for improved in-vitro folliculognesis.

• Microbiology and Biotechnology Letters
• /
• v.2 no.1
• /
• pp.29-35
• /
• 1974

We have studied the applicability of the principles and inherent advantages of the two-stage dontinuous uclture technique to an enzyme process for the purpose of improving and optimizing the productivity of 3-ketosteroid-delta-1-dehydrogenase. By using a two-stage continuous culture system, the growth st ageand enzyme produdtion stage are separated. In each stage an optimal set of toperaing conditions was determined, and this was tested for feasibility for the period of 10 days. During this period, at least 70％ of the maximum enzyme productivity could be maintained. The important design parameters studied are: (1) optimal specific growth rate in the first stage which corresponds to the maximal cell productivity, (2) the optimal dilution rate in the second stage which in turn determines the size of second stage fermentor and the mean residence time of cells in the second stage, (3) cell concentration in both stages, add (4) the specific enzyme productivity and enzyme productivity of the second stage. In addition, by using two-stage continuous culture system we have been able to reduce or eliminate the effect of catabolite repression due to high medium concentration and the adverse effect of the solvent used to dissolve the inducer. We have found the balance between the opposing effects of induction and repression in the second stage judging from the observation that the enzyme productivity goes through a maximum.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.151-156
• /
• 2008

Numerical analyses of two-stage turbopump turbines were conducted. One of the candidates for the 1st rotor was selected based on the result of the numerical investigation. Besides, the effects of the stator height on the turbine performance were studied. Finally, the performance of the entire two-stage turbine was predicted by numerical calculation. The result showed that the two-stage turbine produces more specific power than a one-stage turbine.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.9
• /
• pp.4091-4094
• /
• 2014

Background: This study used the receiver operating characteristic curve (ROC) to analyze Surveillance, Epidemiology and End Results (SEER) bronchioaveolar carcinoma data to identify predictive models and potential disparity in outcomes. Materials and Methods: Socio-economic, staging and treatment factors were assessed. For the risk modeling, each factor was fitted by a Generalized Linear Model to predict cause specific survival. The area under the ROC was computed. Similar strata were combined to construct the most parsimonious models. A random sampling algorithm was used to estimate modeling errors. Risk of cause specific death was computed for the predictors for comparison. Results: There were 7,309 patients included in this study. The mean follow up time (S.D.) was 24.2 (20) months. Female patients outnumbered male ones 3:2. The mean (S.D.) age was 70.1 (10.6) years. Stage was the most predictive factor of outcome (ROC area of 0.76). After optimization, several strata were fused, with a comparable ROC area of 0.75. There was a 4% additional risk of death associated with lower county family income, African American race, rural residency and lower than 25% county college graduate. Radiotherapy had not been used in 2/3 of patients with stage III disease. Conclusions: There are socio-economic disparities in cause specific survival. Under-use of radiotherapy may have contributed to poor outcome. Improving education, access and rates of radiotherapy use may improve outcome.

• Journal of Chest Surgery
• /
• v.52 no.3
• /
• pp.131-140
• /
• 2019

Background: The purposes of this study were to evaluate the appropriateness of the stage migration of stage IIA non-small cell lung cancer (NSCLC) in the seventh edition of the tumor, node, and metastasis classification for lung cancer to stage IIB lung cancer in the eighth edition, and to identify prognostic factors in patients with eighth-edition stage IIB disease. Methods: Patients with eighth-edition stage IIB disease were subclassified into those with seventh-edition stage IIA disease and those with seventh-edition stage IIB disease, and their recurrence-free survival and disease-specific survival rates were compared. Risk factors for recurrence after curative resection were identified in all included patients. Results: Of 122 patients with eighth-edition stage IIB NSCLC, 101 (82.8%) had seventh-edition stage IIA disease and 21 (17.2%) had seventh-edition stage IIB disease. Nonsignificant differences were observed in the 5-year recurrence-free survival rate and the 5-year disease-specific survival rate between the patients with seventh-edition stage IIA disease and those with seventh-edition stage IIB disease. Visceral pleural invasion was a significant risk factor for recurrence in patients with eighth-edition stage IIB NSCLC. Conclusion: The stage migration from seventh-edition stage IIA NSCLC to eighth-edition stage IIB NSCLC was appropriate in terms of oncological outcomes. Visceral pleural invasion was the only prognostic factor in patients with eighth-edition stage IIB NSCLC.

• 한국균학회소식:학술대회논문집
• /
• 2015.05a
• /
• pp.23-23
• /
• 2015

Plasmodiophora brassicae is a major disease threat for Brassica oil and vegetable crop production worldwide. The causal agent is a Plasmodiophorid, which are obligate biotrophic plant-pathogenic protists in the Rhizarian kingdom. Although the Plasmodiophorids include other important agricultural pathogens such as Polymyxa betae, Spongospora subterranea, their biology remains poorly understood due to their intracellular biotrophic life style. I will present the assembled and annotated genome of P. brassicae, with insights into developmental stage-specific. We provide the first genomic data for pathogenic Rhizaria. The exploitation of the life stage specific transcripts will shed light in the understanding of the life cycle at a molecular basis, which will in the long run help to understand and control club root disease. Our data also fill an important gap for the understanding of the eukaryotic tree of life, since this is only the third genome of the eukaryotic kingdom of Rhizaria.

• Journal of Korean Society for Quality Management
• /
• v.47 no.4
• /
• pp.823-835
• /
• 2019

Purpose: This study deals with a production planning and scheduling problem to minimize the total weighted tardiness on hybrid flow shop with sets of non-identical parallel machines on stages, where parallel machines in the set are dedicated to perform specific subsets of jobs and sequence-dependent setup times are also considered. Methods: A two-stage approach, that applies MILP model in the 1st stage and dispatching rules in the 2nd stage, is proposed in this paper. The MILP model is used to assign jobs to a specific machine in order to equalize the workload of the machines at each stage, while new dispatching rules are proposed and applied to sequence jobs in the queue at each stage. Results: The proposed two-stage approach was implemented by using a commercial MILP solver and a commercial simulation software and a case study was developed based on the spark plug manufacturing process, which is an automotive component, and verified using the company's actual production history. The computational experiment shows that it can reduce the tardiness when used in conjunction with the dispatching rule. Conclusion: This proposed two-stage approach can be used for HFS systems with dedicated machines, which can be evaluated in terms of tardiness and makespan. The method is expected to be used for the aggregated production planning or shop floor-level production scheduling.