• 방사성폐기물학회지
• /
• 제10권1호
• /
• pp.37-43
• /
• 2012

IAEA 및 국내의 방사성물질 운반 관련 규정에 따라 중 저준위 방사성폐기물 드럼 8개를 운반할 수 있는 IP-2형 운반용기를 개발하였다. IP-2형 운반용기는 낙하시험 및 적층시험을 거친 후 내용물의 유실 또는 분산과 운반용기 외부표면에서의 방사선량률이 20 % 이상 증가할 수 있는 차폐능력의 상실이 없어야 한다. 본 연구의 목적은 적층시험조건에 대한 시험방법 및 절차를 수립하고 IP-2형 운반용기의 적층조건에 대한 구조적 건전성을 평가하는데 있다. 운반용기의 원형시험모델을 이용하여 운반용기 중량의 5배 하중으로 24시간 동안 압축하는 적층조건에 대한 시험 및 전산해석을 수행하였다. 적층시험 시 운반용기의 모서리기둥에서의 변형률 및 변위를 측정하였으며, 측정된 변형률 및 변위는 해석결과와 서로 일치하였다. 컨테이너 바닥부의 처짐량은 측정이 어렵기 때문에 전산해석 방법으로 구하였다. 모서리기둥의 최대 변위와 컨테이너 바닥의 최대 처짐은 법규에서 규정하는 허용치에 비하여 낮게 나타났다. 적층시험 전 후에는 운반용기의 외형치수, 차폐체 두께, 볼트토크 등을 측정하였으며, 그 값들을 비교분석한 결과 운반용기는 내용물의 유실 및 분산, 차폐체 두께의 감소가 나타나지 않았다. 따라서 적층시험조건에서 IP-2형 운반용기의 구조적 건전성이 입증되었다.

• Wind and Structures
• /
• 제39권3호
• /
• pp.191-205
• /
• 2024

To investigate the wind load characteristics of a large-span spherical shell structure, a rigid model pressure test was conducted in a wind tunnel laboratory. The study aimed to examine the impact of various external structures and internal stacking forms on the wind loads of a spherical shell structure in a practical engineering project. This project features two adjacent spherical structures, each spanning 130 m and standing 67 m tall. These two structures are connected by trestles and a transfer station. Variations in the shape factor and the integral force coefficient of the structure were compared and analyzed under different test cases. The results indicate that when two structures are arranged in series, with the adjacent structure positioned upstream, the shape factor of the structure is most affected, resulting in a significant reduction effect at the bottom of the windward surface. Compared to the external structure, the impact of various internal stacking forms on the shape factor of the structure is relatively weak. The adjacent structure significantly improves the wind resistance of the main structure. The integral force coefficient of the structure reaches its peak when internal stacking is full and is at its lowest when there is no internal stacking.

• 복합신소재구조학회 논문집
• /
• 제2권1호
• /
• pp.1-7
• /
• 2011

본 논문에서는 복합소재 방호울타리의 6가지 적층 단면에 대한 충돌시뮬레이션을 실시하여 최적 적층 단면을 결정하였다. 먼저 6가지 단면 형상에 대하여 설문 조사를 통하여 형상을 결정하였다. 결정된 보 단면에 대하여 6가지 적층설계를 하였다. 적층에는 CSM, DB, DBT, Roving 섬유를 사용하였다. LS-DYNA를 사용하여 수평 및 3:1 경사에 대한 복합소재 보를 모델링하였다. 직육면체 추 및 원통형 추를 사용하여 낙하 충돌 시뮬레이션을 실시하였다. 시뮬레이션결과를 비교 분석하여 최적 적층 단면을 도출하였다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.982-984
• /
• 2008

This paper suggests anon-isolated high-gain boost converter using voltage-stacking cell. The voltage gain can be increased by adjusting number of voltage-stacking cells and transformer turns-ratio. Test results with 1kW prototype converter show that the voltage gain is three or four times higher than conventional boost converter at unity transformer turns-ratio and about 90% of efficiency is recorded under full load condition.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.57-62
• /
• 1999

In order to fabricate a involute construction structure, the pattern design for prepreg stacking was developed. For obtaining the demanded strength in the circumferencial and axial direction of the involute construction and tile proper processablity of prepreg stacking, the shaped pattern method was established which has a calculated length suitable for stacking. We can obtain the involute construction with clean interface between laminated plies and suitable dimension by using pattern design method developed in this study. Test specimens with varied arc angle were designed to test the structural properties of involute construction. Tensile and compressive strength decreased with the increase of arc angle. Tensile modulus and compressive failure strain were calculated under the conditon of transformation of material properties successfully.

• 대한물리의학회지
• /
• 제11권4호
• /
• pp.55-64
• /
• 2016

PURPOSE: The aim of this study was to examine the effect of air stacking exercise on lung capacity, activities of daily living, and walking ability in elderly adults. METHODS: A total of 27 subjects were randomly assigned to an experimental group (EG=13) or a control group (CG=14). Subjects in the experimental group participated in an active pulmonary rehabilitation program. 5 days a week for 4 weeks. The active pulmonary rehabilitation program was composed of an air stacking exercise with an oral nasal mask and manually assisted coughing. Conventional pulmonary rehabilitation exercises, such as, cough exercise, deep breathing, and abdominal muscle strengthening exercises were performed by both groups. Pulmonary function parameters, peak cough flow (PCF), and oxygen saturation were measured and the 6-minute walk test and Korean version of the modified Barthel index (K-MBI) scores were applied. RESULTS: Significant intergroup differences were observed for forced expiratory volume in one second (FEV1) and forced vital capacity (FVC) results after intervention (p<.05), and for 6 minute walk test and PCF results after intervention and at 2-week follow-up visits (p<.05). Post hoc test results showed significant differences in K-MBI, 6-minute walk test, and FEV1 in the experimental group after intervention (p<.05). FVC values were significantly higher after intervention and at 2-week follow-up visits versus pre-intervention (p<.05). PCF values were also significantly higher after intervention and remained significantly higher at 2-week follow-up visits (p<.05). CONCLUSION: Air stacking exercise in elderly adults improves lung capacity and exercise tolerance.

• Communications for Statistical Applications and Methods
• /
• 제28권3호
• /
• pp.217-232
• /
• 2021

The Korea film industry has matured and the number of movie-watching per capita has reached the highest level in the world. Since then, movie industry growth rate is decreasing and even the total sales of movies per year slightly decreased in 2018. The number of moviegoers is the first factor of sales in movie industry and also an important factor influencing additional sales. Thus it is important to predict the number of movie audiences. In this study, we predict the cumulative number of audiences of films using stacking, an ensemble method. Stacking is a kind of ensemble method that combines all the algorithms used in the prediction. We use box office data from Korea Film Council and web comment data from Daum Movie (www.movie.daum.net). This paper describes the process of collecting and preprocessing of explanatory variables and explains regression models used in stacking. Final stacking model outperforms in the prediction of test set in terms of RMSE.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.210-220
• /
• 2001

This paper aims at the evaluation on the characterization of CFRP laminate plates using falling weight impact tester. The experimentation was conducted on several laminates of different fiber and ply orientation. A system was built for the impact strength of CFRP laminates in consideration of stress wave propagation with using drop-weight impact tester as one of impact test. Absorbed energy of orthotropic composites with using T300 fiber, which are composed of the same fiber and stacking number is higher than that or quasi-isotropic specimen over impact energy 7J, but in case or using T700 fiber, much difference does not show. Also, absorbed energy of orthotropic composites with using T300 fiber, which are composed or stacking number and orientation became more than that of T700 fiber specimen; however great change doesn't show in case of quasi-isotropic specimens. It is found that influence was confirmed between impact energy and absorbed energy as the impact energy is increased with adding the falling weight.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.222-235
• /
• 2017

In this study, finite element modeling was used to predict the material properties of tri-axially braided textile composite. The model was made based on an experimental test specimen which was also used to compare the final results. The full interlacing of tows was geometrically modelled, from which repeating parts that make up the whole braid called unit cells were identified based on the geometric and mechanical property periodicity. In order to simulate the repeating nature of the unit cell, periodic boundary conditions were applied. For validation of the method, a reference model was analyzed for which a very good agreement was obtained. Material property calculation was done by simulating uniaxial and pure shear tests on the unit cell. The comparison of these results with that of experimental test results showed an excellent agreement. Finally, parametric study on the effect of number of plies, stacking type (symmetric/anti-symmetric) and stacking phase shift was conducted.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1598-1603
• /
• 1994

A preliminary design procedure for a multi-stage axial compressor is developed, which is based on the stage-stacking method. It determines the flow coefficient which gives rise to the design conditions required such as pressure ratio, mass flow rate and rotational speed for a given specific mass flow rate at inlet to a compressor. With this flow coefficient, blade radii, every stage and compressor performance characterics such as stage pressure ratio, adiabatic efficiency etc. are calculated by stacking each stage performance characteristics. It is shown that there is an optimum number of stage which results in the maximum of compressor overall efficiency for a given specific mass flow rate at inlet to a compressor. A test design was tried for three different geometric design constraints, and comparison with a previous study shows that present procedure could be used reliably in determining the number of compressor stage in preliminary design stage.