• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.99-103
• /
• 2002

It is the basic requirement of product characteristics to specify geometric dimensions and tolerances during design process of parts assembly. Therefore, there are many tolerance stack analysis method to explain tolerance zone. Tolerance stack analysis is to calculate gap using tolerances which includes geometric and coordinate dimension. In this study, we compared several different stack analysis method and try to suggest more general method called the Virtual Method to analyze tolerance stack.

• 한국주거학회논문집
• /
• 제13권4호
• /
• pp.61-66
• /
• 2002

The objectives of this study are to clarify the impacts of stack effect in high-rise residential buildings and to present technical methods to reduce stack effect. For the evaluation of stack effect, architectural design guidelines were used and computer program simulations based on network model were performed. The evaluation shows that problems due to stack effect may be reduced by appropriate architectural designs, such as increase in air-tightness of building envelop, and provision of vestibules around entrance and elevator hall doors.

• 설비공학논문집
• /
• 제27권3호
• /
• pp.152-157
• /
• 2015

Stack effect on high-rise building have negative effect on living environment, energy and life-safety aspect. Thus, it's necessary to find the measure to reduce the stack effect. As a result of field test on a 31-story building, a circulating type stack effect reduction technology was developed, which supplies air in the low stairs and discharges air in the high stairs. To evaluate the performance of this circulating type stack effect reduction technology on building stairs, a 3D numerical analysis was carried out by using Momentum Loss Model for analyzing leakage flow between compartments in a building. Consequently, numerical analysis proved that the stack effect on building stairs was reduced by a circulating type stack effect reduction technology.

• 한국정보과학회논문지:시스템및이론
• /
• 제35권1호
• /
• pp.53-59
• /
• 2008

무선 센서 네트워크의 발달에 따라 그 응용분야는 점점 더 복잡해져 가고 있음에도 불구하고, 대부분의 센서 노드 플랫폼은 여전히 심각한 자원 제약을 가지고 있다. 특히 적은 메모리 공간과 메모리 관리 유닛(MMU)의 부재는 스레드의 스택 관리에 있어 메모리 공간 낭비, 스택 오버플로우와 같은 문제를 야기해왔다. 이에 다 수의 스레드가 하나의 스택을 공유 함으로써 기존의 고정 크기 스택에 의해 낭비되는 메모리의 양을 최소화 시킬 수 있는 공유 스택 기법이 제안되었다. 본 논문에서는, 고정 크기 스택기법과 공유 스택 기법의 수학적 분석 모델을 제시하였다. 그 모델을 바탕으로 각각의 스택 오버플로우 확률을 계산하고 공유 스택 기법이 고정 크기 스택보다 더 안정적임을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.66-68
• /
• 2014

The paper deals with the vibration characteristics of the stack transducers made of piezoelectric discs with different radius. Natural frequencies of the stack transducers were evaluated by finite-element analysis. The natural frequencies of the analysis results were compared with those of each piezoelectric disc, and their relations were investigated.

• Design & Manufacturing
• /
• 제1권1호
• /
• pp.33-37
• /
• 2007

In recent, the demand of high-productivity injection mold increases because of the growth of international packaging market. The increase of productivity leads to the large-sized injection molding machine and peripheral devices. For solving this problem, the stack mold which is based on the existing machine and device is studied in advanced countries actively. In this study, as the preliminary research of stack mold development, the stack mold which has 2 Level ${\times}4$ Cavity is designed and manufactured. Besides, the motion and structural analysis are executed to verify the stability of developed stack mold.

• 한국시뮬레이션학회논문지
• /
• 제27권3호
• /
• pp.65-73
• /
• 2018

본 논문에서는 시뮬레이션 분석 과정의 복잡성을 줄이고 시뮬레이션 다량 수행을 가능토록 하기 위해 Elastic Stack 기술을 이용한 시뮬레이션 결과 분석 환경을 제안한다. 제안된 Elastic Stack 기반 시뮬레이션 결과 분석 환경은 물리적으로 떨어진 다양한 자원 상에서 수행되고 있는 시뮬레이션의 결과들을 중앙의 분석 서버로 자동 전송하고, 전송된 데이터들을 일괄적으로 관리하여 일련의 처리 및 분석 작업이 쉽게 적용될 수 있도록 지원하며, 다양한 가시화를 제공하는 서비스를 연결하여 분석 결과를 게시하는 과정을 손쉽게 구성할 수 있도록 지원한다. 또한, 각 서비스를 네트워크를 이용한 느슨한 연결 상태로 수행할 수 있어 확장성(scalability)을 제공한다. 제안된 시뮬레이션 결과 분석 환경의 유용성을 확인하기 위해 전염병 확산 시뮬레이션을 수행하고 별도의 분리된 서버에서 이에 대한 일련의 분석이 진행되는 과정을 보인다.

• 품질경영학회지
• /
• 제22권4호
• /
• pp.79-101
• /
• 1994

In modern manufacturing, a product consists of many components created by different processes. Variations in the individual component dimensions and in the processes may result in unacceptable final assemblies. Thus, engineers have increased pressure to properly set tolerance specifications for individual components and to control manufacturing processes. When a proper variation stack-up analysis is not performed for all of the components in a functional system, all component parts can be within specifications, but the final assembly may not be functional. Thus, in order to improve the performance of the final assembly, a proper variation stack-up analysis is essential for specifying dimensional tolerances and process control. This research provides a detailed case example of the use of variation stack-up analysis using a Monte Carlo simulation method to improve the defect rate of a complex process, which is the commutator brush track undercut process of an armature assembly of a small motor. Variations in individual component dimensions and process mean shifts cause high defect rate, Since some dimensional characteristics have non-normal distributions and the stack-up function is non-linear, the Monte Carlo simulation method is used.

• 한국수소및신에너지학회논문집
• /
• 제34권5호
• /
• pp.465-477
• /
• 2023

In proton exchange membrane fuel cell (PEMFC), proper thermal management of the stack and moisture generation by electrochemical reactions significantly affect fuel cell performance. In this study, the PEMFC dynamic characteristic model was developed through Simcenter AMESim, a development program. In addition, the developed model aims to understand the thermal resin balance of the stack and performance characteristics for input loads. The developed model applies the thermal management model of the stack and the moisture content and permeability model to simulate voltage loss and stack thermal behavior precisely. This study extended the C based AMESet (adaptive modeling environment submodeling tool) to simulate electrochemical reactions inside the stack. Fuel cell model of AMESet was liberalized with AMESim and then integrated with the balance of plant (BOP) model and analyzed. And It is intended to be used in component design through BOP analysis. The resistance loss of the stack and thermal behavior characteristics were predicted, and the impact of stack performance and efficiency was evaluated.

• 대한산업공학회지
• /
• 제31권1호
• /
• pp.36-43
• /
• 2005

It is the basic requirement of design process of parts assembly to specify geometric dimensions and tolerances of product characteristics. Among them, tolerance stack analysis is one of the important methods to specify tolerance zone. Tolerance stack analysis is to calculate gap using tolerances which includes geometric and coordinate dimensions. In this study, we suggested more general method called the virtual method to analyze tolerance stack. In virtual method, tolerance zone is formed by combination of dimensional tolerance, geometric tolerance and bonus tolerance. Also tolerance zone is classified by virtual boundary condition and resultant boundary condition. So gap can be defined by combination of virtual boundary and/or resultant boundary. Several examples are used to show the effectiveness of new method comparing to other methods.