• Ocean and Polar Research
• /
• v.37 no.4
• /
• pp.327-332
• /
• 2015

Isotopic compositions of ice and meltwater play a very crucial role in paleoclimate studies based on ice cores and water resources research conducted in alpine hydrogeology. Better understanding of variations in the stable isotopic compositions of water is required since changes from ice to liquid water are gaining more attention due to recent climate change. In this work, a melting experiment was designed and conducted to investigate how the isotopic compositions of ice vary with time by heat sources, such as solar radiation. We conducted the melting experiment for 22 hours. The discharge rate rose to a maximum value after 258 minutes and gradually declined because we fixed the heat source. The isotopic compositions of meltwater increased linearly or to a second degree polynomial. The linear relationship between oxygen and hydrogen has a slope of 6.8, which is less than that of the Global Meteoric Water Line (8) and higher than a theoretical value (6.3). The deuterium excess decreased when ${\delta}D$ or ${\delta}^{18}O$ increases or vise versa since the slope of the relationship for ice-liquid exchange is less than 8. These findings and the apparatus of the melting experiments will make a helpful contribution to the studies of stable isotopes and the melting process in temperate and polar regions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.100-111
• /
• 2003

The HAUSAT-1(Hankuk Aviation University SATellite-1) will orbit at the altitude of 650km-800 km with 65 or 98 degree inclination angle. The effects of magnetic field and Earth gravity are more predominant than other space disturbances because the HAUSAT-1 will be positioned in LEO(Low Earth Orbit). The HAUSAT-1 design implements a magnetic control system and gravity-stable system which implement the solar panel deployment system. The simulation using MATLAB was performed to make sure the attitude stability of HAUSAT-1, which is based on the 8th order magnetic field model and non-linear equations of disturbances and the HAUSAT-1 attitude. The stability is investigated for two different HAUSAT-1 configurations and attitude which are affected by disturbances through simulation. The results for gravity-gradient stable and non gravity-gradient stable system are compared. Methodology of attitude stabilization was explored to develop an effective attitude control system for the HAUSAT-1 using magnetic torquers.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.269-276
• /
• 2017

"Tracking" here refers to the estimation of a moving object with some degree of accuracy where at least one measurement is given. The measurement, which is the sensor-obtained output, contains systemic errors and errors that are due to the surrounding environment. Tracking filters play the key role of the target-state estimation after the updating of the tracking system; therefore, the type of filter that is used for the conduction of the estimations is crucial in the determining of the reliability of the updated value, and this is especially true since the performances of different filters vary when they are subjected to different environmental and initial conditions. The purpose of this paper is the conduction of a comparison between the performances of the ${\alpha}-{\beta}-{\gamma}$ filter and the Kalman filter regarding an ARPA-system tracking module that is used on board high-dynamic warships. The comparison is based on the capability of each filter to reduce noise and maintain a stable response. The residual error is computed from the difference between the true and predicted positions and the true and estimated positions for the given sample. The results indicate that the tracking accuracy of the Kalman filter is higher compared with that of the optimal ${\alpha}-{\beta}-{\gamma}$ filter; however, the response of the optimal ${\alpha}-{\beta}-{\gamma}$ filter is more stable.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.4
• /
• pp.261-268
• /
• 2020

Objective: This study was conducted to provide basic data on physical function improvement activities of elderly care facilities by identifying the degree of physical improvement activities of elderly caregivers. Design: Descriptive correlational study. Methods: The instrument of this study consisted of 12 questions on the general characteristics of the subject. For the assessment of improvement in physical function activities, the measuring tool used for the elderly consisted of a total of 20 questions. For data analysis, Pearson's correlation coefficient & Spearman's rho and multiple regression were used. Results: The higher the age of the subjects, the lower their educational background (r=-0.273, p<0.05), and the higher the probability of having a religion (r=-0.258, p<0.05), the more stable the employment type (r=-0.333, p<0.05). The higher the level of education, the higher the monthly income (r=0.187, p<0.01), and the shorter the career (r=-0.204, p<0.05). The more stable employment, the more unstable duty (r=-0.245, p<0.05), and the more unstable work, the higher the monthly income (r=-0.206, p<0.05) and the longer the career, the higher the monthly income (r=0.247, p<0.05). The more stable the employment, the more activities to improve physical function were found (r=0.341, p<0.05), and the more unstable the duty, the more activities to improve physical function were found (r=0.321, p<0.05), and the higher monthly income, the less physical function improvement activities (r=-0.196, p<0.05). Conclusions: It is necessary to provide regular services by a dedicated physical therapist for physical function improvement activities in order to improve the quality of life of the elderly in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.106-106
• /
• 2015

The information of flow regimes continues to be norm in water resource and watershed management, in that stream flow regime is a crucial factor influencing water quality, geomorphology, and the community structure of stream biota. The objectives of this study were to estimate Korean stream flows from landscape variables, classify stream flow gages using hydraulic characteristics, and then apply these methods to ungaged biological monitoring sites for effective ecological assessment. Here I used a linear modeling approach (MLR, PCA, and PCR) to describe and predict seasonal flow statistics from landscape variables. MLR models were successfully built for a range of exceedance discharges and time frames (annual, January, May, July, and October), and these models explained a high degree of the observed variation with r squares ranging from 0.555 (Q95 in January) to 0.899 (Q05 in July). In validation testing, predicted and observed exceedance discharges were all significantly correlated (p<0.01) and for most models no significant difference was found between predicted and observed values (Paired samples T-test; p>0.05). I classified Korean stream flow regimes with respect to hydraulic and hydrologic regime into four categories: flashier and higher-powered (F-HP), flashier and lower-powered (F-LP), more stable and higher-powered (S-HP), and more stable and lower-powered (S-LP). These four categories of Korean streams were related to with the characteristics of environmental variables, such as catchment size, site slope, stream order, and land use patterns. I then applied the models at 684 ungaged biological sampling sites used in the National Aquatic Ecological Monitoring Program in order to classify them with respect to basic hydrologic characteristics and similarity to the government's array of hydrologic gauging stations. Flashier-lower powered sites appeared to be relatively over-represented and more stable-higher powered sites under-represented in the bioassessment data sets.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.2
• /
• pp.143-151
• /
• 2012

Purpose: The present study was conducted to investigate whether there is any difference in the centration of spherical RGP lens on cornea according to corneal types, corneal astigmatism and lens fitting states. Methods: Spherical RGP lens was fitted on 29 eyes of round-typed cornea and 45 eyes of symmetric bowtie-typed cornea with 0.00~2.75 D of corneal astigmatism in alignment, steep or flat. Their lens centrations on cornea were analyzed by taking photographs. Results: The centration of spherical RGP lens in the vertical direction was decentrated to downward direction in all cases, and the degree of decentration was not consistent. The lens centration in horizontal direction was significantly more-decentrated to the temporal meridian as base curve of lens was increased, and the degree of decentration was different according to the corneal type, corneal astigmatism and fitting states. With the same degree of astigmatism, the lens decentration to the temporal meridian was bigger in round-typed cornea than that in symmetirc bowtie-typed cornea. Conclusions: The centration of spherical RGP lens varies depending on lens fitting states, corneal astigmatism, and corneal types. Thus, the consideration of these factors may improve the success rate in RGP lens prescription.

• Korean Journal of Environmental Biology
• /
• v.25 no.1
• /
• pp.56-65
• /
• 2007

The aim of this study is to provide a fundamental data which can be applied to management conservation, and restoration of coastal sand dune vegetation by determining the classification and distribution of community, and ecological characteristics of the habitat. This research was performed by the Braun-Blanquet's method. The coastal sand dune vegetation of Uido (I.) was composed with 9 communities as follows : Vitex rotundifolia community, Zoysia macrostachya community, Carex kobomugi community, Iachaemum anthephoroides community, Imperata cylindrica var. koenigii community, Carex pumila community, Calystegia soldanella community Messerschmidia sibirica community and Pinus thunbergii community, the evergreen needle-leaved forest. The constancy degree showed high in Calystegia soldanella (77%), Vitex rotundifolia (74%), Carex kobomugi (66%), Zoysia macrostachya (50%) and Imperata cylindrica var. koenigii (47%). However the highest constancy degree Calystegia soldanella has, it turned out to have low net contribution degree (NCD) in each community. In terms of the distribution and growth feature of the composition species in the coastal sand dune, Vitex rotundifolia, Carex kobomuri and Zoysia macrostachya were widely distributed from unstable sand dune to stable one but Iachaemum anthephoroides and Imperata cylindrica var. koenigii were mainly found at the stable sand dune. Carex kobomugi was especially dominant at the unstable sand dune where the sand continued to be deposited. On the other hand, Carer pumila and Messerschmidia sibirica showed regional distributions around fresh water.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.21-30
• /
• 2008

In this study, to evaluate the aerodynamic stability of suspension bridge hanger ropes, the wind tunnel tests are carried out. It is found that the vortex induced vibration is detected only in single PE-coated PWS cable case. And the wake galloping is occurred in twin cables spaced $3\sim6$ cable diameters of cable center to center when the incidence angle of wind is only zero degree. In case of other incidence angles of wind except zero degree, the wake galloping or the wake flutter are showed in twin cables even outside range of the bounds of $3\sim6$ cable diameters. CFRC cable shows very stable for the twin cables regardless of the distance between two cables, and also for various incidence angles of wind. Thus the characteristic of CFRC rope overwhelms one of PWS cable in aerodynamic stability.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2119-2123
• /
• 2007

This study deals with performance characteristics of heat pipe combined with a solid-liquid phase change material(PCM). The outer diameter of the heat pipe was 9.5 mm and the total length was 600 mm, where the evaporator, the adiabatic section and the condenser lengths were equally 200 mm. A paraffin wax having a melting point of 58.5$^{\circ}C$ was used as PCM. The paraffin container was attached to the adiabatic section of the heat pipe. The paraffin container had outer diameter of 18 mm, wall thickness of 1.2 mm and the total length of 100 mm. The heat pipe was tested with tilt angle of horizontal degree and favorite angle 10 degree, with evaporator lower position to provide stable operation of the heat pipe. Input thermal load was varied from 40 W, with increment of 40 W, to above 100 W until the maximum temperature of the heat pipe wall reached 200$^{\circ}C$. Test results of the PCM heat pipe were presented in comparison with conventional heat pipe of the same basic dimensions. The performance was analyzed in terms of temperature distribution, thermal resistance and heat transport capability.

• Journal of Power System Engineering
• /
• v.16 no.3
• /
• pp.51-56
• /
• 2012

The effect of deformation induced martensite transformation on the mechanical properties in austenitic stainless steel with high Mn was studied. ${\alpha}$'-martensite was formed by deformation in austenitic stainless steel with high Mn. Deformation induced ${\alpha}$'-martensite was formed with surface relief by cold rolling. With the increase of deformation degree, volume fraction of deformation induced martensite was increased rapidly in early stage of deformation and then, increased slowly. With the increase of deformation degree, hardness and tensile strength were rapidly increased with linear relations, while elongation was rapidly decreased and then slowly decreased. Hardness, tensile strengths and elongation were influenced strongly by deformation induced martensite.