• 제목/요약/키워드: ss

검색결과 3,779건 처리시간 0.033초

Anticancer Activity of the Safflower Seeds (Carthamus tinctorius L.) through Inducing Cyclin D1 Proteasomal Degradation in Human Colorectal Cancer Cells

  • Park, Gwang Hun;Hong, Se Chul;Jeong, Jin Boo
    • 한국자원식물학회지
    • /
    • 제29권3호
    • /
    • pp.297-304
    • /
    • 2016
  • The seed of safflower (Carthamus tinctorius L) has been reported to suppress human cancer cell proliferation. However, the mechanisms by which safflower seed inhibits cancer cell proliferation have remained nuclear. In this study, the inhibitory effect of the safflower seed (SS) on the proliferation of human colorectal cancer cells and the potential mechanism of action were examined. SS inhibited markedly the proliferation of human colorectal cancer cells (HCT116, SW480, LoVo and HT-29). In addition, SS suppressed the proliferation of human breast cancer cells (MDA-MB-231 and MCF-7). SS treatment decreased cyclin D1 protein level in human colorectal cancer cells and breast cancer cells. But, SS-mediated downregulated mRNA level of cyclin D1 was not observed. Inhibition of proteasomal degradation by MG132 attenuated cyclin D1 downregulation by SS and the half-life of cyclin D1 was decreased in SS-treated cells. In addition, SS increased cyclin D1 phosphorylation at threonine-286 and a point mutation of threonine-286 to alanine attenuated SS-mediated cyclin D1 degradation. Inhibition of ERK1/2 by PD98059 suppressed cyclin D1 phosphorylation and downregulation of cyclin D1 by SS. In conclusion, SS has anti-proliferative activity by inducing cyclin D1 proteasomal degradation through ERK1/2-dependent threonine-286 phosphorylation of cyclin D1. These findings suggest that possibly its extract could be used for treating colorectal cancer.

페이딩 디스퍼시브 채널에서 DS/SS DPSK 통신 시스템의 성능 분석 (Performacne Analysis of DS/SS DPSK Communication Systems over Fading Dispersive Channels)

  • 김기준;강병권;황금찬
    • 한국통신학회논문지
    • /
    • 제18권7호
    • /
    • pp.959-969
    • /
    • 1993
  • 본 논문에서는 페이딩 디스퍼시브 채널에서 시간 및 주락수축상에서의 확산 현상을 고려하여 DS/SS DPSK 통신 시스템의 성능을 분석하었다. WSSUS 채널 모델을 이용하여 채널의 시간과 주파수축상의확산 현상의 정도를 각각 다중 경로 확산량과 도플러 확산량으로 표현하고, DS/SS DPSK 통신의 오율을 채널과 시스템의 파라메터에 대한 식으로 유도하였다. 또한, 계산을 보다 간단히 하기 위하여 주파수축 확산 현상에 대하여 근사적 계산 방법을 제시하고, 이 근사화식을 이용하여 레일리 및 라이시안 페이딩 채널에서 DS/SS DPSK통신 시스템의 오율 특성을 칩 수의 변화에 따라 비교분석하였다.

  • PDF

Temperature-dependent tendency of target DNA translocation through a nanocapillary functionalized with probe DNA

  • Lee, Choongman;Youn, Yeoan;Kim, Joo Hyung;Yoo, Kyung-Hwa
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.140.1-140.1
    • /
    • 2016
  • We have measured DNA translocation through a nanocapillary functionalized with probe DNA. These DNA-functionalized nanocapillaries selectively facilitate the translocation of target ssDNAs that are complementary to the probe ssDNAs. In addition, translocation of the complementary target ssDNA exhibits two tendencies to translocation speed, such as fast and slow translocation, whereas that of non-complementary target ssDNA yields only one tendency, fast translocation. These observations suggest that the complementary and non-complementary target ssDNAs may be discriminated due to different interaction strengths between target and probe ssDNAs. The temperature dependence measurements of DNA translocation show that slow translocation events are ascribed to the complementary interaction between probe and target ssDNA. This confirms that their dwell time is dependent on the base-pair binding strength. These results demonstrate that mere single-base different target DNA can be selectively detectable by using the probe DNA-functionalized nanocapillaries.

  • PDF

층상복합판재의 피로파괴거동에 관한 연구 (A study on the fatigue fracture behavior of laminated composites)

  • 권영준;신창균
    • 대한기계학회논문집
    • /
    • 제12권4호
    • /
    • pp.755-759
    • /
    • 1988
  • Laminated Composites, SS41-Cu-SS41 plates are made by brazing bonding and hot bonding process. Fatigue repeated plane bending tests are carried out and the fracture behavior of Laminated composites, SS41-Cu-SS41 plates are compared with that of homogeneous steel, SS41plates. The following results are obtained; (1) The fatigue life of the brazing bonding plates is higher than those of SS41 plates and hot bonding plates under high stress. (2) The relations between the fatigue crack growth rate, da/dN and stress intensity factor are, da/dN=4.7*10$^{-10}$ $K^{3.20}$, for SS41 da/dN=7.8*10$^{-9}$ $K^{2.43}$, for CAH da/dN=3.6*10$^{-9}$ $K^{2.54}$, for CAB da/dN=1.58*10$^{-9}$ $K^{2.94}$ , for PAH da/dN=1.23*10$^{-9}$ $K^{2.69}$, for PAB

Calculation Of Mobile Location Based On TOA/SS Measurements

  • Huang, Jiyan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제6권12호
    • /
    • pp.3166-3181
    • /
    • 2012
  • Localization of mobile station (MS) has now gained considerable attention. Since the hybrid measurements can help to improve the positioning accuracy, several hybrid localization methods have been proposed in the literature. However, the high performance estimator with the closed-form solution and complete performance analysis for time-of-arrival/signal strength (TOA/SS) localization technique is still an opening issue. Two TOA/SS localization algorithms with the closed-form solutions are proposed for the cases with or without uncertainty in the positions of base stations. Furthermore, performance analysis for the TOA/SS localization technique is presented. Both the theoretical variances and Cramer-Rao lower bounds (CRLBs) are derived and the relationship between the cases with or without uncertainty is given. The paper also proves that the TOA/SS scheme has a lower CRLB than the TOA (or SS) scheme. Theoretical analysis and simulations show that the proposed method can reach its CRLB.

Comparison of oxide layers formed on the low-cycle fatigue crack surfaces of Alloy 690 and 316 SS tested in a simulated PWR environment

  • Chen, Junjie;Nurrochman, Andrieanto;Hong, Jong-Dae;Kim, Tae Soon;Jang, Changheui;Yi, Yongsun
    • Nuclear Engineering and Technology
    • /
    • 제51권2호
    • /
    • pp.479-489
    • /
    • 2019
  • Low-cycle fatigue (LCF) tests were performed for Alloy 690 and 316 SS in a simulated pressurized water reactor (PWR) environment. Alloy 690 showed about twice longer LCF life than 316 SS at the test condition of 0.4% amplitude at strain rate of 0.004%/s. Observation of the oxide layers formed on the fatigue crack surface showed that Cr and Ni rich oxide was formed for Alloy 690, while Fe and Cr rich oxide for 316 SS as an inner layer. Electrochemical analysis revealed that the oxide layers formed on the LCF crack surface of Alloy 690 had higher impedance and less defect density than those of 316 SS, which resulted in longer LCF life of Alloy 690 than 316 SS in a simulated PWR environment.

이성과 실존 사이에서 자기의식의 문제: 하이데거의 현존재 분석론, 아펠의 담론적 이성 이론, 그리고 에벨링의 저항의식 이론에서칸트의 자기의식 이론에 대한 변형들을 중심으로 (Das Problem des Selbstbewußtseins Zwischen Vernunft und Existenz: Im Zentrum auf die Transformationen von Kants Selbstbewußtseinstheorie in Heideggers Analytik vom Dasein, Apels Lehre von diskursiver Vernunft, und Ebelings Lehre von Widerstandsbewußtsein)

  • 김정주
    • 철학연구
    • /
    • 제120호
    • /
    • pp.217-250
    • /
    • 2018
  • 주관 혹은 자기의식은 근대철학의 근본원리이다. 칸트에게 자기의식은 객관의식(통각의 종합적 통일)에서의 자기의식(명료한 자기관계로서 통각의 분석적 통일)이다. 이때 그는 자기의식의 반성 모델을 제시한다. 그러나 그는 객관의식을 선험적 인식론의 본래의 주제로 삼음으로써, 통각의 종합적 통일과 통각의 분석적 통일 사이의 필연적 연관성을 체계적으로 해명하지 못하고 있고, 또한 자기의식의 반성 구조에서 순환논증 및 무한반복의 이론내재적인 형식적 난제들을 해결하지 못하고 있다. 초기 하이데거는 기초존재론의 전제들 아래 칸트의 전통 의존적 주관성 이론은 존재망각의 징후들을 보여주고 있다고 비판하면서 칸트의 자기의식 이론을 변형하고, 이 변형된 칸트 이론을 눈앞의 존재에 대한 전통적 존재론의 주관성 이론적 정초로 해석한다. 그는 칸트의 자기촉발과 자기의식 이론에 대한 비판적 해석을 통해 현상학적 지평의식으로서의 자기의식의 모델을 시사한다. 그에겐 칸트의 '나는 사고한다'는 것은 시간 자체, 정확히 말해서 시간 자체의 한 양상인 현재화이다. 그리고 그의 전반성적이고 직접적인 자기관계의 모델에선, 주관의 사고하는 자기관계에서 나타나는 순환논증 및 무한반복의 난제들은 생기지 않는다. 아펠은 선험화용론에서 칸트의 자기의식적 통각 이론은 독아론적이라고 비판하면서, 칸트 이론의 선험철학적 타당성을 논증하는 인간들의 상호주관성의 차원에서 완성하고자 한다. 여기선 칸트의 통각 혹은 의식 일반은 담론적 이성이 기능하고 있는 의사소통공동체로 대체된다. 그런데 주관은 항상 타인들과의 관계를 통해서 자기관계를 가질 수 있고 또 자기와의 의사소통을 할 수 있다. 이처럼 주관의 자기의식 혹은 반성이 본질적으로 언어적으로 매개된 사회적 관계에 의존한다면, 주관의 사고하는 자기관계에서 나타나는 순환논증 및 무한반복은 문제시되지 않는다. 에벨링은 하이데거와 아펠의 칸트 변형들을 비판적으로 수용하면서 이성의 자기비판이라는 칸트의 선험철학적 관점에서 하이데거의 죽음 분석론과 아펠의 담론적 이성 이론을 통합하여, 보편적 죽음에 대한 저항의식의 기초화용론을 개진한다. 이 저항의식은 칸트의 자기의식에 대한 기초화용론적 변형이다. 이성의 저항의식은 독아론적 차원에 머물지 않고, 저항공동체 내에서 논증을 통해 보편화가능한 의식이다. 따라서 순환논증 및 무한반복은 문제시되지 않는다.

연속파 파이버 레이저를 이용한 SS400의 절단 특성에 관한 연구 (A Study on SS400 Cutting Characteristics using Continuous Wave Fiber Laser)

  • 오용석;이가람;박은경;유영태
    • 한국생산제조학회지
    • /
    • 제21권4호
    • /
    • pp.644-650
    • /
    • 2012
  • This paper show the 2kW fiber laser cutting properties of SS400. The study was comparison of traditional 4kW $CO_2$ Laser cutting and 2kW Fiber laser cutting characteristics for the application of Industrial 2D Laser Cutting Machine. The laser used in this investigation was an IPG YLU-2000 multi-mode Ytterbium Fiber machine with a maximum power of 2000W and a wave length of 1070 nm. The laser was used in its Continuous Wave (CW) mode with an approximately top hat beam intensity distribution. Fiber laser high quality cuts at a large range of speeds (ranging from 2000 to 3800 mm/min) which has been obtained for the 2.3mm Sheet of SS400. 2kW power Fiber laser cut was able to max. 20mm sheets of SS400 (speed range from 650 to 850 mm/min). Fiber laser cutting used in conventional hole nozzle could cut 12mm SS400 but used in special dual cutting nozzle could cut 20mm SS400.

Ti(Al,O)/$Al_2O_3$ 플라즈마 코팅한 SS41의 고온산화 거동 (High Temperature Oxidation Behavior of Plasma-sprayed Ti(Al,O)/$Al_2O_3$ Coatings on SS41 Steel)

  • 최갑송;우기도;이현범;전재열
    • 열처리공학회지
    • /
    • 제20권5호
    • /
    • pp.231-236
    • /
    • 2007
  • High velocity oxy-fuel (HVOF) spraying was used to coat Ti(Al,O)/$Al_2O_3$ powder onto the SS41 steel plate. Macrostructure of the coated specimen has been investigated by scanning electron micrograph (SEM). High temperature oxidation behavior of the coated specimen and SS41 steel have been studied. From the results of SEM observation, Ti(Al,O)/$Al_2O_3$ powder was coated well onto the substrate SS41 steel. Porosity onto the coated layer was only 0.38%. The oxidation results showed that Ti(Al,O)/$Al_2O_3$ powder coated SS41 steel have improved little oxidation resistance at $900^{\circ}C$ in air, but improved remarkably oxidation resistance at $800^{\circ}C $ in air compare to the substrate SS41 steel.

SS/TDMA 위성 시스템의 중계기 설계 (A Study on The Design of Satellite Transponder for SS/TDMA systems)

  • 고성찬;신천식;유문희;최경수;이준원
    • 한국정보통신학회논문지
    • /
    • 제7권3호
    • /
    • pp.403-410
    • /
    • 2003
  • 현재 국내에서는 기저대역 처리에 소요되는 기술적 난이도와 개발에 수반되는 경제적 비용을 감안하여 MSM 스위치로 빔간의 상호연결뿐만아니라 Ku 대역과 Ka 대역간의 상호연결을 통해 위성 interactive 멀티미디어 서비스를 제공하는 SS/TDMA 위성 시스템에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 이를 위한 SS/TDMA 위성시스템의 중계기 구조를 도출하고 분석한다.