• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.93-99
• /
• 2012

이 논문은 선박디젤엔진의 진동제어에 적용할 수 있는 MR 유체기반 마운트(MR 마운트)의 최적설계를 제시한다. 이 연구에서는 압착모드, 유동모드, 전단모드를 포함하는 혼합모드가 제안되었고 설계되었다. 효과적인 진동제어를 위하여 요구되는 MR 마운트의 작동 댐핑력을 결정하기 위하여 디젤엔진의 기진력이 분석되었다. 이 분석에서 V-type 엔진이 고려되었으며 피스톤의 토크에서의 속도와 가스압력간의 관계를 유도하였다. 결과적으로 상업적으로 이용 가능한 MR 유체의 장의존적 유동특성과 기진력을 통합함으로써 적절한 MR 마운트의 크기가 설계되었다. 게다가 기하학적 제한조건이 고려된 최대 구동력을 얻기 위해 ANSYS 를 이용하여 최적설계가 수행되었다. 자기밀도분석을 통해 바닥간격과 코일의 반지름과 같은 최적설계변수가 결정되었다.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2498-2508
• /
• 1993

$Al/SiC/Al_{2}O_{3}$ hybrid composites are fabricated by squeeze infiltration method. From the misconstructive of $Al/SiC/Al_{2}O_{3}$ hybrid composites fabricated by squeeze infiltration method, uniform distribution of reinforcements and good bondings are found. Hardness value of $Al/SiC/Al_{2}O_{3}$ hybrid composites increases linearly with the volume fraction of reinforcement because SiC whisker and $Al_{2}$O$_{3}$ fiber have an outstanding hardness. Optimal aging conditions are obtained by examining the hardness of $Al/SiC/Al_{2}O_{3}$ hybrid composites with different aging time. Tensile properties such as Young's modulus and ultimate tensile strength are improved up to 30% and 40% by the addition of reinforcements, respectively. Failure mode of $Al/SiC/Al_{2}O_{3}$ hybrid composites is ductile on microstructural level. Through the abrasive wear test and wear surface analysis, wear behaviour and mechanism of 6061 aluminum and $Al/SiC/Al_{2}O_{3}$ hybrid composites are characterized under various testing conditions. The addition of SiC whisker to $Al/SiC/Al_{2}O_{3}$ composites gives rise to improvement of the wear resistance. The wear resistance of $Al/SiC/Al_{2}O_{3}$ hybrid composites is superior to that of Al/SiC composites. The wear mechanism of aluminum alloy is mainly abrasive wear at low speed range and adhesive and melt wear at high speed range. In contrast, that of $Al/SiC/Al_{2}O_{3}$ hybrid composites is abrasive wear at all speed range, but severe wear when counter material is stainless steel. As the testing temperature increases, wear loss of aluminum alloy decreases because the matrix is getting more ductile, but that of $Al/SiC/Al_{2}O_{3}$ hybrid composites is hardly varied. Oil lubricant is more effective to reduce the wear loss of aluminum alloy and $Al/SiC/Al_{2}O_{3}$ hybrid composites at high speed range.

• 한국소음진동공학회논문집
• /
• 제23권3호
• /
• pp.209-217
• /
• 2013

이 논문은 선박용 디젤엔진의 진동제어에 적용할 수 있는 MR 유체기반 마운트(MR 마운트)의 최적설계를 제시한다. 이 연구에서는 압착모드, 유동모드, 전단모드를 포함하는 혼합모드가 제안되었고 설계되었다. 효과적인 진동제어를 위하여 요구되는 MR 마운트의 작동 댐핑력을 결정하기 위하여 디젤엔진의 기진력이 분석되었다. 이 분석에서 V-type엔진이 고려되었으며 피스톤의 토크에서의 속도와 가스압력간의 관계를 유도하였다. 결과적으로 상업적으로 이용 가능한 MR 유체의 장의존적 유동특성과 기진력을 통합함으로써 적절한 MR 마운트의 크기가 설계되었다. 게다가 기하학적 제한조건이 고려된 최대 구동력을 얻기 위해 ANSYS를 이용하여 최적설계가 수행되었다. 자기밀도분석을 통해 바닥간격과 코일의 반지름과 같은 최적설계변수가 결정되었다.

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.629-636
• /
• 2012

Volume shrinkage behavior accompanying the cure of resin formulations might be a critical factor when assembly processes using polymer materials are considered. In this study, cure shrinkage behavior with respect to resin formulation type and heating method was measured on sandwich structure samples by a thermomechanical analyzer (TMA). Quartz, used as a cover material for the sandwich structure, indicated the coefficient of thermal expansion close to $0ppm/^{\circ}C$. When a dynamic heating mode was conducted, a squeeze-out region and a cross-linking region for each resin formulation could be separated clearly with overlapping differential scanning calorimeter results on the TMA results. In addition, a cure shrinkage dominant region and a thermal expansion dominant region in the cross-linking region were distinguished. Consequently, the degree of cure at the initiation of the thermal expansion dominant region was successfully measured. Measurement of all resin formulations indicated the thermal expansion behavior exceeded cure shrinkage before full cure.

• 혜화의학회지
• /
• 제12권1호
• /
• pp.103-121
• /
• 2003

Human being can't live without nature, then the changes of nature affect human body. It means that human body has corresponding changes to the KI(vital energy) of nature. There is a stream of changes in human body which circulate mysteriously and punctually by the laws of nature. If this stream of changes fits into human's life style, it would be most effective. It has a certain mode continuously. So if a person has a habit fitting into it, he will get the healthiest body. Then the researcher tries to explain the changes in human body by the time, mainly focused on within 24 hours. it is showing not only the oriental view, but also the western's. The researcher can find the coincidence as followings. At In-Si(3-5 am), the body function and the body temperature get to the bottom, therefore it's good for him to wake up and to run the vital energy. At Sa-Si(9-11 am), the patience on pain anxiety and the psychic concentration get to the top, he'd better start the work. At O-Si(11am-1pm), the heart energy has a vital move, then the blood concentration of Hb(hemoglobin) gets to the top. At Mi-Si(1-3 pm), the muscle strength, the squeeze, and the breathing rate increase. The reflex nerve sensitivity gets to the top. Creativity, observation, and working efficiency go high, so it's time to work hard. At Hae-Si(9pm-1am), the body function falls, sleeping is needed. At Chuck-Si(1-3 am), the cell spontaneity gets to the top, immune lymphocyte moves actively, and the blood concentration of growth hormone gets to the top. These are liver's work. In west, there has been active studies on how to reduce the side effect by using a person's bio-rhythm based on the 'time treatment', and how to reorganize the bio-rhythm by using the machine and the age resistance based on the 'bio-watch'. Though the 'time treatment' means something, the artificial resistance on bio-rhythm seems to give bad effects to human body. If a person lives by regimen of oriental medicine, he will maintain the healthiest body. Regimen is that human body follows the laws of nature, and moves its mysterious, Punctual and periodical changes.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).