• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.107-115
• /
• 2005

This paper presents the structure of a broadband coplanar waveguide(CPW) fed square slot antenna with a impedance bandwidth tuning patch. The designing method of the antenna suggests that two resonant frequencies are excited as a dual-frequency dipole antenna following the dimensions of the square slot. In other words, the lower resonant frequency mainly depends on the slot width and the higher one its length. A CPW fed square slot antenna with a impedance tuning patch was measured to $20GHz^\~33GHz$, $50\%$, VSWR=2 impedance bandwidth by adjusting the dimensions of the tuning patch when the slot length had $70\%$ of its width. This result shows that a medical CPW fed antenna is easily implemented with a simple square slot structure including a bandwidth tuning patch in the center.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.732-739
• /
• 2002

Performance of the applicator for hyperthermia is determined by both the degree of impedance matching and specific absorption rate(SAR) distribution in the surrounding tissue. In this paper, the coaxial-slot antenna using staircasing approximation in the FDTD is analyzed and the coaxial-slot antenna for the hyperthermia improving heating characteristics is designed. The SAR of the coaxial-slot antenna approximated to staircasing and square model is analyzed, and the SAR of staircasing model is compared with Saito's SAR measurement and square model. As a result, the SAR of proposed model exhibited agreement with the Saito's measurement of square model. Ig averaged SAR on the liver caused by proposed antenna in this paper is 195 W/kg, and is about 27.9 % higher than the Saito's antenna 152.5 W/kg, respectively.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.506-509
• /
• 2009

A novel design of a compact square-ring slot microstrip antenna for achieving circular polarization (CP) operation is proposed and experimentally studied. By using an arrow-shaped slot structure as a radiating element, the resonant frequency of the proposed antenna is significantly lowered, which can lead to a large size reduction for fixed frequency operation. The CP radiation characteristics are achieved by loading with proper asymmetry, which can be placed diagonally. A prototype of the proposed design is implemented and its performance is measured. Measured results show that radiation patterns with good CP characteristics are obtained at the resonant frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.223-227
• /
• 2001

To complement the narrow band characteristics of the microstrip patch antenna, the slot patch antenna was designed for the wide band characteristics. The microstrip slot patch antenna has wide band characteristics when the size of the slots and the feed line shapes are designed accordingly. In this study, various substrates as a epsilon-10, and a epoxy were used to design slot patch antennas. The feed line structure of the circular and square were also designed to have wide band. In the case of slot antennas with the circular patch shapes using epsilon-10 plate 50mm thickness with relative permittivity the 41% bandwidth on the 1.5∼2.28㎓ was shown. When an Epoxy plate 1.Sum thickness with relative permittivity 4.75 is used to construct a circular slot antenna with a square patch form, the frequency band width was obtained 77% as the 1.2∼2.7㎓ frequency range. These results are coincided well with the theoretical results.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.379-382
• /
• 2006

A novel reconfigurable microstrip patch antenna with frequency and polarization diversities is proposed. A U-slot is incorporated into a square patch, and a PIN diode is utilized to switch the slot on and off, which realizes the frequency diversity characteristic. The polarization diversities among linear polarization (LP), right-hand circular polarization (RHCP), and left-hand circular polarization (LHCP) are also obtained by switching three PIN diodes on the slot and the truncating corners of a square patch on and off. The antenna design and experimental results are presented.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.319-323
• /
• 2000

A method for miniaturization of microstrip patch antenna without degrading its radiation characteristics is investigated. The ring geometry introduces additional parameters to the antenna that can be used to control its resonance frequency and bandwidth. For a single square ring increasing the size of patch decreases the resonance frequency and bandwidth. To match the antenna to a transmission line and also enhance its bandwidth. the square ring patch is stacked by a square ring patch. The computed results are compared with experiment and good agreement is obtained.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.199-202
• /
• 2000

The U-slot patch antenna has been found experimentally to provide impedance and gain bandwidths. Experiment and simulation results include impedance bandwidth, copolar and crosspolar-pattern characteristics and gain measurements. If one of the parameters such as patch width or feed position is varied, U-slot patch can also function as a dual-frequency antenna.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.289-292
• /
• 2009

In this paper, an optimum design center frequency proposes portable RFID reader antenna that is 920MHz frequency using the Taguchi's Method. Proposed antenna is cut corner of opposite angle and it's structure that have slots in four sides microstrip patch of a perfect square shape. This slot structure can miniaturize microstrip patch antenna and confirmed through an experiment that size of antenna about 18% decreases than structure that slot does not exist. Because compact antenna that have structure of slot changes according to complex design variables, analysis and experimental design for minimization of experiment number of times are required for optimum antenna design. In this research, designed antenna that have optimum structure when introduce and designs table of orthogonal arrays of the Taguchi's Method been experimental design that can minimize analysis and experiment number of times, achieve responsiveness analysis of main elements and analyzes the effect and minimizes design repeat with analysis result. Presented experiment result about antenna special quality that permittivity is 4.4 and manufactures to board of Epoxy 3.2T.

• ETRI Journal
• /
• v.32 no.3
• /
• pp.468-471
• /
• 2010

A compact square patch antenna with reconfigurable circular polarization (CP) at 2.4 GHz is proposed. Circular polarization is generated by an arc-shaped slot on the ground plane. In order to switch the CP orientation, the current flow direction of the patch is reconfigured via the PIN diodes mounted on the slot. As the slot and bias circuit are not placed on the patch side, the proposed antenna radiates a CP wave without alteration in the main beam direction. From the experimental results, the impedance and CP bandwidths of the proposed antenna have been demonstrated for up to 80 MHz and 25 MHz, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.9-15
• /
• 2011

The microstrip reflectarray antenna is rapidly becoming an attractive alternative solution to the traditional parabolic reflector antenna. However, the bandwidth of the microstrip reflectarray using the single layer structure is very narrow. To obtain wide bandwidth characteristic, the microstrip reflectarray using the multi-layer structure has been used, but it has some disadvantages such as high cost and complicated design. In this paper, to obtain low cost and wide bandwidth, the microstrip reflectarray antenna composed of square patch with two U-slots using the single-layer structure is proposed. The proposed antenna demonstrate radiation efficiency closed to 55.5 % and 1 dB gain bandwidth over 14 % at 12.5 GHz.