• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.3
• /
• pp.149-157
• /
• 2005

Typical water quality (WQ) parameters defined in the governing equation of the WQ model are the pollutant loads from atmosphere and watersheds, pollutant release rates from sediment, diffusion coefficient and reaction coefficient etc. The direct measurement of these parameters is very difficult as well as requires high cost. In this study, the pollutant budget equation including these parameters was used to construct the linear simultaneous equations. Based on these equations, the inverse problems were constructed and WQ parameter estimation method minimizing the sum of squared errors between the computed and observed amounts of the mass changes was suggested. WQ parameters, i.e., the atmospheric pollutant loads, sediment release rates, diffusion coefficients and reaction coefficient, were estimated using .this method by utilizing the vertical concentration profile data which has been observed in Cheonsu Bay and Ulsan Port. Values of the estimated parameters show a large temporal variation. However, this technique is persuasive in that the RHS (root mean square) error was less than $5.0\%$ of the observed value ranges and the agreement index was greater than 0.95.

• Explosives and Blasting
• /
• v.9 no.1
• /
• pp.3-13
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ${\phi}70mm$ on the calcalious sand stone (soft -modelate -semi hard Rock). The total numbers of test blast were 88. Scale distance were induced 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ were V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum charge per delay-period of eight milliseconds or more (kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents where the quantity $\frac{D}{W^b}$ is known as the scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagorized in three groups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge Per delay Plots of peak particle velocity versus distoance were made on log-log coordinates. The data are grouped by test and P.P.V. The linear grouping of the data permits their representation by an equation of the form ; $V=K(\frac{D}{W^{\frac{1}{3}})^{-n}$ The value of K(41 or 124) and n(1.41 or 1.66) were determined for each set of data by the method of least squores. Statistical tests showed that a common slope, n, could be used for all data of a given components. Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m ------- under l00m ${\cdots\cdots\cdots}{\;}41(D/sqrt[2]{W})^{-1.41}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}A$ Over 100m ${\cdots\cdots\cdots\cdots\cdots}{\;}121(D/sqrt[3]{W})^{-1.66}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}B$ where ; V is peak particle velocity In cm / sec D is distance in m and W, maximLlm charge weight per day in kg K value on the above equation has to be more specified for further understaring about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Asia pacific journal of information systems
• /
• v.24 no.3
• /
• pp.255-279
• /
• 2014

It is not too much to say that smartphones have become an essential part of our lives due to their versatility. Nevertheless, they still have less overall capabilities than their desktop counterparts. Specifically, they have small screens and low resolutions, which make their applications difficult to have a usable interface. To account for these limitations, the interface of smartphone applications should be designed carefully and properly. Good interface design to any application is critical. However, a comprehensive information systems (IS) literature review found that there has been little research on the user interface design of smartphone applications. More specifically, there has been little empirical evidence and understanding about how metaphors, an imaginative way of describing objects and concepts, in the user interface of smartphone applications affect users' intention to use the applications. Thereby, the research goals of this study are to examine 1) the effects of the metaphors in the user interface of smartphone applications on the interaction between users and applications and 2) the effects of mediating variables including the interaction between users and applications, users' beliefs and attitudes, on users' intention to use the applications. A survey was conducted to collect data. University students and practitioners participated in the survey. A 24-item questionnaire was developed on a 5-point Likert-type scale. The measurement items were mostly adapted from the previous studies in the IS literature and modified to fit the context of this study. First, a principal component factor analysis was performed to explore the inter-relationships among a set of variables. The analysis showed that most of the items loaded quite strongly on the six components. The analysis also revealed the six components with eigenvalues exceeding 1, explaining a total of 70.7 per cent of the variance. The reliabilities of the items were also checked. Most Cronbach alpha values were above 0.8, so the scales were considered reliable. In sum, the results of the analysis support the decision to retain the six factors for further investigation. Next, the structural model was analyzed with AMOS structural equation modeling. The values of GFI, AGFI, NFI, TLI, CFI, and RMSEA were checked. The values showed that the research model considerably have a good fit in general. Next, the convergent and discriminant validities of all constructs were examined. The values for the standardized regression weights and critical ration (CR) indicated sufficient convergent validity for all constructs. In addition, the square root of the average variance extracted (AVE) of each construct was compared with its correlations with all other constructs. The results supported discriminant validity for all constructs. In sum, the results of analysis demonstrated adequate convergent and discriminant validities for all constructs. Finally, path coefficients between the variables were examined. Methphor was found to have an impact on interaction (${\beta}$ = .457, p = .000). There were also significant effects of the interaction on perceived usefulness (${\beta}$ = .273, p = .000) and ease of use (${\beta}$ = .405, p = .000). User attitude was significantly influenced by these two beliefs, perceived usefulness (${\beta}$ = .386, p = .000) and ease of use (${\beta}$ = .347, p = .000) respectively. Further, the results of analysis found that users' intention to use smartphone applications was significantly influenced by user attitude (${\beta}$ = .567, p = .000). Based upon the analyses, all hypotheses were supported. This study found that the metaphors used in the interface of smartphone applications affect not only the interaction between users and applications, but also users' intention to use the applications through the mediating variables, perceived usefulness and ease of use. These findings imply that if the metaphors used in the user interface of application are easy enough to understand for smartphone users, then the application can be perceived useful and easy to use, which in turn make users to have an intention to use the application. In conclusion, this study contributed not only to validate and extend Technology Acceptance Model (TAM) partially, but also to develop the construct of metaphor in smartphone settings. However, since a single empirical study cannot be enough to validate the findings, some limitations should be considered.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.1
• /
• pp.28-36
• /
• 2023

Solar radiation that is measured at relatively small number of weather stations is one of key inputs to crop models for estimation of crop productivity. Solar radiation products derived from GK-2A and Himawari 8 satellite data have become available, which would allow for preparation of input data to crop models, especially for assessment of crop productivity under an agrivoltaic system where crop and power can be produced at the same time. The objective of this study was to compare the degree of agreement between the solar radiation products obtained from those satellite data. The sub hourly products for solar radiation were collected to prepare their daily summary for the period from May to October in 2020 during which both satellite products for solar radiation were available. Root mean square error (RMSE) and its normalized error (NRMSE) were determined for daily sum of solar radiation. The cumulative values of solar radiation for the study period were also compared to represent the impact of the errors for those products on crop growth simulations. It was found that the data product from the Himawari 8 satellite tended to have smaller values of RMSE and NRMSE than that from the GK-2A satellite. The Himawari 8 satellite product had smaller errors at a large number of weather stations when the cumulative solar radiation was compared with the measurements. This suggests that the use of Himawari 8 satellite products would cause less uncertainty than that of GK2-A products for estimation of crop yield. This merits further studies to apply the Himawari 8 satellites to estimation of solar power generation as well as crop yield under an agrivoltaic system.

• Sleep Medicine and Psychophysiology
• /
• v.24 no.1
• /
• pp.46-54
• /
• 2017

Objectives: Domestic violence is related to many psychiatric diseases, such as depression, anxiety disorder, and PTSD. Heart rate variability (HRV) is an index of autonomic control of the heart and is related to cardiovascular and emotional disorders. Although there have been some studies on the effects of domestic violence on women's mental health, relatively little information is available on HRV in this population. The aim of this study is to investigate demographic data, psychological features, and HRV in female victims of domestic violence and difference between Korean and foreign female victims. Methods: A total of 210 female victims of domestic violence (166 Korean women and 44 foreign women) were recruited for this study. Psychological symptoms were measured using the Hamilton Rating Scale for Anxiety (HAM-A), Hamilton Rating Scale for Depression (HAM-D), and Impact of Event Scale-Revised (IES-R). HRV measures were assessed by time-domain and frequency-domain analyses. Results: The mean score of HAM-A was 13.81, that of HAM-D was 12.92, and that of IES-R was 33.61 ; there were no significant differences between Korean and foreign women in these measures. In HRV time domain analyses, approximate entropy (ApEn) was significantly increased in foreign women compared to the Korean women. The square root of the mean of the sum of the squares of differences between adjacent NN intervals (RMSSD) was significantly decreased in foreign women compared to Korean women. There were no significant differences in the other HRV variables between Korean and foreign women. Conclusion: Female victims of domestic violence in Korea are associated with depression, anxiety, and PTSD symptoms. The physiologic factors of a female victim's nationality could be related to higher ApEn and lower RMSSD in foreign female victims. These findings have important implications for future study to study the relationships among ethnic and environmental factors and HRV variables.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2009

Accurate solar radiation data are critical to evaluate major physiological responses of plants. For most upland crops and orchard plants growing in complex terrain, however, it is not easy for farmers or agronomists to access solar irradiance data. Here we suggest a simple method using a sun-slope geometry based topographical coefficient to estimate daily solar irradiance on any sloping surfaces from global solar radiation measured at a nearby weather station. An hourly solar irradiance ratio ($W_i$) between sloping and horizontal surface is defined as multiplication of the relative solar intensity($k_i$) and the slope irradiance ratio($r_i$) at an hourly interval. The $k_i$ is the ratio of hourly solar radiation to the 24 hour cumulative radiation on a horizontal surface under clear sky conditions. The $r_i$ is the ratio of clear sky radiation on a given slope to that on a horizontal reference. Daily coefficient for slope correction is simply the sum of $W_i$ on each date. We calculated daily solar irradiance at 8 side slope locations circumventing a cone-shaped parasitic volcano(c.a., 570m diameter for the bottom circle and 90m bottom-to-top height) by multiplying these coefficients to the global solar radiation measured horizontally. Comparison with the measured slope irradiance from April 2007 to March 2008 resulted in the root mean square error(RMSE) of $1.61MJ\;m^{-2}$ for the whole period but the RMSE for April to October(i.e., major cropping season in Korea) was much lower and satisfied the 5% error tolerance for radiation measurement. The RMSE was smallest in October regardless of slope aspect, and the aspect dependent variation of RMSE was greatest in November. Annual variation in RMSE was greatest on north and south facing slopes, followed by southwest, southeast, and northwest slopes in decreasing order. Once the coefficients are prepared, global solar radiation data from nearby stations can be easily converted to the solar irradiance map at landscape scales with the operational reliability in cropping season.