• 대한금속재료학회지
• /
• 제49권3호
• /
• pp.250-255
• /
• 2011

The basic properties and electrical characteristics of sputtering films deposited with a commercial cast target and Spark Plasma Sintering (SPS) were compared and analyzed. From the results, the Cu film prepared heating $60^{\circ}C/min$ (SPS process) showed a similar specific resistance compared to the commercial cast Cu film. Also, auording to the results of XRD, SIMS, and TEM. There was not much difference in the crystal structure and impurities between the two films. Consequently, the SPS Cu target was found to have quite similar properties with the commercial one and it is expected to be applied in futare research to the metal wiring material for semiconductor/display devices.

• 한국수정란이식학회지
• /
• 제24권3호
• /
• pp.145-150
• /
• 2009

This study was conducted to examine the effects of human follicular fluid and gonadotropin (FSH+HCG+rhEGF) on in vitro maturation, fertilization and development of human immature oocytes. Cumulus-oocyte complexes (COCs) were collected following for in vitro fertilization and embryo transfer (IVF-ET) cycles of the patients. At the time of oocytes collection, oocytes were classified into MII, MI and GV in accordance with their appearance (MII: Fully mature oocyte at metaphase II of meiosis; MI: Nearly mature oocytes at metaphase I of meiosis; GV: Immature oocytes at prophase I of meiosis). After controlled ovarian stimulation using gonadotropin(FSH) and human chorionic gonadotropin (HCG) in 70 ICSI cycles, 158 MI to MII matured oocytes were intracytoplasmic sperm injection (ICSI) ${\sim}4$ h after in vitro culture and 553 MII oocytes were ICSI after denudation. The aspirated MI and GV oocytes were cultured in culture medium containing 10% (v/v) serum protein substitute (SPS), 10% (v/v) human follicular fluid (hFF) and 10% (v/v) serum protein substitute (SPS)+1 IU/ml FSH+10 IU/ml HCG+10 ng/ml recombinant human epidermal growth factor (rhEGF). The maturation rate of immature oocytes was similar among the three group. When maturation medium was supplemented with 10% SPS, 10% hFF or gonadotropins, the fertilization rate of in vitro matured oocytes was higher in 10% SPS (80.0%), but there was no statistical significance (78.2%; hFF, 76.9%; gonadotropin, p>0.05). The development rate of human embryos developed to $6{\sim}8$ cells were not significant difference in the medium containing SPS, hFF and gonadotropins (65.6%, 65.9% and 66.7%). The results of these study suggest that human follicular fluid and gonadotropins supplemented in the culture medium was not effected on the in vitro maturation, fertilization and development of human immature oocytes.

• 수산해양교육연구
• /
• 제29권3호
• /
• pp.711-718
• /
• 2017

This study identified application range of SPS Code(Special Purpose Ship Code) applied to fishery training ship in Korea, and proposed counterplan for port state control. The latest contents of relevant convention was verified, used APCIS of Tokyo MOU and EQASIS provided by EU to analyze the current condition and deficiencies of port state control of fishery training ship. As the result, the SPS code equal to passenger ship and cargo ship of SOLAS convention should be satisfied with fishery training ship, and must follow ISPS Code. As for the result of record of port state control, it was confirmed that 8 fishery training ships were inspected 76 times and pointed out with 411 deficiencies in Tokyo MOU nation. 75% of deficiencies were related to SOLAS convention, and 71 times of inspections were conducted in Japan. Because it is not free from the fishery training ship, there is a need for active corresponding and preparation by enhancing local cooperative system and sharing the Internet inspection background, and need to develop and implement in-depth internship program to improve port state control counter plan for the trainees.

• 열처리공학회지
• /
• 제31권3호
• /
• pp.126-134
• /
• 2018

In this research, we produced polycrystalline n-type $Bi_2Te_{2.7}Se_{0.3}$ powder using water atomization. To obtain full benefit through water atomized powder, we have implemented spark plasma sintering and hot extrusion for powder compaction. The microstructure and thermoelectric properties were investigated and compared. The average grain size of SPS and extruded bulks were 3.08 and $3.86{\mu}m$ respectively. The extruded material microstructure contains layered grains with less grain boundaries and its counter-part SPS displays dense packed grains with high grain boundaries. Among both bulks, extrusion sample exhibited high power factor (PF) of $2.96{\times}10^{-3}Wm^{-1}K^{-2}$ which is 38% higher than SPS ($2.14{\times}10^{-3}$) bulk sample. Due to variations in grain size and grain boundaries, the SPS bulk shows low thermal conductivity than extruded bulk. However, the extruded bulk sample exhibited a peak ZT of 0.69 at 400 K, which is 19% higher than SPS bulk sample, due to its higher power factor.

• 한국재료학회지
• /
• 제20권6호
• /
• pp.326-330
• /
• 2010

$CoSb_3$ Skutterudites materials have high potential for thermoelectric application at mid-temperature range because of their superior thermoelectric properties via control of charge carrier density and substitution of foreign atoms. Improvement of thermoelectric properties is expected for the ternary solid solution developed by substitution of foreign atoms having different valances into the $CoSb_3$ matrix. In this study, ternary solid solutions with a stoichiometry of $Co_{1-x}Ni_xSb_3$ x = 0.01, 0.05, 0.1, 0.2, $CoSb_{3-y}Te_y$, y = 0.1, 0.2, 0.3 were prepared by the Spark Plasma Sintering (SPS) system. Before the SPS synthesis, the ingots were synthesized by vacuum induction melting and followed by annealing. For phase analysis X-ray powder diffraction patterns were checked. All the samples were confirmed as single phase; however, with samples that were more doped than the solubility limit some secondary phases were detected. All the samples doped with Ni and Te atoms showed a negative Seebeck coefficient and their electrical conductivities increased with the doping amount up to the solubility limit. For the samples prepared by SPS the maximum value for dimensionless figure of merit reached 0.26, 0.42 for $Co_{0.9}Ni_{0.1}Sb_3$, $CoSb_{2.8}Te_{0.2}$ at 690 K, respectively. These results show that the SPS method is effective in this system and Ni/Te dopants are also effective for increasing thermoelectric properties of this system.

• 대한한의학방제학회지
• /
• 제25권2호
• /
• pp.123-134
• /
• 2017

Wounds are commonly created during almost every kind of surgery, trauma and skin diseases. Delayed wound healing affects a plenty of patients and requires prolonged treatments that seriously reduce the quality of life for patients. Skin damage involving large areas or great severity can lead to disability or even death. Wound healing involves a complicated series of actions, of various tissues and cell lineages, concerning inflammation, migration, proliferation, reepithelialization, and remodeling. Sopung-san is reported to have anti-inflammatory effect and has been used for various skin diseases such as allergic dermatitis and atopic dermatitis. In this study, the hypothesis that oral treatment with Sopung-san could enhances healing potential on rat full thickness skin wounds was tested. Twenty young male Sprague-Dawley rats were used for the studies. A full-thickness skin wound was made on the dorsal skin of the rats. Either Sopung-san water extract (SPS) or saline (Control) was orally administrated every day. The wound area was measured and the percentages of wound contraction, wound healed and wound epithelization were calculated. Wound tissue samples were excised following injection for histopathological and immunohistological examination. Wound area in rats of SPS group significantly was decreased compared to Control. SPS group showed significant promotion of wound healing compared to Cotrol group in the percentages of wound contraction, wound healed and wound epithelization. Histopathological examination revealed that SPS induces neo-vascularization potential in wound healing process. SPS treatment in rats significantly accelerated cutaneous wound healing in the neo-vascularization process by increasing VEGF and $TGF-{\beta}1$ synthesis. The results suggest that Sopung-san affects key cellular processes responsible for wound repair and point to a unique potential for this molecule in the therapy of skin wounds, particularly as an angiogenic agent.

• 대한간호학회지
• /
• 제42권7호
• /
• pp.974-983
• /
• 2012

Purpose: The purpose of this study was to translate the Spiritual Perspective Scale (SPS) and Self-transcendence Scale (STS) into Korean and test the psychometric properties of the instruments with Korean elders. Methods: A cross-sectional survey design was used to implement the three stages of the study. Stage I consisted of translating and reviewing the scales by six experts. In Stage II, equivalence was tested by comparing the responses between the Korean and English versions among 71 bilingual adults. Stage III established the psychometric properties of the Korean versions SPS-K and STS-K among 154 Korean elders. Results: Cronbach's alpha of the SPS-K and the STS-K .97, and .85 respectively with Korean elders. Factor analysis showed that the SPS-K had one factor; the STS-K had four factors with one factor clearly representing self-transcendence as theorized. Both scales showed good reliability and validity for the translated Korean versions. However, continued study of the construct validity of the STS-K is needed. Conclusion: Study findings indicate that the SPS-K and the STS-K could be useful for nurses and geriatric researchers to assess a broadly defined spirituality, and to conduct research on spirituality and health among Korean elders. Use of these scales within a theory-based study may contribute to further knowledge about the role of spirituality in the health and well-being of Korean people facing health crises.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.545-558
• /
• 2006

The current conditions of large water mains are evaluated by deteriorations and the causes of deterioration are investigated through visual assessments in the field, mechanical tests and analysis of chemical compositions in laboratory for each pipe material, unlined cast iron pipes (CIPs), ductile iron pipes (DCIPs) and steel pipes (SPs) Tubercles and scales from internal and external corrosion of unlined cast iron pipes were identified as the causes of functional performance limitations in large water mains. It is investigated that main causes of internal and external corrosion of water pipes are from lots of depositions of organic and inorganic substances on pipe surface, concentrated pitting, and uniform corrosion by local or global exfoliation or detachment of lining and coatings of DCIPs and SPs. Internal and external corrosion depths of CIPs were higher than those of DCIPs and SPs. Consequently, total corrosion rate summed internal and external corrosion rates of CIPs also were shown to be higher than those of DCIPs and SPs. The failure time from hole generation of CIPs by total corrosion rate was predicted to be taken sixteen years, and DCIPs and SPs were twenty-six years and one hundred and fifty three years. And longitudinal deflection of investigated water mains were not happened and mechanical strengths such as tensile strength, elongation, and hardness also were mostly suited to Korea Standards. It was thought that the weakness of tensile strength of one sample(S-11) was, however, due to higher carbon contents(%) in CIPs. Pipe deterioration score of S-46 was 55.2 and was preferentially assessed to be rehabilitated.

• 한국결정성장학회지
• /
• 제15권2호
• /
• pp.75-78
• /
• 2005

본 연구에서는 고온 융점과 높은 Seebeck 계수로 인해 고온 열전 재료로서 매우 우수한 silicon boride ($SiB_6$)의 고밀도 소결체를 방전 플라즈마 소결법(spark plasma sintering, SPS)을 도입하여 제조하였으며, 소결된 시편의 미세구조 및 열전 특성을 평가하였다. $1500^{\circ}C$의 비교적 저온에서 이론 밀도의 약 99%의 소결밀도로 SPS법을 통해 효과적으로 $SiB_6$를 치밀화 할 수 있었으며 이들 시편들의 열전특성 평가로부터, hot-press법으로 제조된 시편과 비교하여 매우 향상된 Seebeck 계수를 얻을 수 있었으며 상대적으로 높은 출력인자 값을 나타냈다.

• 한국초등과학교육학회지:초등과학교육
• /
• 제24권2호
• /
• pp.123-129
• /
• 2005

The purpose of this study was to investigate the interaction patterns between teachers and students appeared in sixth grade elementary science lessons. To this end, we set research questions as what are the types of SPS (Social Participation Structure) between teachers and students in the class. Eighteen elementary science lessons were observed. Data were collected by video recordings and observation method. The result showed that the types of SPS were classified into nine. 1) A teacher initiates the whole students into interaction with him. 2) The whole students keep silent or carry out specific activities under the teacher's direction. 3) A teacher initiates some students into interaction. 4) A teacher names specific students to read a text. 5) A teacher initiates the whole students into group interactions. 6) Students interact with each other irrespective of the teacher's intention. 7) Students initiate a teacher into interactions with them. 8) A teacher intervenes during the students' activities and this intervention, in turn, produces interactions between the teacher and the students. 9) A teacher directs the whole class to read a learning goal or a learning material. This study shows that SPS-1 and SPS-3 are the most frequently observed interaction patterns in the elementary science lessons.