• 소성∙가공
• /
• 제22권1호
• /
• pp.30-35
• /
• 2013

In this study, springback amounts of an S-rail are quantitatively compared according to the hardening model using a finite element simulation for the stamping process with high strength steels. For comparison of the hardening models, two types of hardening models were investigated. The two models were isotropic hardening and kinematic hardening. For the analysis with kinematic hardening, the Yoshida-Uemori model was selected. Five kinds of springback modes were measured at designated sections and a comparison was made between the experiment and the analyses with two types of hardening models. The analysis results show that the springback in the flange and the wall curl are predicted more accurately with a kinematic hardening model.

• 한국산업정보학회논문지
• /
• 제17권7호
• /
• pp.43-50
• /
• 2012

본 논문에서는 차량용 센터필러 부품의 성형공정에서 발생하는 스프링백 문제를 해결하기 위한 일환으로 기존 부품의 금형보정이력 정보를 체계적으로 데이터베이스화하였다. 기존 부품의 경우 과도한 스프링백 발생에 의한 형상정밀도 불량을 해결하기 위하여 3차의 금형 보정을 현장기술자의 작업에 의하여 수행하였으나, 보정값이 정량화되어 있지 못한 문제가 있었다. 본 논문에서는 기존 금형 보정과정의 결과를 유한요소해석을 통하여 정량적으로 분석하고 보정이 의도대로 이루어졌는지를 평가하는 데이터베이스를 구축하였다. 구축된 데이터베이스 정보를 활용하여 유사부품의 금형설계에 활용하였으며, 결과적으로 보정횟수를 감소시키고도 제품을 성공적으로 성형할 수 있었다.

• 소성∙가공
• /
• 제18권8호
• /
• pp.601-606
• /
• 2009

High strength steels are widely used for lightweight automobile parts and the control of springback is very important in sheet metal forming. The object of this study is to develop the forming process for stair type side sill made of high strength steel, DP780. Stair type side sill with local formed area and geometry change area can improve stiffness and design freedom but there are few studies for forming process. The forming technology considered in this paper is form type process, which has many advantages for forming of high strength steel compared with draw type process. Finite element analysis is carried out to predict formability and springback. It is shown that angle calibration of die is essential for reducing springback, and local forming involving bead is effective to control springback also. The effectiveness of local forming and angle calibration is verified by experimental.

• 소성∙가공
• /
• 제8권1호
• /
• pp.29-37
• /
• 1999

An analysis system for sheet metal forming(SAT_STAMP) has been developed to improve the design and tryout process by predicting the deformation behavior more precisely. This analysis system consists of forming analysis, springback analysis and post processor modules. The more accurate prediction of stress history can be achieved due to the improved contact algorithm. Continuous simulation of sequential processes can be carried out conveniently without interruption by the improved data management of the developed system. The error of data transfer between forming analysis and springback analysis is minimized using the proper shell element. Several benchmark test results and practical results are presented to show the effectiveness and reliability of this program.

• 소성∙가공
• /
• 제15권4호
• /
• pp.289-294
• /
• 2006

To reduce automobile parts weight, TWB(tailored welded blank) forming is widely used in panel forming. But products used TWB forming process have many defect, wrinkle, crack and springback. So study of TWB forming process character is very important. In this study one of the current problems of TWB forming was analyzed, especially for the try-out process of inner door panel without frame. A comparison was made between actual measurements and prediction of forming analysis for formability and springback. Also a new analysis die model which have additional plane on die surface was proposed to correct result of forming analysis. This proposed method overcomes the difference for TWB forming result between try-out and analysis.

• 소성∙가공
• /
• 제14권5호
• /
• pp.423-431
• /
• 2005

In this paper, a systematic attempt for estimating geometric dimensions of cold forgings is made by finite element method and a practical approach is presented. In the approach, the forging process is simulated by a rigid-plastic finite element method under the assumption that the die is rigid. With the information obtained from the forging simulation, die structural analysis and springback analysis of the material are carried out. In the springback analysis, both mechanical load and thermal load are considered. The mechanical load is applied by unloading the forming load elastically and the thermal load is by cooling the increased temperature due to the plastic work to the room temperature. All the results are added to predict the final dimensions of the cold forged product. The predicted dimensions are compared with the experiments. The comparison has revealed that predicted results are acceptable in the application sense.

• Structural Engineering and Mechanics
• /
• 제52권3호
• /
• pp.469-483
• /
• 2014

In an indentation approach, the smooth rigid spherical ball penetrated into a deformable flat is considered for the study based on contact mechanics approach. The elastic-plastic frictionless spherical indentation analysis has been under taken in the finite element analysis using "ABAQUS" and experimental study. The spherical indentation has been studied for the materials like steel, aluminium, copper and brass with an identical spherical indenter for diverse indentation depths. The springback analysis is executed for studying the actual indentation depth after the indenter is unloaded. In the springback simulation, the material recovers its elastic deformation after the indenter is unloaded. The residual diameter and depth of an indentation for various materials are measured and compared with simulation results. It shows a good agreement between the simulation and an experimental studies.

• 대한기계학회논문집A
• /
• 제36권3호
• /
• pp.283-288
• /
• 2012

자동차 부품의 경량화를 위해서 초고강도강의 사용이 확대됨에 따라 판재성형 공정에서 초고강도 강판의 스프링백 제어의 중요성이 점차로 확대되고 있다. 본 연구에서는 초고강도 소재를 사용한 U 형채널 부품의 성형을 위해서 사용되는 다단공정에서 공정 변수들이 스프링백에 미치는 영향에 대하여 검토하였다. 해석을 위해서는 유한요소법이 사용되었으며, 주요 공정 변수는 공정수, 금형 각도, 금형 반경, 펀치성형방향이다. 단공정에 비해서 다단공정이 스프링백을 아주 효과적으로 제어할 수 있었으며, 금형반경과 펀치성형방향의 각도가 작을수록 스프링백 제어에 효과적이었다. 그러나 금형 각도의 영향은 크지 않았다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.43-46
• /
• 2004

Since Mg alloy has many attractive advantages among the practically used metals, many researchers have been studied to develop useful process and material. However, study for sheet forming has not been a few because of low formability on room temperature. Formability and springback for AZ31 alloy sheet have been studied to develop the cold forming technology. The experimental and FE analysis were performed to analyzed the springback amounts by using a model of our on. A different three materials were used to investigate the effects of material characteristics. The springback amounts of Mg-alloy sheet formed part were larger than that of the other material.

• 한국생산제조학회지
• /
• 제23권4호
• /
• pp.350-354
• /
• 2014

Recently, high strength steel (HSS) sheet metal has been widely used to improve lightweight structures in the automotive industry. Because HSS sheets have high strength but low elongation, it is difficult both to make products with complex shapes and to control excessive springback. In order to reduce the springback after forming using HSS, draw beads were introduced in this study. The design variables, including the draw-bead positions and shapes, were optimized using a finite element analysis. A mold for a scanner support, which is part of an A3 printer, was designed using the proposed method and then utilized. The results from a finite element simulation and optimization were compared with the experiment results.