• Structural Engineering and Mechanics
• /
• 제89권1호
• /
• pp.77-91
• /
• 2024

During strong seismic events, inelastic shear deformation occurs in beam-column joints. To capture inelastic shear deformation, an analytical model for beam-column joint in reinforced concrete (RC) frame structures has been proposed in this study. The proposed model has been developed using a rotational spring and rigid links. The stiffness properties of the rotational spring element have been assigned in terms of a moment rotation curve developed from the shear stress-strain backbone curve. The inelastic rotation behavior of joint has been categorized in three stages viz. cracking, yielding and ultimate. The joint shear stress and strain values at these stages have been estimated using analytical models and experimental database respectively. The stiffness properties of joint rotational spring have been modified by incorporating a geometry factor based on dimensions of adjoining beam and column members. The hysteretic response of the joint rotational spring has been defined by a pivot hysteresis model. The response of the proposed analytical model has been verified initially at the component level and later at the structural level with the two actually tested RC frame structures. The proposed joint model effectively emulates the inelastic behavior precisely with the experimental results at component as well as at structural levels.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.411-423
• /
• 2008

Pneumatic vibration isolator has a wide application for ground-vibration isolation of vibration-sensitive equipments. Recent advances In precision machine tools and instruments such as nano-technology or medical devices require a better isolation performance, which can be efficiently done by precise modeling- and design- of the isolation system. This paper will discuss an efficient transmissibility design method for pneumatic vibration isolator by employing the complex stiffness model of dual-chamber pneumatic spring developed in our previous research. Three design parameters of volume ratio between the two pneumatic chambers, the geometry of capillary tube connecting the two pneumatic chambers and finally the stiffness of diaphragm necessarily employed for prevention of air leakage were found to be important factors in transmissibility design. Based on design technique that maximizes damping of dual-chamber pneumatic spring, trade-off among the resonance frequency of transmissibility, peak transmissibility and transmissibility in high frequency range was found, which was not ever stated in previous researches. Furthermore this paper will discuss about negative role of diaphragm in transmissibility design. Then the design method proposed in this paper will be illustrated through experiment at measurements.

• Tribology and Lubricants
• /
• 제29권3호
• /
• pp.160-166
• /
• 2013

There is an indispensable need for force calibration for quantitative nanoscale force measurement using atomic force microscopy. Calibrating the normal force is relatively straightforward, whereas doing so for the lateral force is often complicated because of the difficulty in determining the optical lever sensitivity. In particular, the lateral force calibration of a colloidal probe in a liquid environment often has a larger uncertainty as a result of the effects of the epoxy, the location of the colloidal particle on the cantilever, and a decrease in the quality factor. In this work, the lateral force of a colloidal probe using a reference cantilever with a known spring constant was calibrated in a liquid environment. By obtaining the spring constant and the lateral sensitivity at the equator of a spherical colloidal particle, the damage to the bottom surface of the colloidal particle could be eliminated. Further, it was shown that the effect of the contact stiffness on the determination of the lateral spring constant of the cantilever could be minimized. It was concluded that this method can be effectively used for the lateral force calibration of a colloidal probe in a liquid environment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.504-513
• /
• 1999

Usually bellows are designed for the purpose of absorbing axial movement. To find out axial stiffness of bellows the axisymmetric shell theory using the finite element method is adopted in this paper. Bellows can be idealised by series of conical frustum-shaped elements because it is axisymmetric shell structure. The force required to deflect bellows axilly is a function of the dimensions of the bellows and the materials from which they are made. The displancements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to r-z cylinderical coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculate the another increments of nodal dis-placements that is the step by method is used in this paper. spring constant is analyzed according to the changing geometric factors of u-shaped bellows. The FEM results were agreed with experiment. Using developed FORTRAN PROGRAM spring constant can be predicted by input of a few factors.

• Structural Engineering and Mechanics
• /
• 제25권6호
• /
• pp.717-732
• /
• 2007

A formula to approximate the fundamental period of a fixed-free mass-spring system with varying mass and varying stiffness is formulated. The formula is derived mainly by taking the dominant parts from the general form of the characteristic polynomial, and adjusting the initial approximation by a coefficient derived from the exact solution of a uniform case. The formula is tested for a large number of randomly generated structures, and the results show that the approximated fundamental periods are within the error range of 4% with 90% of confidence. Also, the error is shown to be normally distributed with zero mean, and the width of the distribution (as measured by the standard deviation) tends to decrease as the total number of discretized elements in the system increases. Other possible extensions of the formula are discussed, including an extension to a continuous cantilever structure with distributed mass and stiffness. The suggested formula provides an efficient way to estimate the fundamental period of building structures and other systems that can be modeled as mass-spring systems.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.78-87
• /
• 1998

A dynamic model of direct-acting OHC valve train system has been used to determine the load conditions in the system. The modified equations for calculating the friction forces between cam and HLA, and at a camshaft bearing have been defined considering the lubrication conditions. Then, to understand the frictional characteristics in the system, a parameter study has been performed. As the results of the analysis, valve spring stiffness and preload have great effects on the friction in the system, but the effects of other parameters are negligible. So, how to design the valve train system with respect to the reduction of friction is to minimize the valve spring stiffness and preload in the limit of satisfying the dynamic constraints.

• 오토저널
• /
• 제11권3호
• /
• pp.49-59
• /
• 1989

The purpose of this paper is to obtain the effect of die lubrication in deep drawing process. The flange wrinkling is analysed by a moment equilibrium method in order to apply the optimum blankholding force to the blank. The experiment has been carried out with the high stiffness spring-type blankholder system. As the result, blankholding pressure is determined in terms of variables in deep drawing process. In the range of frictional coefficient which has been found in this experiment, there was a little difference in required blankholding force but a great difference in drawing force. It was found that the stiffness of blankholder was the major factor which influences on flange wrinkling in spring-type blankholder system.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권3호
• /
• pp.134-138
• /
• 2005

A typical conventional systems of a linear motion use rack and pinions or ball screws to convert rotary motions from DC servo motors. A linear motor has been used a several field for a MEMS technology and a aircraft carrier. We have studied a transient response of a linear actuator with a damping ratio, spring constant and a pressed power for a constant stroke control.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.495-501
• /
• 2001

In this paper, a new technique which models the joints characteristics through reduction of DOFs of structures with joints using component mode synthesis (CMS) method is proposed. Bolt joints are modeled by mass-spring systems. Also generalized mass and stiffness matrices for this models are introduced. Because bolt joints have influence on eigenvalues of structures, exact eigenvalues from modal test are used. The results show that the behaviors of structures with bolt joints depend to a large extent on the translational DOFs and not on rotational DOFs of mass and stiffness matrices of bolts. Furthermore it is confirmed that lumped mass-spring systems as models of bolt joints are effective models considering the facts that joint characteristics converged to constant values in some iterations and eignevalues from proposed method are in good agreement with ones from modal test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.822-826
• /
• 2008

A linkage mechanism is a device to convert an input motion into a desired output motion. Traditional linkage mechanism designs are based on trial and error approaches so that size or shape changes of an original mechanism often result in improper results. In order to resolve these problems, an improved automatic mechanism synthesis method that determines the linkage type and dimensions by using an optimization method during the synthesis process has been proposed. For the synthesis, a planar linkage is modeled as a set of rigid blocks connected by zero-length translational springs with variable stiffness. In this study, the sizes of rigid blocks were also treated as design variables for more general linkage synthesis. The values of spring stiffness and the size of rigid block yielding a desired output motion at the end-effecter are found by using an optimization method.