Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Simplified beam-column joint model for reinforced concrete moment resisting frames

  • Received : 2023.01.07
  • Accepted : 2023.12.11
  • Published : 2024.01.10
⟨ Previous Next ⟩

Abstract

During strong seismic events, inelastic shear deformation occurs in beam-column joints. To capture inelastic shear deformation, an analytical model for beam-column joint in reinforced concrete (RC) frame structures has been proposed in this study. The proposed model has been developed using a rotational spring and rigid links. The stiffness properties of the rotational spring element have been assigned in terms of a moment rotation curve developed from the shear stress-strain backbone curve. The inelastic rotation behavior of joint has been categorized in three stages viz. cracking, yielding and ultimate. The joint shear stress and strain values at these stages have been estimated using analytical models and experimental database respectively. The stiffness properties of joint rotational spring have been modified by incorporating a geometry factor based on dimensions of adjoining beam and column members. The hysteretic response of the joint rotational spring has been defined by a pivot hysteresis model. The response of the proposed analytical model has been verified initially at the component level and later at the structural level with the two actually tested RC frame structures. The proposed joint model effectively emulates the inelastic behavior precisely with the experimental results at component as well as at structural levels.

Keywords

References

  1. Adibi, M., Marefat, M.S. and Allahvirdizadeh, R. (2018), "Nonlinear modeling of cyclic response of RC beam-column joints reinforced by plain bars", Bull. Earthq. Eng., 16, 5529-5556. https://doi.org/10.1007/s10518-018-0399-4.
  2. Alath, S. and Kunnath, S.K. (1995), "Modeling inelastic shear deformations in RC beam-column joints", Engineering Mechanics Proceedings of 10th Conference, Boulder, Colorado, New York, May.
  3. Anderson, J.C. and Townsend, W.H. (1977), "Models for RC frames with degrading stiffness", J. Struct. Div., 103(12), 2361-2376. https://doi.org/10.1061/JSDEAG.0004789.
  4. ASCE 41 (2017), ASCE Standard 41: Seismic Rehabilitation of Existing Buildings, American Society of Civil Engineers (ASCE), Reston, VA.
  5. Behnam, H., Kuang, J.S. and Huang, R.Y. (2017), "Exterior RC wide beam-column connections: Effect of beam width ratio on seismic behaviour", Eng. Struct., 147, 27-44. https://doi.org/10.1016/j.engstruct.2017.05.044.
  6. Burak, B. and Wight, J.K. (2005), "Seismic behavior of eccentric reinforced concrete beam-column-slab connections", Ph.D. Thesis, The University of Michigan, Ann Arbor.
  7. Calvi, G.M., Magenes, G. and Pampanin, S. (2002), "Relevance of beam-column joint damage and collapse in RC frame assessment", J. Earthq. Eng., 6(spec01), 75-100.
  8. Carr, A.J. (1996), "RUAUMOKO the Maori god of volcanoes and earthquakes", Computer Program Library, 27 January 1996 Release, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
  9. Celik, O.C. and Ellingwood, B.R. (2008), "Modeling beam-column joints in fragility assessment of gravity load designed reinforced concrete frames", J. Earthq. Eng., 12(3), 357-381. https://doi.org/10.1080/13632460701457215.
  10. Chen, C.C. and Chen, G.K. (1999), "Cyclic behavior of reinforced concrete eccentric beam-column corner joints connecting spread-ended beams", Struct. J., 96(3), 443-449.
  11. Clyde, C., Pantelides, C.P. and Reaveley, L.D. (2000), "Performance-based evaluation of exterior reinforced concrete building joints for seismic excitation", Pacific Earthquake Engineering Research Center, PEER Report 2000/05, University of California, Berkeley.
  12. CSA (1994), Design of Concrete Structures for Buildings, Standard CAN-A23.3-94, Canadian Standards Association, Rexdale, Ont.
  13. CSI Analysis Reference Manual SAP2000, Computers and Structures Inc. Berkeley, CA.
  14. De Risi, M.T., Ricci, P., Verderame, G.M. and Manfredi, G. (2014), "A nonlinear macro model for numerical simulation of exterior RC joints without transverse reinforcement", Second European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, August.
  15. De Risi, MT., Ricci, P., Verderame, G.M. and Manfredi, G. (2016), "Experimental assessment of unreinforced exterior beam-column joints with deformed bars", Eng. Struct., 112, 215-232. https://doi.org/10.1016/j.engstruct.2016.01.016.
  16. Dowell, O.K., Seible, F. and Wilson, E.L. (1998), "Pivot hysteresis model for reinforced concrete members", ACI Struct. J., 95, 607-617.
  17. Earthquake Engineering Research Institute (EERI) (1994), Northridge Earthquake. January 17, 1994. Preliminary Reconnaissance Report, Oakland, California.
  18. Earthquake Engineering Research Institute (EERI) (1999), The Chi-Chi, Taiwan Earthquake of September 21, EERI Special Earthquake Report.
  19. Earthquake Engineering Research Institute (EERI) (1999a), The Tehuacan, Mexico, Earthquake of June 15, EERI Special Earthquake Report.
  20. Eligehausen, R., Ozbolt, J., Genesio, G., Hoehler, M.S. and Pampanin, S. (2006), "Three-dimensional modelling of poorly detailed RC frame joints", Proceedings of the New Zealand Society for Earthquake Engineering Conference, Paper No. 23.
  21. Fan, G., Song, Y. and Wang, L. (2014), "Experimental study on the seismic behavior of reinforced concrete beam-column joints under various strain rates", J. Reinf. Plast. Compos., 33(7), 601-618. https://doi.org/10.1177/0731684413512706.
  22. Favvata, M.J., Izzuddin, B.A. and Karayannis, C.G. (2008), "Modelling exterior beam-column joints for seismic analysis of RC frame structures", Earthq. Eng. Struct. Dyn., 37(13), 527-1548. https://doi.org/10.1002/eqe.826.
  23. FEMA-356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Building", Federal Emergency Management Agency, Washington, DC.
  24. Filiatrault, A., Lachapelle, E. and Lamontagne, P. (1998), "Seismic performance of ductile and nominally ductile reinforced concrete moment resisting frames I Experimental study", Can. J. Civil Eng., 25(2), 331-341. https://doi.org/10.1139/l97-097.
  25. Filiatrault, A., Lachapelle, E. and Lamontagne, P. (1998), "Seismic performance of ductile and nominallyductile reinforced concrete moment resisting frames II Analytical study", Can. J. Civil Eng., 25(2), 342-352. https://doi.org/10.1139/l97-097.
  26. Fujii, S. and Morita, H. (1991), "Comparison between interior and exterior RC beam-column joint behavior. Design of beam-column joints for seismic resistance (SP-123)", Special Publication, 123, 145-166.
  27. Ghobarah, A. and Biddah, A. (1999), "Dynamic analysis of reinforced concrete frames including joint shear deformation", Eng. Struct., 21(11), 971-987. https://doi.org/10.1016/S0141-0296(98)00052-2.
  28. Giberson, M.F. (1969), "Two nonlinear beams with definitions of ductility", J. Struct. Div., 95(2), 137-157. https://doi.org/10.1061/JSDEAG.0002184.
  29. Hassan, W.M. and Moehle, J.P. (2012), "A cyclic nonlinear macro model for numerical simulation of beam-column joints in existing concrete buildings", Proceedings of the 15th World Conference of Earthquake Engineering, Lisbon, Portugal, 24-28.
  30. Hwang, S.J., Hung-Jen, L., Liao, T.F., Kuo-Chou, W. and Tsai, H.H. (2005), "Role of hoops on shear strength of reinforced concrete beam-column joints", ACI Struct. J., 102(3), 445-453.
  31. Kaku, T. and Asakusa, H. (1991), "Ductility estimation of exterior beam column sub assemblages in reinforced concrete frames", ACI Special Publication, 123, 167-186.
  32. Kim, J. and LaFave, J.M. (2007), "Key influence parameters for the joint shear behaviour of reinforced concrete (RC) beam-column connections", Eng. Struct., 29(10), 2523-2539. https://doi.org/10.1016/j.engstruct.2006.12.012.
  33. Lima, C., Martinelli, E. and Faella, C. (2012), "Capacity models for shear strength of exterior joints in RC frames: State-of-the-art and synoptic examination", Bull. Earthq. Eng., 10(3), 967-983. https://doi.org/10.1007/s10518-012-9340-4.
  34. Lowes, L.N. and Altoontash, A. (2002), "Modeling the response of reinforced concrete beam-column joints", J. Struct. Eng., 1686-1697.
  35. Meinheit, D.F. and Jirsa, J.O. (1981), "Shear strength of R/C beam-column connections", J. Struct. Div., 107(11), 2227-2244. https://doi.org/10.1061/JSDEAG.0005819.
  36. Ning, C.L., Yu, B. and Li, B. (2016), "Beam-column joint model for nonlinear analysis of non-seismically detailed reinforced concrete frame", J. Earthq. Eng., 20(3), 476-502. https://doi.org/10.1080/13632469.2015.1104759.
  37. Noguchi, H. and Kashiwazaki, T. (1992), "Experimental studies on shear performances of RC interior column-beam joints", 10th World Conference on Earthquake Engineering, 3163-3168.
  38. Omidi, M. and Behnamfar, F. (2015), "A numerical model for simulation of RC beam-column connections", Eng. Struct., 88, 51-73.
  39. Otani, S. (1974), "Inelastic analysis of R/C frame structures", J. Struct. Div., 100(7), 1433-1449. https://doi.org/10.1061/JSDEAG.0003821.
  40. Pampanin, S., Calvi, G.M. and Moratti, M. (2002), "Seismic behavior of RC beam-column joints designed for gravity only", Proceedings of the 12th European Conference on Earthquake Engineering, London.
  41. Pampanin, S., Magenes, G. and Carr, A. (2003), "Modelling of shear hinge mechanism in poorly detailed RC beam-column joints", fib 2003 Symposium on Concrete Structures in Seismic Regions, Athens, Greece.
  42. Pantelides, C.P., Hansen, J., Nadauld, J. and Reaveley, L.D. (2002), "Assessment of reinforced concrete building exterior joints with substandard details", PEER Report, 18, Berkeley, CA.
  43. Parate, K. and Kumar, R. (2016), "Investigation of shear strength models for exterior RC beam-column joint", Struct. Eng. Mech., 58(3), 475-514. https://doi.org/10.12989/sem.2016.58.3.475.
  44. Parate, K. and Kumar, R. (2019), "Shear strength criteria for design of RC beam-column joints in building codes", Bull. Earthq. Eng., 17(3), 1407-1493. https://doi.org/10.1007/s10518-018-0492-8.
  45. Parate, K. and Kumar, R. (2019), "Shear strength model for reinforced concrete beam-column joints based on hybrid approach", Comput. Concrete, 23(6), 377-398. https://doi.org/10.12989/cac.2019.23.6.377.
  46. Park, S. (2010), "Experimental and analytical studies on old reinforced concrete buildings with seismically vulnerable beam-column joints", University of California, Berkeley.
  47. Park, S. and Mosalam, K.M. (2013), "Simulation of reinforced concrete frames with nonductile beam-column joints", Earthq. Spectra, 29(1), 233-257. https://doi.org/10.1193/1.4000100.
  48. Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons, New York.
  49. Raffaelle, G.S. and Wight, J.K. (1995), "Reinforced concrete eccentric beam-column connection subjected to earthquake-type loading", Struct. J., 92(1), 45-55.
  50. Raffaelle, G.S., Gentry, T.R., & Wight, J.K. (1992). "Earthquake loading on R/C beam-column connections", Tenth World Conference on Earthquake Engineering, Rotterdam: Balkema. July.
  51. Sagbas, G., Vecchio, F.J. and Christopoulos, C. (2011), "Computational modeling of the seismic performance of beam-column subassemblies", J. Earthq. Eng., 15(4), 640-663. https://doi.org/10.1080/13632469.2010.508963.
  52. Sharma, A., Eligehausen, R. and Reddy, G.R. (2011), "A new model to simulate joint shear behavior of poorly detailed beam-column connections in RC structures under seismic loads Part I: Exterior joints", Eng. Struct., 33(3), 1034-1051. https://doi.org/10.1016/j.engstruct.2010.12.026.
  53. Sharma, A., Eligehausen, R. and Reddy, G.R. (2013), "Pivot hysteresis model parameters for reinforced concrete columns, joints, and structures", ACI Struct. J., 110(2), 217.
  54. Sharma, A., Reddy, G.R. and Vaze, K.K. (2012), "Shake table tests on a non-seismically detailed RC frame structure", Struct. Eng. Mech., 41(1), 1-24. https://doi.org/10.12989/sem.2012.41.1.001.
  55. Shayanfar, J., Bengar, H.A. and Niroomandi, A. (2016), "A proposed model for predicting nonlinear behavior of RC joints under seismic loads", Mater. Des., 95, 563-579. https://doi.org/10.1016/j.matdes.2016.01.098.
  56. Shin, M. and LaFave, J.M. (2004), "Modeling of cyclic joint shear deformation contributions in RC beam-column connections to overall frame behavior", Struct. Eng. Mech., 18(5), 645-670. https://doi.org/10.12989/sem.2004.18.5.645.
  57. Shin, M. and LaFave, J.M. (2004), "Testing and modelling for cyclic joint shear deformations in RC beam-column connections", Proceedings of the Thirteenth World Conference on Earthquake Engineering, August.
  58. Takeda, T., Sozen, M.A. and Nielsen, N.N. (1970), "Reinforced concrete response to simulated earthquakes", J. Struct. Div., 96(ST12), 2557-2573. https://doi.org/10.1061/JSDEAG.0002765.
  59. Teng, S. and Zhou, H. (2003), "Eccentric reinforced concrete beam-column joints subjected to cyclic loading", Struct. J., 100(2), 139-148.
  60. Unal, M. and Burak, B. (2013), "Development and analytical verification of an inelastic reinforced concrete joint model", Eng. Struct., 52, 284-294. https://doi.org/10.1016/j.engstruct.2013.02.032.
  61. Uzumeri, S.M. (1977), "Strength and ductility of cast-in-place beam-column joints", American Concrete Institute Annual Convention, Symposium on Reinforced Concrete Structures in Seismic Zones, San Francisco.
  62. Watanabe, K., Abe, K., Murakawa, J. and Noguchi, H. (1988), "Strength and deformation of reinforced concrete interior beam-column joints", Trans. JPN Concrete Inst., 10, 183-188.
  63. Wong, H.F. and Kuang, J.S. (2008), "Effects of beam-column depth ratio on joint seismic behaviour", Proc. Inst. Civil Eng.-Struct. Build., 161(2), 91-101.