• Journal of Welding and Joining
• /
• v.4 no.3
• /
• pp.50-57
• /
• 1986

In this study, the experiments were earried out for the purpose of the clarifying the optimum metal arc spraying conditions, such as spraying distance, wire feed speed, arc current, etc, by using the stainless steel wire ER 308L. Main results obtained are as follows: 1. Optimum spraying distance is closely related to the equilibrium temperature of base material in back surface. 2. The size fused metal particles is increased according to the temperature of fused metal. 3. The maximum adhesion strength of coatings is obtained under the optimum spraying conditions of which the temperature of fundamental is maximum.

• Journal of the Korean institute of surface engineering
• /
• v.22 no.1
• /
• pp.26-42
• /
• 1989

It has between investigated that the optimum spaying conditions, such as, spraying distance, fusing temperature and fusing time, ect, in a Ni-cr base self fluxing alloy sprayed on the mild steel substrate by oxygen-acetylenc flame spraying. Sprayed specimens on various conditions were fuused in a vacuum furnace and the results were as follows. The optimum spraying condition for excellent coating layer are obtained under spraying distances, fusing temperature and fusing and time ; 180~240mm,1050~110$0^{\circ}C$and 15~30min, respectively. The adhesive strength and surface hurface hardness of the as sprayed specimens were very low by mechanical bonding becaus of the diffusion layer during process. The carbides and borides and formed in the sprayed coating layer and densification of the layer was resulted from the elimination of pores and oxides. The hardness of sprayed coating layer, particularly in the high temperature, was superior to ordinary tool steels.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.19-22
• /
• 2000

This study was carried out investigate the storability of onions on calcium spraying, after cutting foliage, 6 different treatemnt , the dilution spraying of calcium nitrate 9 3%, 6%) , calcium carbonate(3%, 6%), dust scattering and the controls were evaluated for rotting, sprouting, healthy bulb and total weight loss ratio during storage. Rotting ratio on the dilution spraying of 6% calcium carbonate was lower than that of the control after 4 months storage by 16.7%. Sprouting and total weight loss were decreased in the dilution spraying of 6% calcium carbonate.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.236-237
• /
• 2006

Cold spraying is a fairly new coating technique, which within the last decade attracted serious attention of research groups and spray companies. As compared to thermal spraying, the low process temperatures in cold spraying result in unique coating properties, which promise new applications. Since particles impact with high kinetic energy in the solid state, new concepts to describe coating formation are requested to enable the full potential of this new technology. The present contribution gives a brief review of current models concerning bonding, supplying a description of the most influential spray parameters and consequences for new developments. With respect to spray forming by cold cold spraying, microstructures and thick, further machineable structures are presented.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.223-231
• /
• 1999

The one of basic functional conditions of suspended overhead sprayer, which is openly made use of irrigating on bedding plants in greenhouse, is to be kept the growing uniformity of bedding plants by making uniformly the spraying irrigation depending on the distribution of sprayed water. This study was performed to find out the optimum position of sector formed injection nozzle which is placed from the top of plant 0 the tip of the nozzle to keep spraying uniformity. The test of spraying distribution using a overhead sprayer, which was installed in a row of sector formed injection nozzles, was performed The measuring factor to represent spraying distribution was the water weight filled in each cup when the overhead sprayer was moving across the upside of the cups which were placed directly under the nozzles on keeping the distance from nozzle tip. The test results were as following , The standard mr of weights of each cup filled with spraying water was lower values at Position far from more than 60cm under nozzle tip. The driving speed variation of sprayer was not effected on spraying uniformity but the spraying water weight was inversely proportioned to the speed. To make best spraying uniformity, it was represented that the tip of the nozzle is positioned to keep the distance which the top of plants is placed at the second cross point of each injection sector of nozzles.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.6
• /
• pp.460-464
• /
• 2017

As increasing thermal efficiency of the gas turbine, the performance improvement of thermal barrier coatings is also becoming important. Ytrria stabilized zirconia(YSZ) is the most popular materials for ceramic top coating because of its low thermal conductivity. In order to enhance the performance of thermal barrier coatings for hot sections in the gas turbine, suspension plasma spraying was developed in order to feed nano-sized powders. YSZ coatings formed by suspension plasma spraying showed better performance than YSZ coatings due to its exclusive microstructure. In this research, two YSZ coatings were deposited by suspension vacuum plasma spraying at 400 mbar and 250 mbar. Microstructures of YSZ coatings were analyzed by scanning electron image(SEM) on each spraying conditions, respectively. Crystalline structure transformation was not detected by X-ray diffraction. Thermal conductivity of suspension vacuum plasma sprayed YSZ coatings were measured by laser flash analysis. Thermal conductivity of suspension vacuum plasma sprayed YSZ coatings containing horizontally oriented nano-sized pores and vertical cracks showed $0.6-1.0W/m{\cdot}K$, similar to thermal conductivity of YSZ coatings formed by atmospheric plasma spraying.

• Journal of Biosystems Engineering
• /
• v.27 no.2
• /
• pp.143-150
• /
• 2002

Several researches for site-specific weed control have tried to increase accuracy of weed detection with machine vision technique. However, there is a problem which needs substantial time to perform site-specific spraying. Therefore, new technology for real-time precision spraying system is needed. This research was executed to develope the new technology to estimate weed density and size in real time, and to conduct a real-time site-specific spraying. It would effectively reduce herbicide amounts applied for a crop field. The real-time precision spraying system consisted of a Differential Global Positioning System (DGPS) with an error of 2 cm, a machine vision system, a geomagnetic sensor for correction of view point of CCD camera and an automatic sprayer with separately controlled nozzle. The weed density was calculated with comparison between position information and a pre-designed electronic map. The position information was obtained in real time using the DGPS and the machine vision. The electronic map contained a position database of crops automatically constructed when seeding. The developed system was tested on an experimental field of Seoul National University. Success rate of the spraying was about 61%.

• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.179-182
• /
• 1998

Boron carbide coating has some very attractive properties for nuclear and semiconductor industry. The potential of atmosheric plasma spray as manufacturing methods for $B_4C$ coating was discussed. In this work, the boron carbide coating with low porosity, high microhardness and good life of thermal shock resistance was deposited by the control of spraying distance. The relationship between the properties of $B_4C$ coatings and their spraying distance was studied.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.43-52
• /
• 2014

Recent developing tendency of thermal spray for green automotive industry are studied by searching of NDSL, KIPRIS, ScienceDirect and so on. Spraying techniques such as plasma spray, microwave treatment, dry-ice blasting, HVOF thermal spray, cold spraying, aerosol deposition are introduced, further more spraying materials such as nano particles, intermetallic compound, TiAlN, TiC, Si-Al alloys are investigated.

• Journal of agricultural medicine and community health
• /
• v.9 no.1
• /
• pp.18-26
• /
• 1984

With the increase of using pesticides, pesticide poisonings become more frequent. In the previous epidemiological study on pesticide poisoning and the reports of the authorities concerned, it is carefully affirmed that pesticide poisonings are caused by farmers' ignorance and negligence in using the pesticides. But the pesticide poisoning should be taken into account in terms of the person who sprays the pesticides, its spraying process, farming style and farmers' socio-economic conditions. And based on the understanding mentioned above, preventive measures for pesticide poisoning should be established. In this socio-medical point of view, this study examined the public health problems caused by using pesticides and the treatment of pesticide poisoning, based on the interviews with farmers in a area of Kyunggi-Do about the spraying process of pesticides, poisoning experiences and its treatments. The results are as follows ; 1) The style of spraying pesticides in the target area is mostly an individual one, not cooperative one. And the subjects of spraying are householders, whose educational backgrounds are beneath notice. More than 2~5 of the subjects are women or old men of 60 years old or so. These are seen to derive from the socio-economic status of Korean agricultural families; their younger generation's moving to greater cities and their petty farming styles. 2) As for the safety measures for the spraying of pesticides, those which have nothing to do with the economic, problems such as efficient spraying and productivity, are well obeyed. On the other hand, some safety measures as the use of safety devices, and spraying time, the degree of dilution of pesticides and the spraying method In windy days, are not obeyed very well, for to keep those makes spraying difficult to do and productivity worse. These facts indicate that the safety measures for using pesticides must be directly concerned with the spraying process, farming style and farmers' socio economic status, rather than the subject's knowledge or carefulness. 3) Even In cases of poisoning they do rarely consult the doctors. This is caused by the problem of their locality and transportation since one should pass away a day even in the busiest season to consult doctors, and by their low socio-economic status. 4) The epidemiological studies on pesticide poisonings should be necessarily led to a socio-medical one which are concerned together with the spraying process of pesticides, farming style, farmer's socio-economic status and discrepancies in public health policies between agricultural communities and urban ones.