• 융합신호처리학회논문지
• /
• 제24권4호
• /
• pp.249-254
• /
• 2023

최근 드론을 활용한 농약 살포 임무로 농민들의 작업 시간을 절약하고 농약 및 인체 유해성으로부터 보호되어 드론 보급이 활성화되고 있다. 기존 농약 살포 방식인 광역방제기와 헬기 방제에서 파생된 여러 단점 보완이 가능하다. 최근에는 스마트팜 확대 정책으로 IoT 기반의 다양한 작물의 생육 정보를 실시간 모니터링하고 핵심 변수에 대한 빅데이터 수집을 통해 최적의 생육 환경을 구축하여 수확 증대를 통한 농민의 수익 창출에 적극 활용되고 연관 드론 산업 기술도 발전되고 있다. 본 연구에서는 농업응용 분야의 다양성을 확보하기 위해서 비닐하우스 차광을 위한 작업에 드론을 적용하였고 차광막 살포와 관련된 기술 구현을 구체화하기 위하여 비닐하우스 환경에 대한 기초 연구를 실시하였다. 비닐하우스의 내부와 외부 환경을 고려하여 양질의 빛을 제공하기 위해 드론 노즐의 균일 살포를 위한 노즐설계, 비닐하우스의 투광률 분석, 차광제 도포 실험을 통하여 드론을 활용한 차광임무가 가능하도록 하는 기초연구를 수행하였다.

• 농촌의학ㆍ지역보건
• /
• 제25권2호
• /
• pp.245-263
• /
• 2000

본 연구는 자기기입식 설문조사를 통해 농약살포를 대부분 담당하는 남성 농민들에 대하여, 농부증을 포함한 만성증상과 농약살포시의 이상증상경험, 이상증상 경험시 살포한 농약, 농약살포시의 안전수칙 준수, 보호구의 착용실태, 가족 중 농약으로 인한 사고경험을 조사하고, 농약노출과 연관된 변수들간의 연관성, 급성중독경험 및 만성증상과 관련된 요인을 고찰하였다. 만성증상으로는 '몸이 나른하고 힘이 없다', '허리가 아프다'. '밤중에 소변을 보기 위해 깬다' 등의 증상이 많았으며, 농약살포 시의 임상증상 경험율은 '피부발진/가려움증', '어지러움/두통'의 경우가 가장 높은 것으로 조사되었다. 또한, 조사 대상자의 7.1%가 가족중 농약으로 인한 사고경험이 있는 것으로 조사되었으며, 이중 농약살포시 중독, 안전사고 및 자살사례를 확인할 수 있었다. 농약살포 시의 준수사항 중, '뿌린 후 목욕을 한다'와 '뿌린 후 바로 옷을 갈아입는다' 등의 경우가 준수율이 높았으나, '보호구를 잘 세탁해서 보관한다', '뿌린 후 용변을 볼 경우 손을 씻는다', '한낮에는 뿌리지 않는다' 등의 경우는 낮은 준수율을 보였다. 농약살포시 보호구는 '물에 타서 살포할 경우', '입제를 살포할 경우'에 비해 보호구를 더 잘 착용하였으며, 착용율은 모자, 장화, 마스크, 장갑, 방제복 하의의 순이었다. 농약살포시 이상증상경험과 관련된 요인은 농약살포시 준수사항 준수, 살포시간, 과수재배, 경작면적, 연간 농약살포일 등이었으며, 농민의 만성증상과 관련된 관련된 요인은 농약살포시 이상증상 경험, 경작면적, 농사경력, 농약살포시 준수사항 준수, 전업여부, 농약에 대한 노출 등이었다. 본 연구결과를 통해 농약살포시 준수사항의 준수율과 보호구 착용율을 높이며 농약으로 인한 안전사고를 방지하기 위한 체제적인 교육 및 홍보가 필요함을 알 수 있다. 또한, 농약에 대한 노출이 농민의 만성증상의 한 원인이라는 결론을 내리기는 어려우나, 원인적 연관성일 가능성을 배재할 수는 없을 것으로 생각되며, 따라서, 농약노출을 정확히 산출하고, 좀더 명확한 건강영향의 생물학적 지표(biological marker)를 측정하여 이들의 연관성을 고찰하는 연구가 이루어져야 할 것으로 생각된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.260-265
• /
• 2006

An experimental study on the catalytic reformer adopted in the auxiliary power unit system of solid oxide fuel cell was conducted. A 3-fluid nozzle, by which liquid fuel such as diesel, water and air are sprayed and uniformed mixed, was designed and used in this study. An electrically heated monolith inserted in the reformer was used for the vaporization of fuel and water in the transient state of reformer. The reformer uses the partial oxidizing reaction at the catalyst and the supply of water prevents the flame combustion in the spraying zone and lessens the deactivation of catalyst. The result showed that the reforming of liquid fuel can be started by the electrically heated monolith and the 3-fluid nozzle can give the uniform mixing of fuel, water and air. It was also found that the reformer fueled by n-hexadecane can make the reformate, at best, containing $H_2$ at 15.5% and CO at 11.5% that are used as fuel in the solid oxide fuel cell.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.5-12
• /
• 2015

In recent years, it had focused on the improvement of paper properties by addition of NFC (Nano-fibrillated Cellulose). Although the addition of NFC to wet-end of papermaking process could be suggested as a new solution to improve the strength properties of paper, it was not possible to avoid the bad drainage caused by the added NFC's chocking pores of wet web. Instead of the direct addition to wet-end, spraying of NFC to web in wire-section was tried in this study and evaluated by checking various paper properties including surface smoothness, tensile strength, folding endurance and stiffness. According to the increase of spraying amount of NFC, above mentioned paper properties were enhanced without excessive deterioration of drainage. Compared with direct introduction to wet-end, spraying could be regarded as a more proper method to enhance the surface smoothness and strength properties of paper.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.643-648
• /
• 2004

Most of shoes manufacturing processes are not yet automated, which puts restrictions on the increase of productivity. Among them, adhesive application processes particularly are holding the most workers and working hours. In addition, its working conditions are very poor due to the toxicity of adhesive agents. In case of automating adhesive application processes by using robots, the robot teaching by playback is difficult to produce high productivity because the kinds of shoes to be taught mount up to several thousands. Therefore, it is essential to generate the robot working paths automatically according to the kind, the size, and the right and left of shoes, and also to teach them to the robot automatically. This study deals with automated adhesive spraying to shoe outsoles and uppers by using a robot, and develops the program to generate three-dimensional robot working paths off-line based on CAD data. First, the three-dimensional data of an outsole outline or an upper profiling line are extracted from the two-dimensional CAD drawing file or the three-dimensional scanner. Next, based on the extracted data and the nozzle conditions for adhesive spraying, a robot working path is generated automatically. This research work is the core in automating adhesive spraying processes, and will do much for increasing productivity of shoes manufacturing.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.200.1-200.1
• /
• 2016

Tungsten coatings on the graphite (CX-2320) were successfully deposited using the vacuum plasma spraying (VPS) method. An optimum coating procedure was developed and coating thicknesses of $409{\mu}m$ (without an interlayer) and $378{\mu}m$ (with an interlayer) were obtained with no cracks and no signs of delamination. The mechanical characteristics and microstructure of the tungsten coating layers were investigated using a Vickers hardness tester, FE-SEM, EDS, and XRD. The effect of a titanium interlayer on the properties of the tungsten coating was investigated. It was shown that the titanium interlayer prevented the diffusion of carbon to the tungsten layer, thereby suppressing the formation of tungsten carbide. Vickers hardness data yielded values that were 62.5 ~ 80.46% of those for bulk tungsten, indicating that tungsten coatings on graphite can be utilized as a plasma-facing material. High heat flux tests were performed by using thermal plasma with a maximum flux of $10MW/^2$. Vickers hardness after the heat flux test is performed to see a change in the mechanical properties. The formationof a tungsten carbide and the effect of the titanium interlayer for the diffusion barrier are investigated by using energy dispersion spectroscopy (EDS).

• 한국분무공학회지
• /
• 제21권4호
• /
• pp.195-199
• /
• 2016

Spraying of nozzles and design of tractor-attached boom sprayers have been studied for analysis of liquid spraying features. The following conclusions have been drawn. At all pressures, twin flat spray tips was finer than flat spray tips. A fine spray with VMD of 101 to 200 appeared at 1.5MPa. So, it was selected as the boom sprayer nozzle. In spraying uniformity analysis, Type B was proven to have more uniformity than Type A and Type C at 52.0 cm attached distance. Type A and Type C were proven to have more uniformity than Type B at 58.5 cm attached distance. It is concluded that these results reflect atomizing characteristics of nozzles during pest control with tractor-attached boom sprayer. Therefore, optimum setting will be putting Type C with 58.5 cm distance.

• The Plant Pathology Journal
• /
• 제25권3호
• /
• pp.270-279
• /
• 2009

During the course of a study to develop a spraying program at 15-day spray intervals, two important findings were identified allowing for further reduction of spray frequency by increasing the spray interval. In evaluating the contribution of fungicides from a 15-day spray interval program, control of white rot, which is of prime importance in Korea, was not affected, in spite of the extended spray interval caused by omitting the fungicides during the season. In another experiment assessing the duration of the protective activities of several key fungicides used in the 15-day spray interval program, infection control was maintained for almost 30 days for some fungicide. Based on these two findings, a basic spraying program with a 25-day spray interval was developed. This program was modified for four successive years to improve the control efficacy against bitter rot and Marssonina blotch, which sometimes causes as much damage as white rot.

• Journal of Welding and Joining
• /
• 제11권4호
• /
• pp.91-102
• /
• 1993

The plasma sprayed $Cr_3C_2$-NiCr coatings are widely used as wear-resistant and corrosion-resistant materials. The mechanical and wear properties of the plasma sprayed $Cr_3C_2$-NiCr coating on steel plate were examined in this study. The pore in the coatings could be classified into two types, the one is the intrinsic pore originated from the spraying powder, the other is the extrinsic pore formed during spraying. During the tensile adhesion test, the fracture occured at the interface of top coating and bond coating. It is though that the compressive residual stress increases with the increase of the top coating thickness. From the wear test, it was found that the wear rate increased with the increase of the sliding velocity regardless of the temperature. It is thought that the fracture toughness reduces with the increase of the sliding velocity at $30^{\circ}C$ and that the adhesion amount increases with the increase of the sliding velocity at $400^{\circ}C$ It is concluded that the wear mechanism at $30^{\circ}C$ is the fracture and pull-out of the carbide particles due to the fatigue on sliding surface, while the wear mechanism at $400^{\circ}C$ is the adhesion of the smeared layer formed during wear process.

• 한국결정성장학회지
• /
• 제12권5호
• /
• pp.247-252
• /
• 2002

$(Pb_{1-x}La_x)TiO_3$ (x = 0.1) 박막을 초음파분무 MOCVD법으로 ITO-coated glass 기판 위에 제조하였다. PLT 박막 제조 시 후열처리 및 seeding layer가 결정화 및 미세구조, 전기적 특성에 대한 영향을 알아보았다. 후열처리에 의하여 박막의 결정성은 향상되었고 미세구조에도 영향을 주었으며, 전기적 특성은 이들 특성의 변화에 의해서 향상되었다. 그리고 seeding layer에 의한 핵 생성자리 제공에 의하여 결정성의 향상과 grain 크기의 증가에 의하여 박막의 전기적 특성 또한 향상되었다. Seeding layer를 가지고 60분 동안 후열처리를 한 박막이 가장 우수한 전기적 특성을 나타내었으며 이 박막의 1 kHz에서 유전 상수는 213을 나타내었다.