• Asian-Australasian Journal of Animal Sciences
• /
• 제1권1호
• /
• pp.21-25
• /
• 1988

The rumen degradability of rice straw (untreated, urea-sprayed, urea-treated), grasses (Panicum maximum, Pennisetum clandestinum) and rice bran was compared. The mean in vivo organic matter digestibility of the untreated (US), urea-supplemented (SS) and urea-ammonia treated (TS) rice straw were 50.9, 53.9 and 57.4%, respectively. Rice bran contained extremely high levels of acid-insoluble ash (25.2% DM), and its OMD was 36.1%. Grasses had OMD values around 66%. Degradability measurements were performed with buffaloes using the nylon bag technique. The organic matter (OM) disappearance data were fitted to an model which was used to describe degradation pattern. The mean potentially degradable fraction for US, SS and TS was 61.5, 61.9 and 69.4%, respectively. Urea-ammonia treatment increased both the amount of OM degraded and the rate at which it was degraded in the rumen. Both grasses had similar values for degradable fraction (around 65%) and for rate constant for degradation (0.04). Rice bran contained high proportions of readily soluble material (23.9%), but the degradable OM fraction was only 13.2%. The low quality of rice bran is attributed to the contamination of rice hulls during processing.

• Asian-Australasian Journal of Animal Sciences
• /
• 제7권2호
• /
• pp.183-189
• /
• 1994

Two experiments were made. In experiment 1, four diets containing 0, 5, 15 and 25% washed seaweed meal were prepared to study the effects of incorporating seaweed meal instead of equivalent amounts of berseem leaf meal in fish feeds on growth performance and feed utilization of common carp. The results showed that average daily gain (ADG), specific growth rate (SGR%), dry matter (DM) and ether extract (EE) of the carcasses were decreased (p<0.05) with the increasing level of seaweed meal in the feeds. Inclusion of 5% seaweed meal in the diet gave the best feed conversion ratio (FCR) among all diets, however, protein productive value (PPV) and energy utilization (EU) were decreased (p<0.05) with increasing level of seaweed meal in the diet. In experiment 2, washed seaweed meal was either steam cooked or sprayed with NaOH (0.5% or 1% NaOH) and incorporated in the diets at the level of 25% instead of equivalent amount of berseem leaf meal. The results showed that steam cooked seaweed gave the best (p<0.05) growth performance, FCR and protein efficiency ratios, PER and PPV, for other treatments in descending order were NaOH treated seaweed, washed seaweed and unwashed seaweed.

• 한국환경농학회지
• /
• 제23권1호
• /
• pp.47-51
• /
• 2004

In order to know the residual pattern of pesticides and predict to the degradation period until below MRL we experimented procymidone and chlorothalonil for grape which were the most detected pesticide in grape by NAQS(National Agricultural product Quality management Service) survey. In this experiment we sprayed those pesticides 10 days before harvest and analyzed 0, 1, 2, 3, 5, 7, 10 day sample to establish logical equation and to calculate $DT_{50}$. Also the same day samples stored at $4^{\circ}C$ and $20^{\circ}C$, which were compared their degradation patterns. During the cultivating period, the residue amount of procymidone was changed from 1.85 mg/kg (0 day) to 0.33 mg/kg (10 day), $DT_{50}$ was 3.5 days, and chlorothalonil was changed from 5.5 mg/kg (0 day) to 3.49 mg/kg (10 day), $DT_{50}$ was 4.4 days. During the storage period, $DT_{50}$ of procymidone and chlorothalonil at $4^{\circ}C$ were 10.5 and 7.6 days, and 6.3 and 6.1 days at $20^{\circ}C$, respectively.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.43-47
• /
• 2002

The new core making method economizing the amount of core sand has been requested. The new method is that a core box is heated until it reaches reasonable temperature and then core sand with core binder is sprayed into the core box. Since inner temperature distribution have to be uniform in order to form uniform thickness of core, we studied inner temperature distribution of core box. First, we determined proper number of torches and optimized torch positions to minimize the average of absolute deviation(AVEDEV) of inner temperature. The results are as fellowed: 1. The number of torches that enables uniform inner temperature distribution about $300^{\circ}C$ is 25. 2. When $S_H$ and $S_V$ is 0.7, the torch positions are optimized and AVEDEV is 5.85.

• 한국표면공학회지
• /
• 제39권3호
• /
• pp.129-136
• /
• 2006

The high velocity oxy-fuel sprayed coatings of 38Ni-23Co-20Cr-11Al-3Y-5Ta, 25Ni-34Co-20Cr-11Al-3Y-2Re and 32Ni-34.5Co-22Cr-11Al-0.5Ir (in wt%) were oxidized at 1000 and $1100^{\circ}C$ in air in order to find the alloying effect of Ta, Re and Ir on the oxidation properties of the NiCoCrAlY-base coatings. The primary phase of the coatings was $Ni_3Al$. The oxides formed on the coatings consisted primarily of ${\alpha}-Al_2O_3$, together with some $CoCr_2O_4,\;CoAl_2O_4$, and $Al_5Y_3O_{12}$. Tantalum oxidized to $Ta_2O_5$ and $Ta_2O_{22}$. However, no oxides of Re and Ir were detected by XRD owing to their thermodynamic inertness and/or their small amount.

• Computers and Concrete
• /
• 제24권6호
• /
• pp.555-560
• /
• 2019

During the application of shotcrete, a part of the concrete bounces back after hitting to the surface, the reinforcement or previously sprayed concrete. This rebound material is definitely not added to the mixture and considered as waste. In this study, a deep neural network model was developed to predict the rebound material during shotcrete application. The factors affecting rebound and the datasets of these parameters were obtained from previous experiments. The Long Short-Term Memory (LSTM) architecture of the proposed deep neural network model was used in accordance with this data set. In the development of the proposed four-tier prediction model, the dataset was divided into 90% training and 10% test. The deep neural network was modeled with 11 dependents 1 independent data by determining the most appropriate hyper parameter values for prediction. Accuracy and error performance in success performance of LSTM model were evaluated over MSE and RMSE. A success of 93.2% was achieved at the end of training of the model and a success of 85.6% in the test. There was a difference of 7.6% between training and test. In the following stage, it is aimed to increase the success rate of the model by increasing the number of data in the data set with synthetic and experimental data. In addition, it is thought that prediction of the amount of rebound during dry-mix shotcrete application will provide economic gain as well as contributing to environmental protection.

• 한국입자에어로졸학회지
• /
• 제15권2호
• /
• pp.57-65
• /
• 2019

Recently, there has been much research on the effect of fine dust on human body with increasing interest in the fine dust. Thermal power plant, which is considered as one of the main sources of fine dust, is reported to be responsible for 14% of the total amount of domestic fine dust in the Republic of Korea. Therefore, dust collecting devices in the thermal power plant need to be improved. In this study, the electrostatic precipitator (ESP) was considered to substitute for a mist eliminator used in flue gas desulfurization facility. By considering real situation in the flue gas desulfurization facility, the collection efficiency of the ESP was evaluated by using the sprayed limestone slurry particles. The collection efficiency of the ESP was higher than that of the mist eliminator, showing the possibility of replacing the mist eliminator with the ESP in flue gas desulfurization facility.

• Tribology and Lubricants
• /
• 제39권1호
• /
• pp.13-20
• /
• 2023

Large drill bits may face high hardness ore and high working pressure when working. To optimize the use effect of large drill bits and prolong the use time, it is necessary to add a layer of pressure-resistant, wear-resistant, and low-friction coating on the surface of the drill bit. In this study, CoCrNiAlTi high-entropy alloy coatings and CoCrNiAlTi (70 wt%)-TiC (30 wt%) composite coatings are successfully prepared on Q235 steel by plasma spraying. The CoCrNiAlTi (70 wt%)-TiC (30 wt%) coating consists of FCC solid solution and a small amount of TiC phase. The effect of TiC on the composition phase, microhardness, and elastic modulus of HEA coating is studied by X-ray diffractometer (XRD) and microhardness tester. The effect of TiC on the friction and wear properties of HEA coatings is investigated using a wear tester. By improving the process parameters, the metallurgical bonding between the coating and the substrate is well combined, and a coating without pores and cracks is obtained. The experimental results confirm that the microhardness, elastic modulus, and wear resistance of CoCrNiAlTi-TiC composite coating are better, and the friction coefficient is lower.

• 농업과학연구
• /
• 제50권3호
• /
• pp.427-435
• /
• 2023

This study was conducted to evaluate the spraying performance according to the flight conditions of agricultural drones for the development of a variable control system. The analyzed flight conditions comprised six factors: spraying direction, flight speed, altitude, wind speed, wind direction, and rotor rotational speed. The ratio of the area sprayed on the water-sensitive paper was used as the coverage, and the distribution and amount of the coverage were evaluated. The coverage distribution based on the distance from the drone was used to evaluate a spray pattern, and the distribution was expressed as a Gaussian function approximation. In addition, the probability distribution based on coverage was expressed as the cumulative probability via Gamma function approximation to analyze the spraying efficiency in the target area. The results showed that the averaged coverage decreased significantly as the flight speed and wind speed increased, and the wind direction changed the spray pattern without a coverage decrease. This study contributes to the development of a control technique for the precision control system of agricultural drones.

• 농업과학연구
• /
• 제32권2호
• /
• pp.223-231
• /
• 2005

In order to know the residual pattern of pesticides and predict to the degradation period until below MRL, we experimented diazinon, iprodinon and chlorfenapyr for shallot. They were the most detected pesticide in shallot by NAQS (National Agricultural product Quality management Service) survey. In this experiment, we sprayed those pesticides 15days before harvest and analyzed 0, 1, 2, 3, 5, 7, 10, 14 day sample to establish logical equation and to calculate $DT_{50}$. During the cultivating period, the residue amount of diazinon was changed from 1.02 mg/kg (0 day) to 0.01 mg/kg (14 day), $DT_{50}$ was 2.19 days, and iprodione was changed from 1.45 mg/kg (0 day) to 0.14 mg/kg (14 day), $DT_{50}$ was 4.15 days, and chlorfenapyr was changed from 1.5 mg/kg (0 day) to 0.01 mg/kg (14 day), $DT_{50}$ was 1.97 days. The $DT_{50}$ of double amount in those pesticides, diazinon was 2.24 days, iprodione was 4.82 days, and chlorfenapyr was 2.24 days, respectively.