• Journal of Yeungnam Medical Science
• /
• v.24 no.2
• /
• pp.162-169
• /
• 2007

Purpose : It is well known that suspension microlaryngeal surgery produces marked increases in arterial blood pressure and heart rate. In this study, we evaluated the effects of 10% lidocaine preoperatively sprayed for attenuation of the perioperative hemodynamic response during suspension microlaryngeal surgery. Materials and Methods : Fifty American Society of Anesthesiologists (ASA) class 1 patients scheduled for excision of a vocal polyp by suspension laryngoscopy were randomly divided into two groups (n=25 for each group). They were intubated without 10% lidocaine spray (control group) or given 1.5 mg/kg of 10% lidocaine sprayed onto the pharyngolaryngeal and intratracheal sites 90 sec prior to intubation (10% lidocaine group). Anesthesia was maintained using desflurane in $O_2/N_2O$ 50%. The arterial blood pressure and heart rate were measured at preinduction (T0), 1 min (T1), 3 min (T2), 5 min (T3) after tracheal intubation, and 1 min (T4), 3 min (T5), 5 min (T6) and 10 min (T7) after the suspension laryngoscopy. Results : In the 10% lidocaine group, the arterial blood pressure and heart rate at 1 (T1), 3 (T2) min after tracheal intubation and 1 (T4), and 3 (T5) min after suspension laryngoscopy were lower than the same measurements in the control group. Conclusion : 10% lidocaine sprayed onto the pharyngolaryngeal and intratracheal sites before intubation was an effective method for attenuation of the perioperative hemodynamic response during suspension microlaryngeal surgery.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.721-729
• /
• 2014

This study was conducted to improve the consumption of floriculture plants by researching preferences of consumers for the main types of cut flowers. We analyzed the results of surveys, carried out by a company, that were largely about roses, chrysanthemums, and lilies. After departmentalizing consumers into groups and analyzing the results through conjoint and cluster analysis, we found that consumers showed a higher rate of use based on price and vase life than on flower color and flower shape in roses. The groups of rose consumers preferred a price of 1000 won, spray type flower shape, vase life of 7-8 days, and red flower color. In chrysanthemums, consumers showed higher rate of use for flower color than for vase life, flower shape, and price. The groups of chrysanthemum consumers preferred a price of 1000 won, standard flower shape, 16-20 days vase life, and yellow flower color. In lilies, consumers showed higher use rate for flower shape than vase life, price, and flower color. Lily consumers preferred a price of 2000 won, large flower shape, 4-7 days vase life, and yellow flower color. Thus, the major cut flowers (rose, chrysanthemum, and lily) all showed highest use rates in for vase life. These results highlight the importance of understanding the characteristics of consumer interests. They also emphasize that we should plan and create market-oriented and consumer-oriented products to improve the consumption of floriculture plants.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.38-43
• /
• 2010

To develop Korean native lilies as mini-potted plants, the effects of plant growth retardants on inhibiting stem elongation and improving flowering rate were evaluated. Bulblets of Lilium concolor var. parthneion (5-7 g) and L. dauricum (3-4 g fresh wt) derived from in vitro culture and then enlarged by field culture were applied with 0, 25, 50, or $100mg{\cdot}L^{-1}$ ancymidol, diniconazole, and uniconazole through bulb dipping, foliar spray, and drench. In L. concolor var. parthneion, uniconazole dipping most effectively reduced plant height by 60.7-78.3% depending on concentration compared with control without decreasing flowering percentage. In L. dauricum, dipping into diniconazole solution significantly retarded the plant height by 70.0-86.3% and improved flowering percentage by 8.3-18.2% compared to control of 0%. Drench of $25-50mg{\cdot}L^{-1}$ ancymidol was also effective on inhibition of stem elongation and improvement of flowering rate. Therefore, dipping into $50-100mg{\cdot}L^{-1}$ uniconazole solution in L. concolor var. parthneion and dipping into $25mg{\cdot}L^{-1}$ diniconazole solutions or drench of $25mg{\cdot}L^{-1}$ ancymidol in L. dauricum can be useful to produce the mini-potted plants.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1891-1894
• /
• 1999

We can classify the scratches after CMP process into micro-scratch and macro-scratches according to the scratch size, scratch intensity and defect map, etc. The micro-scratches on wafer after CMP process are discussed in this paper. From many causes, major factor that influences the formation of micro-scratch is known as particle size distribution of slurry.(1) It is indefinite what size or type of particle can cause micro-scratch on wafer surface, but there is possibility caused by large particle over 1um. The best way for controlling these large particle to inflow is to use the slurry filter on POU(Point of user). But the slurry filter(especially, depth-type filter) has sometimes the problem which makes more sever micro-scratches on wafer surface after CMP. We studied that depth-type slurry filter has what kind of week-points and the number of scratch could be reduced by lowering slurry flow rate and by using high spray bar which sprays DIW on polishing pad with high pressure.

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.217-222
• /
• 1999

The pick up impurity was studied for preparing the NiCuZn ferrite powder by a ball milling method that usually uses in the industrial ceramic process. The raw materials of NiO, CuO, ZnO, and $Fe_2O_3$ powder were weighted according to various spinel composition and mixed for 18 hrs by a wet ball milling method after that the slurry was followed by spray dried and calcined at $700^{\circ}C$ 3 hrs. The calcined NCZF powder was finally ball milled during 65 hrs as same method. The stainless steel ball and jar are used as mixing and milling equipment and the solid concentration of the slurry was 25 vol%. The impurities, stainless steel pickup, were effected by the composition of raw materials especially iron oxide, nickel oxide in the mixing process and by the rate of calcine of NiCuZn ferrite in final milling process. The empirical equation of stainless steel pickup was driven in the wet ball milling system. Finally, the composition of NiCuZn ferrite could be controlled by the empirical equation.

• Journal of Welding and Joining
• /
• v.34 no.3
• /
• pp.61-68
• /
• 2016

Characteristics of dissimilar metal welds between alloy steel ASTM A387 Gr. 91 and carbon steel ASTM A516 Gr.70 made with Flux cored arc welding(FCAW) have been evaluated in terms of microstructure, mechanical strength, chemical analysis by EDS as well as corrosion test. Three heat inputs of 15.0, 22.5, 30.0kJ/cm were employed to make joints of dissimilar metals with E91T1-B9C wire. Post-weld heat treatment was carried out at $750^{\circ}C$ for 2.5 h. Based on microstructural examination, tempered martensite and lower bainite were formed in first layer of weld metal. The amount of tempered martensite was decreased and the amount of lower bainite was increased with increasing heat input and layer. Heat affected zone of alloy steel showed the highest hardness due to the formation of tempered Martensite and lower Bainite. Tensile strengths of dissimilar welds decreased with increasing heat inputs. Dissimilar welds seemed to have a good hot cracking resistance due to the low HCS index below 4. The salt spray test of dissimilar metals showed that the corrosion rate increased with increasing heat inputs due to the increase of the amount of lower Bainite.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.83.2-83.2
• /
• 2010

평판형 고체산화물 연료전지(planar SOFC : Solid oxide Fuelcell)는 높은 전류 효율 및 출력밀도를 가지는 중,대형 발전용 전기소자이다. SOFC 스택을 600~800도에서 작동할 경우, 금속 분리판에서 휘발된 크롬에 의한 열화현상과 금속의 산화에 의한 표면 저항의 증가가 큰 문제점으로 알려져 있으며, 이를 개선하기 위한 많은 연구가 진행되고 있다. 본 연구에서는 금속 분리판의 열화를 억제하기 위한 여러 보호코팅의 특성을 밝히고, 특성차이의 원인을 분석하고자 하였다. 모재는 상용 STS444합금 (Nisshin steel 생산) 2.0mmt 박판을 사용하였으며, 표면 상태를 균일하게 하기 위하여 표면은 동일한 #1200 번 사포로 연마후 코팅하였다. 적용한 코팅은 전기도금 Ni 코팅, (MnCo)3O4 wet powder spray 코팅, (MnCo)3O4 ADM코팅 3종이었으며, 코팅층의 두께는 최적 공정조건에 따라 달리 하였다. 산화후 형성되는 표면 산화물의 전기적 특성을 평가하기 위하여 시험편의 비면적 저항 (ASR : area specific resistance)을 장시간 측정하였다. 측정편의 크기는 가로 4cm ${\times}$ 세로 4cm였으며, 100시간 공기중 산화후 측정하였다. 표면 접촉을 높이기 위하여 Pt paste를 40~50um도포하였으며, 1~0.1A인가된 전류에 대한 저항을 4전극법 (4-probe)으로 측정하였다. 표면 코팅층이 크롬 휘발을 억제하는 정도를 평가하기 위하여 크롬 휘발량을 측정하였다. 시편은 가로 1.5cm ${\times}$ 세로 1cm 였으며, 공급된 공기와 수분의 혼합가스와 응축기 표면에 흡착된 크롬의 양을 ICP-MASS법으로 측정하였다.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.454-463
• /
• 2020

The purpose of this study is to check the antimicrobial activity of terpene, a natural product-derived extract against bedding bacteria, and compare the number of bacteria detected. To this end, the number of mites and microbiological surveys were conducted on the pillows used at home to identify the presence of pathogenic strains that could cause the disease. Also, after two weeks test using pillow with terpene, a natural origin extract, the rate of reduction of fungi before and after the use of the substance and the effect of eradicating mites were evaluated. The antimicrobial activity of the terpene was observed by using the Pour plate method. The anti-mite effect was detected as weak positive (less than 100) in 2 of 4 pillows in the first test without the use of terpene. In the second experiment using a terpene, all were confirmed to be reduced to negative less than 20. The best anti-mite efficacy of terpene was found to be 20%. The purpose of this study is to suggest the possibility of developing antibacterial and anti-mite spray products for bedding using terpene.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.3
• /
• pp.37-43
• /
• 2004

Water-jet trajectory visualization and velocity deficits from a high pressurized steam-generator nozzles were experimentally observed. In order to find an optimal nozzle configuration. several parameters affecting plugging and erosion onto the steam generator tube were quantitatively analyzed. For the experiments, a high-pressurized pump (pressure in use: 200 kg/$\textrm{cm}^2$, 15 HP, 11 kW, output flow Q : 301/min) was utilized. Visualization, velocity distribution, and spray growth rate with different nozzle configurations have been mainly focused using a 2-D PDPA system. The results indicated that trajectories along the centerline regardless of their configurations has its potential core region. However, the phenomena from the peripheral part need to be meticulously considered. Accordingly, it is evident that quantitative velocity deficits at the outer region are outstanding due to the aerodynamical drag and entrainment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.1
• /
• pp.15-19
• /
• 2009

A simple and sensitive method for erythromycin quantification by liquid chromatography electrospray mass spectrometry (LC-MS/MS) in fishery products was developed. Samples were extracted by liquid-liquid extraction using 70% acetonitrile. Lipids were removed by acetonitrile saturated hexane. LC separation was performed on a Shiseido UG C-18 column ($150\;mm{\times}2.0\;mm$ internal diameter.) with a gradient system of 0.2% acetic acid-acetonitrile containing 0.2% acetic acid as a mobile phase at flow rate of 0.2 mL/min. The mass spectrometer was operated in selected reaction monitoring with positive electro-spray interface. Transitions were monitored a m/z $734{\to}577$ and $734{\to}158$, with m/z $734{\to}577$ chosen for quantification. Recovery of erythromycin from fish and shrimp fortified at the 10 ng/mL, 50 ng/mL and 100 ng/mL were 91.6-109.4%, 84.4-111.2% and 98.8-109.6% with high precision, respectively. Limits of quantification and limits of detection of erythromycin in both fish and shrimp were 10.0 ng/mL and 1.0 ng/mL, respectively. This analysis method for erythromycin has been proposed for registration in the Korean Official Methods of Food Analysis and has been utilized for fishery products analysis by the Korea Food and Drug Adminstration and the National Fisheries Products Quality Inspection Service.