• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.251-258
• /
• 1984

In order to improve the physical properties on moisture sorption of spray dried red ginseng extract powder (SD-RGEP), the various additives and coating agents were treated, and solubility, sedimentation rate and storage stability of RGEPs treated were investigated. For the moisture-proofing, additive itself was effective in the order casein>dextrin>starch>avicell, but RGEPs treated with additives were effective in the order cord oil+tween-40>starch>casein. But there was no significant difference between RGEP treated less than 1% additive and the moisture-proofing. The coating effect of AEA and CAP on RGEP could not be recognized for the moisture-proofing, whereas that of HPC, corn oil, lecithin and HPC+corn oil was proved to be very effective for the moisture-proofing of RGEP. Also it is required to control the initial moisture content of RGEP. The sedimentation rate of RGEP nontreated was 65.1 seconds, whereas that of RGEPs coated with 1% HPC, 1% corn oil, 1% lecithin and 1% HPC+0.5% corn oil was in the range of 96.2 to 114.3 seconds. The sedimentation rate of RGEPs coated was 1.5 to 1.8 times higher than that of RGEP nontreated, and there was significant difference between solubility and sedimentation rate. Therefore it was no matter for the keeping quality. The sorption rates of RGEPs coated with lecithin $(0.5{\sim}1.0%$), corn oil(0.8%) and cellulose acetate (0.8%) were ranged 54 to 56%, 51 to 55% and 52 to 54%, respectively, and it is found that the moisture-proofing effect of RGEPs coated was about 2 times higher than that of RGEP nontreated. From the result of storage experiment during 3 months under the maltreated condition of $48{\pm}2^{\circ}C$, 75% RH, the moisture sorption of RGEPs coated with corn oil$(0.5{\sim}1.0%$), cellulose acetate(DES, $0.5{\sim}0.8%$) and lecithin (DES, 1.0%) was not at all observed. Therefore it is considered that the circulating period of RGEPs coated with these coating agents could to give more than 3 years.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.75-79
• /
• 2005

There were three trials involved in this experiment. All piglets in Trial 1 were randomly distributed into the following 4 treatments. Treatment 1. Corn-soybean diet with 5% SDPP. The tryptophan level was 0.237%. Treatment 2. Corn-soybean diet with 10% meat and bone meal. The tryptophan level was 0.177%. Treatment 3. Treatment 1+0.0662% synthetic tryptophan. The total tryptophan level was 0.303. Treatment 4. Treatment 2+0.0662% synthetic tryptophan. The total tryptophan level was 0.236. Piglets in Trial 2 were distributed randomly into the following 4 treatments. Treatment 1: corn-soybean diet+10% meat and bone meal. The total tryptophan level was 0.176%. Treatment 2: corn-soybean diet+10% meat and bone meal+5% SDPP. The total tryptophan level was 0.180%. Treatment 3: Treatment 1 diet+0.004% synthetic tryptophan. The total tryptophan level was 0.180%. Treatment 4: Treatment 1 diet+0.631% synthetic tryptophan. The total tryptophan level was 0.237%. There were 4 treatments in Trial 3. Treatment 1: cornsoybean diet+10% meat and bone meal. The total tryptophan level was 0.176%. Treatment 2: Treatment 1 diet+0.061% synthetic tryptophan. The total tryptophan level was 0.237%. Treatment 3: Treatment 2 diet+0.061% synthetic tryptophan. The total tryptophan level was 0.298%. Treatment 4: corn-soybean diet+10% meat and bone meal+5% SDPP. The total tryptophan level was 0.180%. The results of Trial 1 showed that the piglets ate significantly more (p<0.05) when feed included SDPP in the diet during the first 2 weeks. The feed intake also increased when synthetic tryptophan was added in the 5% meat and bone meal diet; however, the difference did not reach a significant level (p>0.05) during the first 2 weeks. Three weeks onwards the feed intake of 5% meat and bone meal treatment was significantly lower (p<0.05) than for the other three treatments. The results of Trial 2 showed that the feed intake could be significantly improved only when the total tryptophan level reached 0.237%. Piglets in the 5% SDPP treatment had higher feed intake than piglets in 10% meat and bone meal treatment with 0.180% of tryptophan, but did not reach a significant level (p<0.05). Body weight gain also had the same trend as feed intake. The pigs in Treatment 1, the lowest total level of tryptophan treatment (0.176%), had lowest feed intake and weight gain, but the difference did not reach a significant level (p>0.05). The pigs in Treatment 1 of Trial 3 had the lowest feed intake and weight gain (p>0.05). Treatment 2 (0.237%) had the highest average feed intake from Week 1 to Week 5; the second best result was recorded in Treatment 4. As for the weight gain of the piglets in Treatment 4 (5% SDPP), they had a higher average weight during the first 3 weeks. The feed efficiency was better for Treatment 4 (5% SDPP) during the first 2 weeks. The results of these trials showed that both SDPP and tryptophan had a trend to improve the feed intake and weight gain.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1126-1126
• /
• 2001

The paper presented here is the initial part of a larger study, in which it was determined which quality parameters in cheese powder could already be predicted by NIR at an early stage in the process and which could only be predicted at the final stages of the process. This initial study was performed in order to establish the levels and nature of variation within and between batches such that the subsequent data collection could be tackled optimally. The perspectives evolved into more than was originally planned and revealed some interesting uses of NIR-technology. Cheese powder production starts as a batch process, where waste cheese from other dairies is melted down in a vat. The process then turns into a continual process as the vat is emptied and the melted cheese is then filtered, homogenized, pasteurized and finally spray dried. Between each batch the powder is to a greater or lesser degree a mixture of 2 batches. This paper is divided into 2 aspects, one regarding the optimization of sampling time and the other is a study of process dynamics. Optimizing sampling time This initial study included 9 powder samples from 9 different batches produced during one day. The raw materials for the batches were chosen with the aim of creating a relatively high level of variation in the data. The total of 81 samples were taken out at regular intervals and spectra were collected on a NIR-systems 6500 instrument. The subsequent reduction of the data by PCA to score values shows the power of NIR as a tool to determine not only when samples are representative of a certain batch, but also which batches are stable enough to include in a further study. Studying process dynamics To take this experiment a step further 1 of the 81 samples were sent to the laboratory for further analyses. The samples were chosen on the criteria that they covered the spectral variation in the dataset. These samples were analysed for 4 chemical components and 5 physical attributes, which are essential for describing the quality of the product. The latent structure of the 7 samples, using the chemical and physical variables, is totally comparable to the latent structure of the NIR spectra. This outcome makes it possible to describe the dynamics of one day's production both chemically and physically with relatively little resources. Additionally it raises the question as to whether reference values are needed, as the latent structure of the NIR-spectra appears to be sufficient in providing information on the quality of the product. To be able to use NIR in this way would require defining quality limits in the principal component space as opposed to each of the reference values. The potential of NIR applied in an explorative fashion with batch processes opens a whole new gateway for the use of this technology. This study explains yet again after so many years in the field “why I'm crazy about NIR!”.

• Korean Journal of Food Science and Technology
• /
• v.48 no.4
• /
• pp.317-322
• /
• 2016

A pesticide mix solution containing difenoconazole, lambda-cyhalothrin, and lufenuron was applied 3 times on field grown chili pepper at a fivefold overdose dilution concentration of the spray solution at a pre-harvest interval of 7 day. Difenoconazole, lambda-cyhalothrin, and lufenuron were detected at 4.43, 0.334, and 1.56 mg/kg, respectively, in raw chili pepper. Washing with water reduced the residue levels to 91.4, 94.3, and 85.3%, respectively. In dried chili pepper, the residues of difenoconazole, lambda-cyhalothrin, and lufenuron were 22.2 mg/kg (processing factor, Pf =5.01), 1.65 mg/kg (Pf =4.94), and 6.54 mg/kg (Pf =4.19). In the seeds, difenoconazole and lambda-cyhalothrin were not detected, and lufenuron was detected at 0.0075 mg/kg (n=1) and <0.005 mg/kg (n=2). Thus the pesticide residues in the seeds was negligible. In the seed oil, difenoconazole and lufenuron residues were 0.0263 and 0.0295 mg/kg, respectively (concentration factors=5.26 and 4.72). These concentration factors supported the theoretical concentration factor of 6.8, assuming that all of compound present in the seed are transferred into the oil.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.8
• /
• pp.1167-1173
• /
• 2009

This study was conducted to evaluate the effects of providing fermented soy protein to weaned pigs on nitrogen balance and apparent fecal and apparent ileal digestibility (AID) of AA. Four weaned ((Yorkshire${\times}$Landrace)${\times}$Duroc) barrows (BW = 6.58${\pm}$0.98 kg), surgically fitted with a simple T-cannula approximately 15 cm prior to the ileo-cecal junction, were fed four diets according to 4${\times}$4 Latin square design. Diets were a basal diet supplemented with one of the following: 3% SDPP (spray dried plasma protein), 5% RBP (soy protein fermented by Lactobacillus spp.), 5% PSP (soy protein fermented by Aspergillus oryzae and Bacillus subtilis), and 2.5% RPP (2.5% RBP+2.5% PSP). No differences were observed in DM and N intakes among treatments. However, the level of urine excretion was greater in the RPP group than in the PSP group. Additionally, fecal DM excretion, fecal N concentration and fecal N excretion were increased in the RBP, PSP and RPP groups when compared with the SDPP group (p<0.05). Furthermore, total excretion was increased in the RPP group when compared with the PSP group (p<0.05). In addition, N absorption and the N absorption ratio were higher in the SDPP group than in the RPP group (p<0.05). Moreover, the DM and N digestibilities were lower in the RBP, PSP and RPP groups than in the SDPP group (p<0.05), and the ash and energy digestibilities were higher in the SDPP and RBP groups than in the PSP and RPP groups (p<0.05). However, no significant differences were observed in the DM, N, Ash, Ca, P or ileal digestibilities among treatments, although the energy digestibility was higher in the SDPP group than the RBP group (p<0.05). In addition, the apparent ileal digestibilities of essential amino acids (Arg, His, Iso, Leu, Lys, Phe, Thr, and Val) were significantly higher in the SDPP group than in the other groups (p<0.05), and the levels of Ala, Cys, Glu and Try were greater in the SDPP treatment group than the RBP, PSP and RPP groups (p<0.05). Additionally, the levels of Asp, Gly and Ser were higher in the SDPP group than the PSP and RPP groups, and the level of Pro was higher in the SDPP group than the RPP group (p<0.05). Finally, total non-essential amino acid and total amino acid digestibility were higher in the SDPP group than in the other treatments (p<0.05). Taken together, the results of this study indicate that animal protein is more bioavailable than plant protein. However, the N absorption ratio and ileal digestibility were found to be similar in the SDPP and RBP groups.

• Korean Journal of Food Science and Technology
• /
• v.38 no.4
• /
• pp.488-494
• /
• 2006

This study was carried out in order to investigate the feasibility of utilizing concentrated sunmul (soybean curd whey), which is a waste by-product of soybean curd processing, as a functional food ingredient. Sunmul Powder was concentrated by ultrafiltration and spray dried with or without dextrin. Oil adsorption capacity of UF retentate powder was similar to that of ISP (Isolated Soy Protein) and higher than that of sunmul powder, whereas water holding capacity of UF retentate powder was lower than that of ISP. Protein solubility of all types of UF retentate powder was significantly higher than that of ISP at pH 2.0-10.0 with the lowest protein solubility seen at pH 4.0 and solubility increasing as the conditions became more acidic or alkaline. Emulsifying activity indexes of UF retentate powder at pH 2.0-10.0 were not influenced by pH. Emulsion stability of 4% sunmul solution was lowest at pH 4.0, but that of UF retentate powder was higher at acidic pH values and decreased with increasing pH. Foaming capacities of sunmul and UF retentate powder were high at pH 4.0-6.0, but the foam of UF retentate powder disappeared within 20 minutes in all conditions of pH.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.11
• /
• pp.1632-1638
• /
• 2016

A study was conducted to compare the endogenous basal losses of phosphorus (EBLP) in pigs fed diets containing gelatin (GEL) or spray-dried porcine plasma (SDPP) as protein sources and to determine the standardized total tract digestibility (STTD) of phosphorus (P) in SDPP. The trial was carried out at the Federal University of Santa Maria, Brazil. Twelve castrated pigs with an initial body weight of 55 kg were individually allotted in metabolic crates during two 12-day periods, each with 7 days of adaptation and 5 days of total fecal collection. The beginning and the end of the collecting periods were determined according to the marker-to-marker approach, using ferric oxide as an indigestible marker. Pigs were submitted to four semi-purified diets, one being a P-free diet with 30% of GEL as the protein source and three were diets with 10%, 20%, and 30% inclusion of SDPP respectively. Data were subjected to analysis of variance and the model included the effects of period, animal and treatments; the results of the three diets with increased levels of SDPP were subjected to linear regression analysis. The intercept of the relation of between ingested P and absorbed P represented the EBLP, while the slope indicated the STTD of P in SDPP. The EBLP means obtained by P-free diet and regression method were compared with the Student t test. The EBLP were 128.95 mg/kg dry matter intake (DMI) and 153.63 mg/kg DMI (standard error = 77.0; p<0.06) using the P-free diet with GEL as the protein source and the regression method, obtained with diets containing increased levels of SDPP, respectively. The apparent digestibility of P was 87.9%, 94.2%, and 92.9% for the treatments containing 10%, 20%, and 30% inclusion of SDPP, respectively. The estimated STTD of P obtained with the linear regression was 97.4%. When the EBLP estimated by the P-free diet was used to corrected the apparent digestibility of P in diets containing SDPP, the STTD of P in SDPP was 96.9%, 98.8%, and 95.9% for 10%, 20%, and 30% SDPP, respectively. Therefore, it can be concluded that SDPP can replace GEL to estimate the endogenous losses of P. In addition, the STTD of P in SDPP estimated with the P-free diet was 97.2% and it was 97.4% by the regression method, utilizing SDPP.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.54-59
• /
• 2010

Instantized thin gruels have been popular to supplement patients who want nutritional, ready-to-eat, and easy-to-use products. In this study, rice-based thin gruels were developed by use of gelatinized rice powder which was manufactured by extrudating rice in a twin-screw extruder. Subsequently, the rice paste from the extruder were dried and ground into fine powder. The gelatinized rice powder was mixed with the powders of various grains, soy beans, nuts, oil seeds, and vegetables to formulate the instantized thin rice gruel with well-balanced nutrients (mixed powder). The mixed powder was granulated to improve reconstitution capability in a fluid bed spray granulator (granulated powder). Lipid and protein contents were higher by 0.9 and 1.9%, respectively, in the granulated powder whereas carbohydrate content was higher by 3.2% in the mixed powder. The calculated dispersibility was 93.7 and 77.0% for the granulated and the mixed powders, respectively. The reconstitution time was 122.3 and 305.3 for the granulated and the mixed powders, respectively. In conclusion, the granulation of the mixed powder improved the dispersibility. This study will be helpful to develop a variety of processed rice products and promote rice process industry.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.502-510
• /
• 2021

The objective of this study was to develop a novel ticagrelor-loaded self-nanoemulsifying drug delivery system with an enhanced solubility and dissolution rate. Numerous oils and surfactants were screened, then medium chain triglyceride (MCT) oil and the surfactants polyoxyethylene sorbitan monooleate (Tween 80) and Labrafil M1944CS were selected for the preparation of the ticagrelor-loaded self-nanoemulsifying drug delivery system. A pseudo-ternary phase diagram was constructed to detect the nanoemulsion region. Of the various formulations tested, the liquid SNEDDS, composed of MCT (oil), Tween 80 (surfactant), and Labrafil M1944CS (cosurfactant) at a weight ratio of 20/70/10 produced the smallest emulsion droplet size (around 20.56±0.70 nm). Then, particle size, polydispersity, and zeta potential were measured using drugs containing liquid SNEDDS. The selected ticagrelor-loaded liquid SNEDDS was spray-dried to convert it into a ticagrelor-loaded solid SNEDDS with a suitable inert carrier, such as silicon dioxide, calcium silicate, or magnesium aluminometasilicate. The solid SNEDDS was characterized by scanning electron microscopy, transmission electron microscopy, and in vitro dissolution studies. SEM, PXRD, and DSC results suggested that amorphous ticagrelor was present in the solid SNEDDS. Also, the solid SNEDDS significantly increased the dissolution rate of ticagrelor. In particular, the emulsion particle size and the polydispersity index of the solid SNEDDS using silicon dioxide (SS1) as a carrier was the smallest among the evaluated solid SNEDDS, and the flowability and compressibility result of the SS1 was the most suitable for the manufacturing of solid dosage forms. Therefore, solid SNEDDS using silicon dioxide (SS1) could be a potential nano-sized drug delivery system for the poorly water-soluble drug ticagrelor.

• Korean Journal of Hazardous Materials
• /
• v.2 no.1
• /
• pp.18-26
• /
• 2014

We analyzed the demand of competent authorities requiring adequate technical information for initial investigation of chemical accidents. Reflecting technical reports on chemical accident response by environmental agencies in the U.S. and Canada, we presented information on environmental diffusion and toxic effects available for the first chemical accident response. Hydrogen fluoride may have the risk potential to corrode metals and cause serious burns and eye damages. In case of inhalation or intake, it could have severe health effects. The substance itself is inflammable, but once heated, it decomposes producing corrosive and toxic fume. In case of contact with water, it can produce toxic, corrosive, flammable or explosive gases and its solution, a strong acid, may react fiercely with a base. In case of hydrogen fluoride leak, the preventive measures are to decrease steam generation in exposed sites, prevent the transfer of vapor cloud and promptly respond using inflammable substances including calcium carbonate, sodium bicarbonate, ground limestone, dried soil, dry sand, vermiculite, fly ash and powder cement. The method for fire fighting is to suppress fire with manless hose stanchions or monitor nozzles by wearing the whole body protective clothing equipped with over-pressure self-contained breathing apparatus from distance. In case of transport accident accompanied with fire, evacuation distance is 1,600m radius. In cae of fire, fire suppression needs to be performed using dry chemicals, CO₂, water spray, water fog, and alcohol-resistance foam, etc. The major symptoms by exposure route are dyspnoea, bronchitis, chemical pneumonia and pulmonary edema for respiration, skin laceration, dermatitis, burn, frostbite and erythema for eyes, and nausea, diarrhea, stomachache, and tissue destruction for digestive organs. In atmosphere, its persistency is low, and its bioaccumulation in aquatic organism is also low.