• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.41-49
• /
• 1997

Laser spot welding offers a unique combination of high speed. precision and low heat distortion, compared with conventional resistance spot welding. This combinatin of advantages is especially attractive for the automotive industry. Until now automobile fabrication is widely used resistance spot welding, however, because of geometric and structural problem, spot welding is required many welding machine in that reason by substituting spot welding with laser welding, it save the equipment cost. In the present study we measured ultimate strength and observed bead cross section of laser welded specimen and compared with that of the resistance spot welding results in order to adapt laser welding in automobile industry. Also for strength esti- mation we calculated the residual stress of laser welded zone. All calculations are performed with the ABAQUS code on a workstation.

• 대한기계학회논문집A
• /
• 제27권3호
• /
• pp.387-392
• /
• 2003

The mechanical behavior of two rectangular spot-welded plates under bending is investigated in detail. The equivalent thickness of spot-welded plates is introduced in this study and used in explaining the results. The focus of the analysis is to evaluate the effect of spot-welding from the view point of equivalent thickness. The investigation of deflection has been performed as comparing the result from finite element analysis with the measured data of the spot-welded plates for various parameters, such as aspect ratio, area ratio, and distance ratio of spot-welding points. The effect of spot-welding is as large as 62%(at r=1.0) when the area ratio of spot-welding point is just 4.52%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.175-180
• /
• 2001

In real structure, multi-point spot welded joints are more frequently used than a single-point spot welded joint. Most researches, however, have been focused to a single-point spot welded joint until now. In this paper, the fatigue behavior of multi-point spot welded joints are investigated both experimentally and analytically using the finite elements. The local strain approach is used rather than the stress intensity factor approach to estimate the fatigue life since the former is quite simple and straightforward. It is found that the fatigue behavior of multi-point spot welded joints is different from that of single-point spot welded joints. The local strain approach is still applicable to multi-point spot welded joints.

• 한국식물병리학회지
• /
• 제14권5호
• /
• pp.473-483
• /
• 1998

This paper is the sixth report about the fungal diseases of economic resource plants observed newly in Korea. It contains short descriptions on symptoms, occurrence conditions, pathogens, and some phytopathological notes for each of 10 fungal plant diseases. They are identified as circular leaf spot of Ligustrum ovalifolium by Cercospora adusta, leaf spot of Viola spp. by c. violae, leaf spot of Trifolium repens by C. zebrina, hypophyllous leaf sot of Angelica gigas by Passalora depressa, brown leaf spot of Euonymus japonicus by Pseudocercospora destructiva, brown leaf spot of Lonicera japonica by P. lonicericola, brown leaf spot of Parthenocissus tricuspidata by P. vitis, black spot of Echinops latifolius by Ramularia cynarae, leaf spot of Petasites japonicus by R. major, and leaf spot of Plantagoasiactica by R. plantaginis, respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제12권1호
• /
• pp.35-39
• /
• 2006

Fifty-six indigenous and twenty nine exotic mulberry varieties were screened against powdery mildew, Myrothecium leaf spot, Pseudocercospora leaf spot, sooty mold and bacterial leaf spot for a period of three years under field condition. The percent disease index (PDI) was recorded during peak season of the foliar diseases. Out of eighty-five varieties studied, ten varieties were highly resistant and eight were resistant to powdery mildew; six varieties were immune and seventy-eight varieties were highly resistant to Myrothecium leaf spot; sixty varieties were highly resistant and 21 were resistant to Pseudocercospora leaf spot; forty four varieties were highly resistant to sooty mold and two varieties were immune and fifty-eight were highly resistant to bacterial leaf spot. Lowest cumulatative disease index was observed in M. multicaulis (7.28) followed by Thailand lobed (7.85) and Italian mulberry (8.06).

• 한국측량학회지
• /
• 제9권2호
• /
• pp.103-113
• /
• 1991

SPOT 수치영상자료를 이용한 지상좌표 계산 과정에서 지상기준점 및 검사점 입럭좌표의 정확도는 계산 결과의 신빙성에 커다란 영향을 준다. CRT 모니터상에 직접 나타난 SPOT 원초 영상은 일반적으로 지상물체의 판별과 점위치 결정에 적합하지 않으므로 전체영상의 대비개선, 영상소보간, 경계선강조, 공간필터처리 등 적절한 영상처리 기병의 적용이 필요하다. 본 연구에서는 대상지역의 3차원 위치 결정과 파장대특성분석에 이용되는 SPOT 위성영상의 시각분석에 필요한 수치영상처리기법의 원리를 고찰하고, 그 적용을 위한 알고리즘을 개발하여 프로그래밍 하였으며, 실제 P-mode 및 XS-mode의 SPOT 영상을 이용하여 고해상도 천연색영상인 SPOT P＋XS 영상으로 합성하였다.

• 한방안이비인후피부과학회지
• /
• 제9권1호
• /
• pp.16-24
• /
• 1996

In order to satisfy the demand of good treatment of Oriental medicine, I investigated many books mentioned about Liver spot. The results were as follows: 1. They have called the Liver spot many other terms in the oriental medicine. 2.. The Liver spot is facial disease, so it is deeply related with yang-myong kyong(陽明經) 3. As the external cause of the Liver spot, wind and fire evil have been emphasized. 4. Intoxication of bud of banha(半夏) poison and alcohol absorption can be one of the causes. 5. As the internal cause of the Liver spot, each other vapour asthenia fever from constipation seven modes of emotion, asthenia of the spleen and stomach and insufficiency of kidney-yin(腎陰) 6. Nowadays, the deficiency of kidney-yang(腎陽) is also included as the cause of the Liver spot. 7. Many oriental doctors have talked about the relationship between the Liver spot and women, but I can't find any concrete talking about the relationship between menstration and the Liver spot, pregnancy and the Liver spot. 8. They have administrated many other herb medicines for the treatment the Liver spot.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.619-625
• /
• 2006

The study was intended to investigate production tools and conditions of oil spot following calculating optimal composition of oil spot tenmoku glaze which can be produced at 1250$\sim$l260$^{\circ}C$. Since oil spot is influenced by the viscosity of glaze, viscosity of various glazes fit for oil spot production was determined by an SciGlass 6.0-based calculating method. Applied amount and calcinating conditions of the resulting substance of oil spot, $Fe_2O_3$, were analyzed. As a result, the viscosity of the glaze durable at 1260$^{\circ}C$ was found to range from 4.2 to 4.4, natural cooling was used after oxidizing calcinations at 1260$^{\circ}C$ for an hour, and the best oil spot tenmoku was produced by the natural cooling process after 1 h calcinations at 1150$^{\circ}C$ in the middle of natural cooling. Also, the study showed that thickness of glaze was found to have an effect on the production of oil spot and resulting oil spot was filled mostly with $Fe_2O_3$.

• 소성∙가공
• /
• 제23권5호
• /
• pp.282-288
• /
• 2014

It is difficult to control welding variables during spot welding of non-ferrous metals like aluminum because of the low electrical resistance of the material. It has been suggested that a solid state welding process such as friction stir spot welding or extru-spot welding can be used to spot weld aluminum plates. In the extru-spot welding, there is a need to increase the weld strength by improving the shape of the welding die. The current study shows that the weld strength for an extru-spot welding can be increased by using a pin placed on the inside of the upper electrode in the welding die. In the current study, the deformed shape of the insert rivet and the stress distribution in the welding zone were analyzed by simulation. Extru-rivet spot welding experiments were performed by changing the height of pin on the inside of the upper electrode. From the experimental result, it is shown that the weld strength for an extru-rivet spot welding can be increased by adjusting the height of the pin. The optimal shape of the deformed rivet after the extru-rivet spot welding can be observed from the simulation results. The deformed shape of the insert rivet can also be controlled by the height of pin.

• 대한토목학회논문집
• /
• 제12권1호
• /
• pp.151-158
• /
• 1992

항공사진보다 경제적인 SPOT 위성의 입체영상으로부터 지형도를 제작하는 것이 가능하게 되었다. 많은 학자들이 국가기본도 수정에의 적용가능성과 결과의 정확도를 분석하여 SPOT 영상은 1/50,000에서 1/100,000까지의 지형도에 적합하다고 발표하였다. SPOT 영상으로부터 지형도, 정사사진 및 수치지형모델을 제작하기 위해서는 정확한 외부표정요소를 알아야 하지만, 동적인 선형주사 영상인 SPOT 영상의 특성 때문에 사진측량에서 이용되어온 종래의 번들조정은 직접 사용되지 못한다. 신뢰성은 내적신뢰성으로 불리는 과대오차의 검출능력과 외적신뢰성으로 불리는 검출되지 않은 과대오차가 외부표정 결과에 미치는 영향을 나타낸다. 본 연구에서는 좌표계, 궤도방향 좌표의 표현방법, 외부표정 요소의 차수 및 기준점 배치에 따라 SPOT 영상의 신뢰성이 어떻게 달라지는가를 밝히고, SPOT 영상을 이용한 작업에서의 기초자료로 제공될 수 있는 외부표정에서의 이론적인 신뢰성을 분석하였다.