• 약학회지
• /
• 제27권3호
• /
• pp.235-243
• /
• 1983

In the present study, in attempt was made to observe the effect of lipid components in pantocrin and antler velvet and sponge layers extracts on the aldolase activity in the rat spinal nerves. The antler chloroform-methanol (2:1) extracts are known to be composed of neutral lipids, cholesterol, cerebrosides, spingomyelin, phosphatidyl choline, phosphatidyl ethanolamine, phosphatidyl serine and gangliosides. The antler extracts were studied on the aldolase activity in the rat spinal nerves. The aldolase activity was measured by the method of Lehninger. To investigate the components of tile extracts which affect the enzyme activity, the chloroform-methanol (2:1) extracts of antler were fractionated into petroleum ether soluble and insoluble fractions and their effects on the enzyme activity were compared. It was found that the chloroform-methanol (2:1) extracts of the antler sponge and velvet layers as well as those petroleum ether soluble fractions obtained from the chloroform-methanol (2:1) extracts, decrease the aldolase activity by 18-23%. However, pantocrin showed increasing effect on the aldolase activity by 42.6%. The petroleum ether insoluble fraction of the chloroform-methanol (2:1) -extract showed no significant increasing activity (about 13%) on the spinal nerves aldolase. The components of pantocrin ind the petroleum ether insoluble fractions were attempted to analysize by thin layer (silica gel) and gas liquid chromatography.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1775-1781
• /
• 2008

가교제의 종류가 헬리콥터 연료탱크의 자기밀폐층 소재로 적용시키기 위한 천연고무 스폰지의 팽윤에 미치는 효과를 조사하였다. 과산화물과 황을 섞은 가교방식과 과산화물에 의한 가교방식을 채택하였다. 천연고무 콤파운드를 Kneader와 Roll-Mill을 활용하여 제조하고, 고압조건의 프레스에서 부분 가교시킨 후 대기압의 금형에서 발포와 완전가교를 실시하였다. 얻어진 스폰지의 겉보기밀도를 측정하고 스폰지의 셀구조를 주사전자현미경을 통하여 관찰하였다. 톨루엔, 이소옥탄과 항공유를 사용하여 실온에서 팽윤실험을 실시하였다. 용매에 2분 동안 침적 후 얻어지는 부피팽윤비 값은 과산화물 가교에 의한 천연고무 스폰지가 비슷한 양의 황과 과산화물의 혼합가교에 의한 경우보다 높았다. 스폰지의 겉보기밀도와 셀구조는 과산화물 함량에 매우 민감하였으며 이는 또한 천연고무 스폰지의 팽윤거동에 영향을 미쳤다. 천연고무 스폰지가 연료와 접촉하여 신속한 팽윤이 얻어지기 위하여 금형에서 동시에 발생하는 두 가지 반응인 발포제의 분해반응과 천연고무의 가교반응을 적절히 조절하는 것이 중요하다.

• 한국환경과학회지
• /
• 제25권6호
• /
• pp.817-827
• /
• 2016

The resistance in series model has been frequently used for determination of various filtration resistance to correctly understand the membrane fouling behaviour in MBR (membrane bio-reactor) for wastewater treatment. The cake layer resistance ($R_c$) which is commonly determined by calculation of flux dataset that are obtained empirically before and after removing the cake layer on membrane surface. However, the calculated Rc values are very dependent on the cleaning methods adapted for removal of cake layer. This study investigated how the various cleaning options affect $R_c$. Seven different cleaning methods were employed: i) ultrasonication (100 W, 10 min), ii) ultrasonication (200 W, 60 min), iii) ultrasonication (400 W, 120 min), iv) water rinsing in a shaker (100 rpm, 10 min), v) water rinsing in a shaker (300 rpm, 60 min), vi) water rinsing, vii) sponge scrubbing. For the hydrophilic PES membrane, the cake layer removal efficiencies ranged from 64% to 10%, indicating that the removal of cake layer was highly dependent on the cleaning options. For the hydrophobic PVDF membrane, the cake layer removal efficiencies ranged from 79% to 97%. Consequently, a standardized method for cake layer removal to determine cake resistance ($R_c$) is needed for correct interpretation of the fouling phenomena.

• 멤브레인
• /
• 제15권3호
• /
• pp.198-205
• /
• 2005

방사능 오염도 측정에 사용하기 위한 이중구조 고분자막이 폴리설폰과 세륨활성화된 이트륨실리케이트(CAYS)를 이용하여 제조되었다. 제조된 막은 순수 고밀도 고분자 지지층과 이에 제막된 고분자 용액의 상전환 공정에 의해 고형화된 CAYS 함침 활성층의 이중구조로 구성된다. 제막공정에서 대기방치 공정이 생략되었을 때 CAYS를 포함하는 활성층은 전형적인 비대칭 구조를 지니며, CAYS 입자들이 고분자 구조 사이에 박혀있는 형상을 지닌다. 제막공정에서 대기에 방치하는 시간이 증가할수록 막의 형상은 스폰지 구조를 띠며 CAYS는 고분자 구조로부터 분리되어 막 내부에 셀 같은 공간에 밀집되어 존재함을 보였다. 한편, 두 충 사의 계면형상은 고분자 고형화 과정에서의 상전환 속도와 밀접한 관련되었으며, 대기방치 시간의 증가에 따라 계면의 구분이 뚜렷하게 나타나지 않았다. 방사능 탐지 특성에서 스폰지 구조를 지니는 막의 고분자 구조는 방사성핵종이 통과할 수 없는 밀집된 형상을 지니면서 탐지효율의 감소를 초래하는 것으로 나타났다.

• KSBB Journal
• /
• 제21권6호
• /
• pp.439-443
• /
• 2006

조직공학에서 생체재료의 생체적합성과 조직재생능력은 생체재료가 생체에 적합한지를 판단하는 가장 중요한 요소이다. 콜라젠은 인체조직을 이루는 주된 단백질이고, GAGs은 조직의 미세환경을 결정짓는 주요한 요소로 알려져 있다. 본 연구에서는 1형 콜라젠 스폰지를 탈수 열처리 (A군)하고 EDC로 가교결합한 것 (B군)과 CS를 첨가하여 EDC로 가교결합한 군 (C군)의 스폰지 형태의 콜라젠 지지체을 제조하였다. 제작된 콜라젠 스폰지를 3 mm의 디스크 형태로 토끼 각막의 실질부위에 주머니형태로 이식하였다. 8주 동안 각막의 신생혈관 생성, 혼탁, 지지체의 투명도 정도를 확인하고, 2주, 4주, 8주 후에 적출하여 염증과 각막 섬유모세포의 이동을 확인하였다. 모든 군에서 염증, 신생혈관 생성, 혼탁은 일어나지 않았다. 그러나 CS가 첨가된 콜라젠 스폰지에 섬유모세포의 이동이 많았고, 이식물의 투명도가 증가하였다. 1형 콜라젠 스폰지는 각막 간질에의 생체적합성이 뛰어나 각막 간질로의 대체 가능성이 크고, CS가 첨가된 1형 콜라젠 스폰지는 조직공학적 생인공각막의 재구성에 큰 도움을 줄 것으로 기대된다.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1998년도 Proceedings of UNESCO-internetwork Cooperative Regional Seminar and Workshop on Bioassay Guided Isolation of Bioactive Substances from Natural Products and Microbial Products
• /
• pp.89-94
• /
• 1998

Marine sponges are recognized as a plentiful source of diverse biologically active secondary metabolites. Recently, we have initiated a research to discover antitumor constituents from the marine sponges collected from Korean Waters. Marine sponges collected from the South Sea of Korea were screened for several biological activities including such as brine shrimp lethality and cytotoxicity. Significant brine shrimp lethality was detected in the crude extract of a two-sponge association of Poecillastra sp. and Jaspis sp. A cross-section of this sample showed two layers of morphologically distinct sponges. The thin and dirty yellow outer layer was identified as Poecillastra sp. (Pachastrellidae), the surface of which was very rough. The light-grey inner layer was identified as Jaspis sp. (Jaspidae), the surface of which was smooth. This two-sponge association appears to be consistent as these sponges were always found in associated form regardless of collection site or collection period. Investigation of the bioactive constituents monitored by brine shrimp lethality assay led to the isolation of pectenotoxin II (PTX2) and psammaplin A as causative compounds for the brine shrimp lethality. $^1$H- and $\^$13/C-nmr signals of PTX2 was fully assigned utilizing TOCSY, HETCOR, Long-range HETCOR, and Homonuclear J-resolved 2D experiments. PTX2 displayed very potent and selective cytotoxicities in the 60 cell line panel antitumor assay at the NCI. PTX2 has progressed to acute toxicity determination and in vivo antitumor assay at the NCI (Table 1). However, significant in vitro antitumor activity of PTX2 can not be affirmed in the in vivo assay.

• Journal of Periodontal and Implant Science
• /
• 제31권1호
• /
• pp.1-23
• /
• 2001

Chitosan is biodegradable natural polymer that has been demonstrated its ability to improve wound healing, and calcium metaphosphate(CMP) is a unique class of phosphate minerals having a polymeric structure. In this study, chitosan/CMP and platelet derived growth factor(PDGF-BB) loaded chitosan/CMP sponges were developed, and the effect of the sponges on bone regeneration and their possibility as scaffolds for bone formation by three-dimensional osteoblast culture were examined. PDGF-BB loaded chitosan/CMP sponges were prepared by freeze-drying of a mixture of chitosan solution and CMP powder, and soaking in a PDGF-BB solution. Fabricated sponge retained its 3-dimensional porous structure with $100-200\;{\mu}m$ pores. The release kinetics of PDGF-BB loaded onto the sponge were measured in vitro with $^{125}I-labeled$ PDGF-BB. In order to examine their possibility as scaffolds for bone formation, fetal rat calvarial osteoblastic cells were isolated, cultured, and seeded into the sponges. The cell-sponge constructs were cultured for 28 days. Cell proliferation, alkaline phosphatase activity were measured at 1, 7, 14 and 28 days, and histologic examination was performed. In order to examine the effect on the healing of bone defect, the sponges were implanted into rat calvarial defects. Rats were sacrificed 2 and 4 weeks after implantation and histologic and histomorphometrical examination were performed. An effective therapeutic concentration of PDGF-BB following a high initial burst release was maintained throughout the examination period. PDGF-BB loaded chitosan/CMP sponges supported the proliferation of seeded osteoblastic cells as well as their differentiation as indicated by high alkaline phosphatase activities. Histologic findings indicated that seeded osteoblastic cells well attached to sponge matrices and proliferated in a multi-layer fashion. In the experiments of implantation in rat calvarial defects, histologic and histomorphometric examination revealed that chitosan/CMP sponge promoted osseous healing as compared to controls. PDGF-BB loaded chitosan/CMP sponge further echanced bone regeneration. These results suggested that PDGF-BB loaded chitosan/CMP sponge was a feasable scaffolding material to grow osteoblast in a three-dimentional structure for transplantation into a site for bone regeneration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.263-266
• /
• 2003

In this paper, we have proposed a realization method of tactile sense of virtual objects using multi-layer Neural Networks(NN). Inputs of the NN are position data of non-rigid objects and outputs of the NN are forces at that time and point. First, the position and forte data are measured from non-rigid objects (a sponge and a balloon) using two PHANToMS, one as a master and the other as a slave manipulator, then the data are used to train a multi-layer Neural Networks whose inputs and outputs are designed to represent tactile information. The trained Neural Networks is used to regenerate the tactile sense on the virtual objects graphically made by a computer, and one can feel a quite similar sense of touch by using the system while touching the virtual objects.

• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.30-37
• /
• 2000

Wet porous media representing agronomic soil that contains variable water content with variable electrolyte concentration was measured to study the shape of the curves of the electric double layer capacitance versus frequency (from 10 KHz to 10 MHz. This was done in an attempt to find the lowest practical operating frequency for developing low cost dielectric constant soil moisture probes. Cellulose sponge was used as the porous media. A high frequency electronic bridge circuit was developed for measuring the equivalent network parallel resistance and capacitance of porous media. It appears that the effects of the electric double layer component of the total parallel network capacitance essentially disappear at operating frequencies greater than approximately 25 MHz at low electrolyte concentrations but are still important at 50 MHz at higher concentrations. At these frequencies, the double layer capacitance masks the diffusion region capacitance where true water content capacitance values reside. The general shape of the curve of volumetric water content versus porous media dielectric constant is presented, with an empirical equation representing data for this type of curve. It was concluded that the lowest frequency where dielectric constant values which represent true water content information will most likely be found is between 30 and 50 MHz at low electrolyte concentrations but may be above 50 MHz when the total electrolyte concentration is near the upper level required for most mesophyte plant nutrition.

• 생약학회지
• /
• 제30권3호
• /
• pp.314-319
• /
• 1999

The composition of biochemical components such as lipids, proteins and their amino acid components and inorganic elements in the ashes in unossified antlers from Cervus nippon Temminck var. mantchuricus grown in Korea were analyzed to obtain fundamental data for quality control. As a result, it was found that total lipids were 20.75% which was approximately similar contents with those of proteins (21.8%). Sixteen amino acids were identified from the hydrolysate of the protein fraction. Three gangliosides with very similar TLC patterns of those such as $GM_3$, $GM_1$ and $GM_{1a}$ were identified from the water soluble layer of Folch's partitions. Ash contents were revelaed to be much higher in the sponge layer (40.0%) than in the velvet layer (3.7%).