• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.7-10
• /
• 2000

The soft x-ray(10nm-100nm) interferometer is a modified Mach-Zehnder type interferometer and it consists of two beam-splitters and four totally reflecting mirrors. The beam-splitters used here are 50% transmission and 50% reflection grating type. The diffraction patterns of beam splitters(1st B.S.) were investigated with a He-Ne laser. The diffraction patterns produced by the soft x-ray interferometer (2nd B.S.) were also investigated in intensities positions. The diffraction patterns of 20 degree grazing incidence on the beam splitters(1st B.S.) show a circular array of spots. Both the reflected and the transmitted beams show the same patterns but symmetric circles on the screen. The maximum intensity appears roughly when n is in the zeroth and odd orders and the suppressed peak(missing order) appears when n is in even orders. Intensities of 3 center fringes(n = 0, $\pm$1) are stronger than others. These results confirm the reduced grating equation and make agree with the intensity distribution function. It was found that the final patterns produced by the soft x-ray interferometer (2nd B.S.) consisted of fine fringes which were caused by two of three diffraction beams that were arrived at the second beam-splitter.

• 한국광학회지
• /
• 제12권4호
• /
• pp.320-326
• /
• 2001

본 논문에서는 출력 도파로의 한쪽 폭을 변화 시켜 다양한 광파워 분리비를 갖는 비대칭형 Y-분리기를 BK7 유리에 $Ag^+-Na^+$이온교환법을 이용하여 제작하였다. FD-BPM을 이용하여 한쪽 출력 도파로의 폭에 따라 다양한 출력 파위를 얻을 수 있는 비대칭형의 Y-분리기의 도파특성을 살펴보았다. 그리고 이온교환에 의해 형성된 채널형 도파로의 굴절률 분포를 결정하고 채널형 도파로를 제작하여 도파특성도 살펴보았다. 비대칭형 Y-분리기는 한 쪽 도파로의 폭을 $4{\mu}m$에서 $6{\mu}m$까지 변화시키면서 제작하고 특성을 파악하였다.

• Wind and Structures
• /
• 제23권1호
• /
• pp.45-57
• /
• 2016

Open-cross-section composite beam (OCB) tends to suffer vortex-induced vibration (VIV) due to its bluff aerodynamic shape. A cable-stayed bridge equipped with typical OCB is taken as an example in this paper to conduct sectional model wind tunnel test. Vortex-induced vibration is observed and maximum vibration amplitudes are obtained. CFD approach is employed to calculate the flow field around original cross sections in service stage and construction stage, as well as sections added with three different countermeasures: splitters, slabs and wind fairings. Results show that flow separate on the upstream edge and cause vortex shedding on original section. Splitters can only smooth the flow field on the upper surface, while slabs cannot smooth flow field on the upper or lower surface too much. Thus, splitters or slabs cannot serve as valid aerodynamic means. Wind tunnel test results show that VIV can only be mitigated when wind fairings are mounted, by which the flow field above and below the bridge deck are accelerated simultaneously.

• Transactions on Electrical and Electronic Materials
• /
• 제4권6호
• /
• pp.21-27
• /
• 2003

Methods of calculation of polarizers and splitters for visible spectra based on a multi-layer dielectric system are considered. Practical formulas for calculation are given. For example the cases of a splitter calculation when R$\_$s/ > 70% and R$\_$p/$\leq$ 30% or R$\_$s/=R$\_$p/ were considered. The formulas of the effective layers method are of practical use. The optical characteristics of calculated and fabricated polarizers and splitters for 650nm and 780nm wavelengths are presented.

• 대한전자공학회논문지SD
• /
• 제38권8호
• /
• pp.34-42
• /
• 2001

본 논문에서는 다중모드 간섭이론(MMI : multimode interference)을 $Ag^+-Na^+$ 이온교환 방식에 적용하여 BK7 유리에 1${\times}$2, 1${\times}$4, 1${\times}$8 MMI 광파워 분리기를 설계 제작하였다. 소자를 제작하기 전에 채널형 도파로의 굴절률 분포와 MMI 광파워 분리기의 다중모드 영역의 폭과 다중모드 영역의 길이를 결정하였다. 다중모드 영역의 길이는 1${\times}$2 MMI : 887${\mu}m$, 1${\times}$4 MMI: 1666${\times}$, 1${\times}$8 MMI : 1834${\mu}m$이고, 다중모드 영역의 폭은 1${\times}$2 MMI : 40${\mu}m$, 1${\times}$4 MMI : 80${\mu}m$, 1${\times}$8 MMI : 120${\mu}m$였다. 제작된 소자들은 1.50~1.58${\mu}m$파장 범위 내에서 1${\times}$2 MMI의 경우 1.4dB, 1${\times}$4 MMI의 경우 1.7dB, 1${\times}$8 MMI의 경우 약 2dB의 광파워 불균형비를, 그리고 손실은 1${\times}$2 MMI의 경우 0.96[dB}, 1${\times}$4 MMI의 경우 2.29[dB], 1${\times}$8 MMI의 경우 1.67[dB]였다.

• 정보통신설비학회논문지
• /
• 제4권2호
• /
• pp.29-36
• /
• 2005

All-optical fiber-type $2{\times}32$ splitters for an Ethernet PON (passive optical network) were fabricated by using a FBT (fiber biconical tapered) process and the performance of the splitters was tested in upstream transmission of the EPON system. The $2{\times}32$ splitters was obtained by cascading $1{\times}4$ splitters fabricated by a conventional FBT process and showed -18 dB of insertion loss with 1.5 dB uniformity of output power at each channel and -0.1 dB of polarization dependent loss. The insertion loss variation was below 0.1 dB at the temperature range of $-40^{\circ}C\;to\;80^{\circ}C$. For upstream channel transmission test in the EPON system were a Zig board and a burst mode receiver. Zenko-made optical module was used for the burst mode receiver by adding functions of serializer/deserializer and clock data recovery, a Virtex II pro20 chipset and Vitesse VSC7123 were used in the Zig board for characterizing the burst mode and in the clock data recovery chipset, respectively. Startup acquisition lock time and data acquisition lock time were measured to be 670ns and 400ns, respectively, in the upstream channel transmission of the EPON system adapting the $2{\times}32$ splitter fabricated in this work.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1067-1073
• /
• 2011

본 연구에서는 생활폐기물 관로이송 설비에 사용되고 있는 원심송풍기의 성능향상을 위해 임펠러날개 압력면과 부압면 측에 스플리터를 각각 설치하고, 스플리터의 코드길이 변화에 따른 성능특성을 삼차원 나비어-스톡스 방정식을 이용한 수치해석으로 분석하였다. 수치해석을 통한 기초연구를 바탕으로 날개 부압면측에서 발생하는 역류현상을 억제할 수 있는 스플리터의 익간설치를 고려하였으며, 주요설계 변수로는 코드길이를 설정하였다. 이를 통해 날개 부압면 측에 설치한 스플리터의 코드길이가 길어질수록 원심송풍기 압력 및 효율특성이 설계유량 조건 뿐만 아니라 유량증가에 따라 향상됨을 알수 있었다. 설계유량 조건에서 스플리터 부착 원심송풍기에 의해 효율 및 압력은 기존대비 각각 4% 및 18% 향상되었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.298-299
• /
• 2001

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1994년도 추계학술발표회
• /
• pp.69-78
• /
• 1994

The broadband Power Splitters and Tap-Offs are needed to transmit a number of channels of signals with the high quality of signals. In this paper the design theories and analysis of the theoretical frequency characteristics of the Wilkinson's Power Splitters and Tap-Offs are reviewed. Then it has been showned that the theoretical frequency characteristics of the proposed compensated Wilkinson's Power Splitter and Tap-Off are improved much in comparison with the prototype wikinson's Power Splitter and conventional weakely-coupled Tap-Off. Furthermore the measured results of frequency characteristics for the fabricated circuits show agreement with the theoretical results and hence the validity of the proposed design and analysis methods has been confirmed.

• ETRI Journal
• /
• 제18권4호
• /
• pp.287-299
• /
• 1997

Integrated-optic polarization controlling devices such as polarizers, polarization splitters, and polarization converters, are proposed and demonstrated in nonlinear optic polymers. Poling-induced birefringence in electro-optic polymers is exploited to fabricate the devices. The polymeric waveguide polarizers show low excess losses, and extinction ratios of 20.7 dB and 17.1 dB for TM-pass and TE-pass polarizers, respectively. The polymeric waveguide polarization splitters exhibit TE-TM mode splittings with crosstalk of 14.2 dB and 10.1 dB for TM and TE mode splittings, respectively. The polymeric waveguide polarization converters show successful TE/TM polarization mode conversion with conversion efficiencies of higher than 30 dB. The device employs poling-induced waveguides which have slowly rotating azimuth angle of optic axis along the light propagation direction. The novel polarization converter is insensitive to wavelength and easier to fabricate than the other polarization converters containing periodic structures.