• Wind and Structures
• /
• v.7 no.5
• /
• pp.317-332
• /
• 2004

Wind tunnel experiments were conducted under highly turbulent and disturbed flow conditions over a solid/perforated plate with a long splitter plate in its plane of symmetry. The effect of varied level of perforation of the normal plate on fluctuating velocities and fluctuating pressures measured across and along the separation bubble was studied. The different perforation levels of the normal plate; that is 0%, 10%, 20%, 30%, 40% and 50% are studied. The Reynolds number based on step height was varied from $4{\times}10^3$ to $1.2{\times}10^4$. The shape and size of the bubble vary with different perforation level of the normal plate that is to say the bubble is reduced both in height and length up to 30% perforation level. For higher perforation of the normal plate, bubble is completely swept out. The peak turbulence value occurs around 0.7 to 0.8 times the reattachment length. The turbulence intensity values are highest for the case of solid normal plate (bleed air is absent) and are lowest for the case of 50% perforation of the normal plate (bleed air is maximum in the present study). From the analysis of data it is observed that $\sqrt{\overline{u^{{\prime}2}}}/(\sqrt{\overline{u^{{\prime}2}}})_{max}$, (the ratio of RMS velocity fluctuation to maximum RMS velocity fluctuation), is uniquely related with dimensionless distance y/Y', (the ratio of distance normal to splitter plate to the distance where RMS velocity fluctuation is half its maximum value) for all the perforated normal plates. It is interesting to note that for 50% perforation of the normal plate, the RMS pressure fluctuation in the flow field gets reduced to around 60% as compared to that for solid normal plate. Analysis of the results show that the ratio [$C^{\prime}_p$ max/$-C_{pb}(1-{\eta})$], where $C^{\prime}_p$ max is the maximum coefficient of fluctuating pressure, $C_{pb}$ is the coefficient of base pressure and ${\eta}$ is the perforation level (ratio of open to total area), for surface RMS pressure fluctuation levels seems to be constant and has value of about 0.22. Similar analysis show that the ratio $[C^{\prime}_p$ max/$-C_{pb}(1-{\eta})]$ for flow field RMS pressure fluctuation levels seems to be constant and has a value of about 0.32.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.313-314
• /
• 2007

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.642-643
• /
• 2010

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.491-492
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.301-302
• /
• 2011

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.47-52
• /
• 2011

Directional couplers based on plasmonic waveguides with nano-scale three channels are designed by utilizing mode coupling effect as well as rib-guiding structure. Longitudinal modal transmission-line theory(L-MTLT) is used for simulating the light propagation and optimizing the design parameters. The designed plasmonic coupler operating as power splitter has nano-scale size of about 200~250 nm width. In order to achieve the desired power splitting ratio, the refractive index of guiding modes is evaluated along the width variation of center channel. Finally, a power splitter based on triple rib directional coupler, which ensures maximum power transfer from one outermost guide to the other outermost guide, is designed.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.219-226
• /
• 1996

The wave-particle duality of light plays important role in quantum optics and it often produces a result different from that of classical wave theory. In this paper, we study the intensity and phase fluctuation of light which show certain change after light goes through a beam splitter, and show the difference between the classical and quantum theory. We show quantitatively that the uncertainty of phase increases at the output of a beam splitter due to the contribution of vacuum fluctuation, even though classical theory predicts no such change in phase fluctuation. The expectation values of normally ordered operators are introduced where the vacuum effect is naturally eliminated, and it is shown that the classical informations are recovered in this way. Analysis on the expectation values produces a distinction between measured phase and inferred phase values and they are related through the contribution of vacuum field.

• Laser Solutions
• /
• v.17 no.3
• /
• pp.15-18
• /
• 2014

In this paper, we studied a machining method using a diffractive beam splitter (DBS) and multi- pulse repeated radiation for breathable film. We fabricated micro-grooves on polypropylene (PP) films using multi-pulse radiation and one-shot radiation (radiating pulses at once) and a DBS. In the result, width and depth of the PP film using multi-pulse repeated radiation were more precisely controllable. Therefore, this method can be applicable to in manufacturing breathable film precisely at a high speed.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.123-129
• /
• 2017

This study deals with the traffic accident of truck at circular intersection. The purpose of this study is to develop the truck accident models based on type of accident and conflict. In pursuing the above, the study gives particular attentions to selecting the appropriate models among Poisson and Negative binomial models using statistical program LIMDEP 8.0. The traffic accident data from 2007 to 2014 are collected from TAAS data set of Road Traffic Authority. Such the dependent variable as number of truck accidents and the 24 independent variables as geometry, traffic volume and others are used. The main results are as follows. First, 5 Poisson models (${\rho}^2$ of 0.164~0.351) which are all statistically significant are selected. Second, the common variable based on type of accident and conflict is analyzed to be truck apron width. The specific variables are, however, evaluated to splitter island, area of splitter island, speed limit sign, truck apron, number approach road, circular intersection sign, speed hump and traffic volume. Finally, widening the truck apron width and improving the above specific variables are analyzed to be important for truck accident reduction at circular intersections.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.130-134
• /
• 1995

A small signal gain coefficient of Nd:glass was measured and a cavity-dumped laser was constructed. To measure the small signal gain coefficient, we constructed a resonator consisting of Nd:glass, Pockels cell, polarizing beam splitter. The measured small signal gain coefficient was $0.088 cm_{-1}$ when the input energy was 100 J and the round-trip internal loss of the resonator was 56%. The cavity-dumped laser was constructed using Nd:glass. 2 m radius of curvature HR-mirrors, Pockels cell, polarizinig beam splitter and $\lambda/4$ plate. The output energy of cavity-dumped laser was 0.85 J at 140 J input energy and the laser pulse width was 8 ns.s 8 ns.