• 대한원격탐사학회지
• /
• 제24권4호
• /
• pp.309-324
• /
• 2008

Terra/Aqua MODIS의 적외관측 자료를 이용하여 동아시아 지역에서 물리적 방법과 split-window 방법으로 총가강수량을 산출하는 알고리즘을 개발하였다. 물리적 방법에서는 동아시아 지역에 대한 분석 예측 자료를 생산하는 RDAPS 자료를 알고리즘의 초기 추정치로 사용하였다. 이 과정에서 복사전달계산을 위해 빠르고 정확도가 높은 RTTOV-7 모델을 이용하였다. Split-window를 이용한 총가강수량 산출에서는 동아시아 지역의 라디오존데 관측자료를 훈련자료로 사용하여 밝기온도를 계산하였고, 이로부터 관측된 밝기온도로부터 총가강수량을 산출할 수 있는 회귀식을 도출하였다. 위의 두 알고리즘을 2004년 8월과 12월의 MODIS 적외 자료에 적용하여 산출한 결과를 해양에서는 DMSP SSM/I 결과와 육지에서는 라디오존데 관측 결과와 비교하여 검증하였고, 이를 바탕으로 총가강수량의 정확성에 영향을 미치는 요인과 산출과정에 중요한 물리과정을 분석하였다. 비교결과 RDAPS, MODIS, split-window 방법에 비해 물리적 방법을 이용한 총가강수량의 산출 정확성이 높은 것으로 나타났다. 그러나 물리적 방법은 초기 추정치에 따라 산출결과가 상이하게 나타나는 단점을 가지고 있는 것으로 파악되었다. 따라서 TIGR 자료와 같은 기후 평균값을 초기치로 적용함에 있어 주의가 요구된다. 이러한 원인으로 지표 부근의 수증기에 대한 정보 부족 등을 들 수 있다. 이러한 단점에도 불구하고 지표와 지형의 변화가 큰 한반도를 포함한 동아시아 지역에서는 물리적 방법에 의한 총가강수량 산출의 효율성이 큰 것으로 사료된다.

• 대한원격탐사학회지
• /
• 제11권1호
• /
• pp.31-45
• /
• 1995

The values of brightness temperature difference (BTD) between 11um and 12um infrared channels may reflect amounts of low-level water vapor and cloud types due to the different absorptivity for water vapor between two channels. A simple method of classifying cloud types at night was proposed. Two-dimensional histograms of brightness temperature of the 11um channel and the BTD between the split window data over subareas around characteristic clouds such as Cb(cumulonimbus), Ci(cirrus), and Sc(stratocumulus) was constructed. Cb, Ci and Sc can be classified by seleting appropriate thresholds in the two-dimensional histograms. And we can see amounts of low-level water vapor in clear area as well as cloud types in cloudy area in the BTD image. The map of cloud types and low-level water vapor generated by this method was compared with 850hPa and 1000hPa relative humidity(%) of numerical analysis data and nephanalysis chart. The comparisons showed reasonable agreement.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.518-521
• /
• 2007

To retrieve Sea Surface Temperature(SST) from NOAA-AVHRR imagery the spilt window atmospheric correction algorithm is generally used. Recently, there have been various new algorithms developed to process these data, namely the variable-coefficient split-window, the R54 transmittance-ratio method, fixed-coefficient nonlinear algorithm, dynamic water vapour (DWV) correction method, Dynamic Water Vapour and Temperature algorithm (DWVT). We used MCSST (Multi-Channel Sea surface temperature) and NLSST(Non linear sea surface temperature) algorithms in this study. The study area is around the Korea sea area (Yellow Sea). We compared and analyzed with various methods by applying each Ocean in-situ data and satellite data. The primary aim of study is to verify and optimize algorithms. Finally, this study proposes an optimized algorithm for SST retrieval.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.165-168
• /
• 2005

In this study, emissivity and land surface temperature (LST) were retrieved using the previously developed algorithms and Aqua/MODIS data. And sensitivity of estimated emissivity and LST to the predefined values, such as land cover, normalized difference vegetation index (NOVI) and spectral emissivity were investigated. The methods used for emissivity and LST were vegetation cover method (VCM) and four different split-window algorithms. The spectral emissivity retrieved by VCM was not sensitive to the NOVI error but more sensitive to the land cover error. The comparison of LST showed that the LST was systematically different without regard to the land cover and season. And the LST was very sensitive to the emissivity error excepting the Uliveri et al. This preliminary result indicates that more works are needed for the retrieval of reliable LST from satellite data.

• 한국정보통신학회논문지
• /
• 제11권9호
• /
• pp.1650-1657
• /
• 2007

본 논문은 블록 처리 방법을 기반으로 하는 링잉 노이즈 감소 알고리즘을 사용할 때, 블록 불연속 노이즈(Block Discontinuty)를 방지 할 수 있는 중첩 기 반(Overlapped Block) 연산과 Hanning Window에 관련된 것이다. 링잉 노이즈 감소 알고리즘은, 24bit RGB와 블록 기반 연산으로 하며, 수정된 K-means 알고리즘을 바탕으로 한다. 그래서 제안한 중첩 기반 연산은 입력 영상을 여러 단위 블록으로 조각낼 때, 단위 블록의 크기의 반을 중첩 시켜 선택하는 방법이다. $16{\times}16$ 픽셀 크기의 데이터 블록을 데이터 유닛(Data Unit)이 라고 정의하였다. 그 후 처리된 데이터 유닛들을 등방성 분포를 지닌 Hanning Window를 사용하여 중첩된 데이터에서 원 이미지 형태로 복원하였다. 최종적으로 언급된 알고리즘의 성능을 확인하기 위해서 링잉 노이즈를 가진 이미지를 기존 방법(비 중첩 기반 연산)과 제안한 알고리즘으로 처리함으로써 각각의 결과를 비교하였다.

• 한국정보통신학회논문지
• /
• 제17권3호
• /
• pp.546-555
• /
• 2013

본 연구에서는 수동소나 신호의 분석에서 얻어지는 토널 성분, 즉, 주파수선의 하모닉 성분을 강화하는 새로운 방법을 제안하였다. 제안한 방법에서는, 먼저 스펙트럼의 일정 시간에 따른 주파수 빈별 평균값을 구하고, 평균값과의 차이를 이용하여 안정적인 주파수선과 불안정한 주파수선을 구별한다. 그런 다음 불안정한 주파수선에 자기상관함수와 S2PM을 적용하여 배경잡음을 줄이고 하모닉 성분을 강조하게 된다. 실제 어선에서 획득한 수중음향 데이터를 이용한 실험 결과를 분석하였고, 이를 통해 제안한 방법의 타당성을 검증하였다.

• 대한원격탐사학회지
• /
• 제24권1호
• /
• pp.65-78
• /
• 2008

This study compares the relative accuracy and consistency of four split-window land surface temperature (LST) algorithms (Becker and Li, Kerr et ai., Price, Ulivieri et al.) using 24 sets of Terra (Aqua)/Moderate Resolution Imaging Spectroradiometer (MODIS) data, observed ground grass temperature and air temperature over South Korea. The effective spectral emissivities of two thermal infrared bands have been retrieved by vegetation coverage method using the normalized difference vegetation index. The intercomparison results among the four LST algorithms show that the three algorithms (Becker-Li, Price, and Ulivieri et al.) show very similar performances. The LST estimated by the Becker and Li's algorithm is the highest, whereas that by the Kerr et al.'s algorithm is the lowest without regard to the geographic locations and seasons. The performance of four LST algorithms is significantly better during cold season (night) than warm season (day). And the LST derived from Terra/MODIS is closer to the observed LST than that of Aqua/MODIS. In general, the performances of Becker-Li and Ulivieri et al algorithms are systematically better than the others without regard to the day/night, seasons, and satellites. And the root mean square error and bias of Ulivieri et al. algorithm are consistently less than that of Becker-Li for the four seasons.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.427-435
• /
• 2002

This paper presents a development result for image processed tracking system of multiple moving objects based on Kalman filter and a simple window tracking method. The proposed algorithm of foreground detection and background adaptation (FDBA) is composed of three modules: a block checking module(BCM), an object movement prediction module(OMPM), and an adaptive background estimation module (ABEM). The BCM is processed for checking the existence of objects. To speed up the image processing time and to precisely track multiple objects under the object's mergence, a concept of a simple window tracking method is adopted in the OMPM. The ABEM separates the foreground from the background in the reset simple tracking window in the OMPM. It is shown through experimental results that the proposed FDBA algorithm is robustly adaptable to the background variation in a short processing time. Furthermore, it is shown that the proposed method can solve the problems of mergence, cross and split that are brought up in the case of tracking multiple moving objects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.884-885
• /
• 2007

This paper presents an window based user-friendly designed characteristics analysis program of permanent-split capacitor single-phase induction motor. For the analysis, equivalent magnetic circuit and symmetrical coordinate method are used. The saturation effect and iron loss of stator and rotor core are considered. The analysis program is made to GUI type which can be used easily by many elementary designer. The accuracy of analysis is verified by comparison with experimental results.

• 산업경영시스템학회지
• /
• 제43권2호
• /
• pp.48-55
• /
• 2020

Recently, a study of prognosis and health management (PHM) was conducted to diagnose failure and predict the life of air craft engine parts using sensor data. PHM is a framework that provides individualized solutions for managing system health. This study predicted the remaining useful life (RUL) of aeroengine using degradation data collected by sensors provided by the IEEE 2008 PHM Conference Challenge. There are 218 engine sensor data that has initial wear and production deviations. It was difficult to determine the characteristics of the engine parts since the system and domain-specific information was not provided. Each engine has a different cycle, making it difficult to use time series models. Therefore, this analysis was performed using machine learning algorithms rather than statistical time series models. The machine learning algorithms used were a random forest, gradient boost tree analysis and XG boost. A sliding window was applied to develop RUL predictions. We compared model performance before and after applying the sliding window, and proposed a data preprocessing method to develop RUL predictions. The model was evaluated by R-square scores and root mean squares error (RMSE). It was shown that the XG boost model of the random split method using the sliding window preprocessing approach has the best predictive performance.