• Journal of Korean society of Dental Hygiene
• /
• v.12 no.3
• /
• pp.513-520
• /
• 2012

Objectives : In this study, contact angle and shore D hardness were measured, and a shark fin test was conducted after selecting five addition silicon(Blu-Mousse, BM; EXABITE II, EX; PERFECT, PF; Regisil$^{(R)}$ Rigid, RE; Silagum$^{(R)}$, SI) in order to figure out the properties of elastomeric interocclusal recording materials and reduce errors at interocclusal recording. 8) Methods : A contact angle was measured using a contact angle analyzer. After placing a drop of liquid on the surface of the specimens of interocclusal recording materials, a contact angle was photographed with a CCD camera on the equipment. In terms of a shark fin test, interocclusal recording materials were mixed for the time proposed by the manufacturer and inserted into the split ring of the Shark fin device. Twenty (20) seconds exactly, a metal rod was removed to make the materials slowly absorbed. Once they hardened, fin height was measured with a caliper after separating molds and trimming the specimens. The shore D hardness was measured with a shore D hardness tester(Model HPDSD, Hans Schmidt & Co. Gmbh, Germany) in sixty (60) minutes after fabricating specimens. In each experiment, five specimens, mean and standard deviation were calculated. A one-way ANOVA test was performed at the p>0.05 level of significance. In terms of correlation among the tests, Pearson correlation coefficient was estimated. For multiple comparison, Scheffe's test was carried out. Results : A contact angle was the highest in EX with $99.23^{\circ}$ (p<0.05) while the result of the shark fin test was the longest in RE with 5.45mm. SI was the lowest (0.27mm) with statistical significance. Among the interocclusal recording materials, significant difference was observed in terms of means (p<0.05). The shore D hardness was the highest in SI with 31.0 while RE was significantly low with 16.4 (p<0.05). Among the materials, statistically significant difference was observed in terms of means when compared to the rest materials (RE), BM, RE and SI (PF and EX) and the remaining materials (BM and SI) (p<0.05). In terms of correlations among the tests, a negative correlation occurred between shore D hardness and shark fin test(r=-0.823, p=0.000). Conclusions : According to the study above, it is necessary to understand the properties of interocclusal recording materials and consider contact angle, shark fin test and properties of shore D hardness to select appropriate materials.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.329-335
• /
• 1988

[n order to find out the effects of nitrogen fertilizer and planting density on the leaf characteristics of high yielding cultivars of rice, Dongjin (Japonica type) and Samkang (Tongil type) were .grown under two nitrogen levels (150 and 250 kg N/ha) and three planting densities (30 ${\times}$ 15 cm, 30 ${\times}$ 12 cm, 30 ${\times}$ 9 cm. Leaf blade, sheath and dry weight of individual leaf. the number of green leaves after flowering were measured. Samkang was characterized as longer and wider leaf blade and sheath than Dongjin, less sensitive to nitrogen fertilizer and planting density, and higher proportions of green leaves after flowering. These morphological characteristics of Samkang caused an increase of grain yield by 30 per cent.

• Journal of Korea Water Resources Association
• /
• v.39 no.12 s.173
• /
• pp.997-1012
• /
• 2006

We have presented a nonparametric stochastic approach for the SOI(Southern Oscillation Index) series that used nonlinear methodology called Nonlinear AutoRegressive(NAR) based on conditional kernel density function and CAFPE(Corrected Asymptotic Final Prediction Error) lag selection. The fitted linear AR model represents heteroscedasticity, and besides, a BDS(Brock - Dechert - Sheinkman) statistics is rejected. Hence, we applied NAR model to the SOI series. We can identify the lags 1, 2 and 4 are appropriate one, and estimated conditional mean function. There is no autocorrelation of residuals in the Portmanteau Test. However, the null hypothesis of normality and no heteroscedasticity is rejected in the Jarque-Bera Test and ARCH-LM Test, respectively. Moreover, the lag selection for conditional standard deviation function with CAFPE provides lags 3, 8 and 9. As the results of conditional standard deviation analysis, all I.I.D assumptions of the residuals are accepted. Particularly, the BDS statistics is accepted at the 95% and 99% significance level. Finally, we split the SOI set into a sample for estimating themodel and a sample for out-of-sample prediction, that is, we conduct the one-step ahead forecasts for the last 97 values (15%). The NAR model shows a MSEP of 0.5464 that is 7% lower than those of the linear model. Hence, the relevance of the NAR model may be proved in these results, and the nonparametric NAR model is encouraging rather than a linear one to reflect the nonlinearity of SOI series.

• The Southeast Asian review
• /
• v.27 no.1
• /
• pp.131-161
• /
• 2017

The political dynamics of Malaysia in 2016 should be seen as a process of losing an political opportunity mainly due to the split in opposition parties. The opportunity for political development was triggered by the ruling party in crisis. The ongoing 1Malaysia Development Berhad (1MDB) scandal involving the Prime Minister Najib Razak would have provided a favorable condition for the transfer of power. The opposition parties have however failed to utilize the chance that has arisen since the general elections in 2008 and 2013 due to the chronic problem of disunity. It can be seen as distortions of political development referring to a phenomenon in which a chance for regime change formed by the crisis in authoritarian regime is distorted by internal conflicts among opposition parties. Malaysia's political turmoil seemed to paralyze its economy while foreign policy was used as a tool for domestic politics. It was reported that the key economic indicator have worsen including exports and budget deficit. The ringgit had dropped to its lowest level since the economic crisis in 1997-98 which was mainly attributed to diminishing credibility on the Najib's administration. Najib's political struggle has also impeded Malaysia's foreign policy which has attempt to embrace China and the Rohingya issue. The chance to manage key risks would be diminished if oppositions' disunity continues as there is speculation that the general election could be held in 2017.

• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.513-522
• /
• 2013

The ODSCC detected in the TSP position of Ulchin 3&4 SGs are typical ODSCC of Alloy 600MA tubes. The causative chemical environment is formed by concentration of impurities inside the occluded region formed by the tube surface, egg crate strips, and sludge deposit there. Most cracks are detected at or near the line contacts between the tube surface and the egg crate strips. The region of dense crack population, as defined as between $4^{th}$ and $9^{th}$ TSPs, and near the center of hot leg hemisphere plane, coincided well with the region of preferential sludge deposition as defined by thermal hydraulics calculation using SGAP computer code. The cracks developed homogeneously in a wide range of SGs, so that the number of cracks detected each outage increased very rapidly since the first detection in the $8^{th}$ refueling outage. The root cause assessment focused on investigation of the difference in microstructure and manufacturing residual stress in order to reveal the cause of different susceptibilities to ODSCC among identical six units. The manufacturing residual stress as measured by XRD on OD surface and by split tube method indicated that the high residual stress of Alloy 600MA tube played a critical role in developing ODSCC. The level of residual stress showed substantial variations among the six units depending on details of straightening and OD grinding processes. Youngwang 3&4 tubes are less susceptible to ODSCC than U3 and U4 tubes because semi-continuous coarse chromium carbides are formed along the grain boundary of Y3&4 tubes, while there are finer less continuous chromium carbides in U3 and U4. The different carbide morphology is caused by the difference in cooling rate after mill anneal. There is a possibility that high chromium content in the Y3&4 tubes, still within the allowable range of Alloy 600, has made some contribution to the improved resistance to ODSCC. It is anticipated that ODSCC in Y5&6 SGs will be retarded more considerably than U3 SGs since the manufacturing residual stress in Y5&6 tubes is substantially lower than in U3 tubes, while the microstructure is similar with each other.

• Animal Bioscience
• /
• v.34 no.6
• /
• pp.1078-1087
• /
• 2021

Objective: Skeletal muscle satellite cells (SMSCs) are significant for the growth, regeneration, and maintenance of skeletal muscle after birth. However, currently, few studies have been performed on the isolation, culture and inducing differentiation of goose muscle satellite cells. Previous studies have shown that C1q and tumor necrosis factor-related protein 3 (CTRP3) participated in the process of muscle growth and development, but its role in the goose skeletal muscle development is not yet clear. This study aimed to isolate, culture, and identify the goose SMSCs in vitro. Additionally, to explore the function of CTRP3 in goose SMSCs. Methods: Goose SMSCs were isolated using 0.25% trypsin from leg muscle (LM) of 15 to 20 day fertilized goose eggs. Cell differentiation was induced by transferring the cells to differentiation medium with 2% horse serum and 1% penicillin streptomycin. Immunofluorescence staining of Desmin and Pax7 was used to identify goose SMSCs. Quantitative realtime polymerase chain reaction and western blot were applied to explore developmental expression profile of CTRP3 in LM and the regulation of CTRP3 on myosin heavy chains (MyHC), myogenin (MyoG) expression and Notch signaling pathway related genes expression. Results: The goose SMSCs were successfully isolated and cultured. The expression of Pax7 and Desmin were observed in the isolated cells. The expression of CTRP3 decreased significantly during leg muscle development. Overexpression of CTRP3 could enhance the expression of two myogenic differentiation marker genes, MyHC and MyoG. But knockdown of CTRP3 suppressed their expression. Furthermore, CTRP3 could repress the mRNA level of Notch signaling pathway-related genes, notch receptor 1, notch receptor 2 and hairy/enhancer-of-split related with YRPW motif 1, which previously showed a negative regulation in myoblast differentiation. Conclusion: These findings provide a useful cell model for the future research on goose muscle development and suggest that CTRP3 may play an essential role in skeletal muscle growth of goose.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.9-27
• /
• 2019

The purpose of this study is to examine consumers' responses to mobile payment services by using a text-mining technique focusing on Samsung Pay as it is used in both online and offline transactions. We conducted text frequency analysis, text clustering analysis, and text network analysis using R programming. The major findings are as follows. First, the most frequently used key words referenced the brand names of the mobile devices, the replacement of traditional wallets and unique functions of Samsung Pay. Second, there was a clear split between positive and negative responses at the macro level. Third, replacement of traditional wallets played a great role in the positive responses and continuous use of mobile payment services. This study provides in-depth understanding of consumer responses toward mobile payment services. It also offers practical implications that may help mobile payment marketers correspond to consumer values and expectations, thus increasing consumer satisfaction.

• 한국노년학
• /
• v.29 no.4
• /
• pp.1327-1340
• /
• 2009

The purposes of the study were (1) to identify the level of successful aging of older people living in a city, (2) to identify associated factors with successful aging, and (3) to identify a risk group for successful aging using classification and regression trees (CART) analysis. One hundred eighty seven older people (>65years) participated in the cross-sectional survey. Trained interviewers collected data with a structured questionnaire on demographic information, Korean geriatric depression score, activity of daily living(ADL), instrumental activity of daily living(IADL), and Young's successful aging instrument in subject's home. A CART analysis split subjects into ten homogeneous small groups based on five determinant factors. Older people who are male, with higher education, living with family, and not receiving Medicaid showed better scores in successful aging than their counter parts. Depression was a strong primary determinant for successful aging. A risk group for successful aging of older people was identified by depression and IADL. An intervention to prevent and manage depression and to improve physical function of older people can be developed to promote successful aging of older people. It is suggested to consider an assessment of depression to develop the policies for older people welfare.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.1
• /
• pp.44-52
• /
• 2018

This experiment was conducted at Suwon, Korea from 2013 to 2015. The objective of this study was to establish the optimum seeding rate, and to clarify the nitrogen fertilizer level for rye seed production in central and north area of Korea. We used Korean rye cultivar 'Gogu' for this test. We employed a split-plot design with three replications. The main plots were designed by three seeding levels (3, 5 and $7kg\;10a^{-1}$), but other sub-plots were randomly seeded. The plots were treated with three different nitrogen fertilizer levels (3, 6 and $9kg\;10a^{-1}$). The percentage of productive tiller, number of grain per spike, fertility rate, 1 liter weight, and 1000-grain weight decreased as seeding rate increased from $3kg\;10a^{-1}$ to $7kg\;10a^{-1}$, whereas the number of spike per $m^2$ increased. Therefore the grain yields of rye had less of an effect by increasing seeding rate. There was an increase in number of spike per $m^2$, number of grain per spike, and fertility rate as nitrogen fertilizer level increased from $3kg\;10a^{-1}$ to $9kg\;10a^{-1}$, but grain yields significantly not affected by the interaction of seeding rate ${\times}$ nitrogen fertilizer levels. However, the best seeding rate and nitrogen fertilizer level for rye seed production were 5 kg and $5{\sim}6kg\;10a^{-1}$, respectively, considering seed and fertilizer reduction and the prevention of pollution by excess fertilization.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.52-59
• /
• 2014

This study was conducted to estimate the Hanwoo carrying capacity when whole crop wheat, as a winter forage crop, was grown on mixed-sowing of legume forage and by applying cattle manure on the productivity and feed value of whole crop wheat during the period of 2012~2013. The experiment was conducted in a split plot design with three replications. The main plots consisted of three different culture methods such as whole crop wheat and mixed sowing combination with hairy vetch or forage pea. The subplots consisted of four different applications of cattle manure (0, 50, 100 and 150 kg N/ha). The annual amount of dry matter (DM) of whole crop wheat in Gyeongju were higher than those of in Gyeongsan and Yeongju, and the mixed-sowing of hairy vetch mixture was the highest (p<0.05) compared with the single-sowing of whole crop wheat and mixed-sowing of legume in Gyeongju. The DM amounts were increased proportionately corresponded to the applying level of cattle manure, and was found to be significantly (p<0.05) high at the level of 100 and 150 kg/ha groups. With the feed value of forage, the crude protein (CP) contents tended to be higher in the mixed-sowing of legume than the single-sowing of whole crop wheat at the wintering experimental sites of legume. For whole crop wheat, total digestible nutrients (TDN) content was the highest in the mixed sowing plots of forage pea in Gyeongsan; however, there was no significant differences among the single-sowing of whole crop wheat. The carrying capacity of Hanwoo (head/ha) was higher (p<0.05) in Gyeongju (3.83 head) than that in Gyeongsan (3.11) and Yeongju (1.35). Further, the carrying capacity in the single-sowing of whole crop wheat was lower than that in the mixed-sowing of legume, and the hairy vetch was the highest among the mixed-sowing groups (p<0.05). Overall, the present results recommend taking into account the wintering for the mix-sowing of legume in Gyeongbuk province. The cattle manure may be applied for legume in the wintering unavailable regions. In addition, applying cattle manure at the level of 100~150 kg/ha and the mix-sowing of legume may increase the productivity per unit area and feed value, including the CP, for improving the carrying capacity of Hanwoo.