• 대한한방체열의학회지
• /
• 제5권1호
• /
• pp.69-77
• /
• 2006

Purpose : There are many patients with cold hypersensitivity who want oriental medicine treatment. But there has been no study of acupucture treatment effect on patients. So we examined effects of acupuncture treatment at different acupuncture points and compared results of 1st cold stress test and 2nd cold stress test. Method : 8 patients with hand cold hypersensitivity applied for this study. To rule out an bias, we excluded the patients with skin diseases, spinal nerve disease of cervial spine, external wounds. We measured body temperature with D.I.T.I. We performed cold stress test(CST) by 6 thermographic observation using D.I.T.I ; the 1st was taken after 15 minutes-resting, the 2nd was immediately taken after 1 minute soak in $20^{\circ}C$ water, the 3rd was taken at 10 minutes after the soak, and after a week, the 4th was taken after 15 minutes resting, the 5th was immediately taken after 1 minute soak in $20^{\circ}C$ water, the 6th was taken after 10 minutes with acupunture treatment. There were two groups of patients. First group was acupuncture that performed acupuncture therapy on distal points. Second group was acupuncture that performed acupuncture therapy on proximal points. We compared first CST and second CST recovery rate result. Results : The recovery rate at distal points acupuncture therapy was higher than before of that. but not significantly different. The recovery rate at proximal points acupuncture therapy was significantly higher than before of that. The recovery rate of both the back, the palms, all fingers of after proximal acupuncture therapy was significantly higher than before of that. Conclusions : Acupuncture could be effective therapy method on cold hypersensitivity, especially using proximal acupuncture points could be good at cold hypersensitivity patients. This was pilot study of very small samples, results had limitations. For further results more examine would be needed.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권4호
• /
• pp.272-277
• /
• 2011

Purpose: The aim of this study was to compare the estimated blood loss and determine the change in hemoglobin depending on the combination of each orthognathic surgery. Subjects and Methods: The subjects of this study were patients who underwent orthognathic surgery among those diagnosed with a dentofaical deformity in Mok-Dong hospital, Ewha Womans University from 2002 to 2009. One hundred patients (men - 36, women - 64, mean age of $24.5{\pm}4.6$) participated in the study and were divided into four groups (group 1 - bilateral sagittal ramus osteotomy [BSSRO], group 2 - BSSRO+Genioplasty, group 3 - Lefort 1+BSSRO+genioplasty, group 4 - anterior segmental osteotomy on maxilla and mandible). A comparative study on the estimated blood loss (EBL), operation time, peri-operative changes in hemoglobin was performed using anesthesia records. The results were analyzed statistically using a Mann-Whitney U-test and Spearman's Rho test - SPSS 12.0 (SPSS Inc. Chicago, IL, USA). Results: In group 1 (BSSRO), the mean EBL, operation time and change in hemoglobin was $394.43{\pm}52.69$ ml, $184{\pm}42.33$ minutes, and 1.43, respectively, In group 2 (BSSRO+genioplasty), it was $556.32{\pm}63.42$ ml, $231{\pm}37.45$ minutes, and 1.80, respectively. In group 3 (Lefort 1+BSSRO+Genioplasty), it was $820.55{\pm}105.54$ ml, $320{\pm}15.41$ minutes, and 2.73, respectively. In group 4 (segmental osteotomy), it was $1025.39{\pm}160.21$ ml, $355{\pm}20.10$ minutes, and 3.33, respectively. In particular, in group 3, significant differences were observed depending on the method of the orthognathic surgery. The mean EBL in a Lefort 1 osteotomy with advancement was only 687 ml, whereas Lefort 1 osteotomy with canting correction (992 ml), even impaction (764 ml), and posterior nasal spine impaction (100 ml) showed a much higher EBL. Conclusion: From these results, the EBL and peri-operation hemoglobin increased as treatment plans became more complicated and increasing operation time. Safe orthognathic surgery should be performed by applying proper autologous transfusion plans based on the average EBL of each orthognathic surgery type.

• Journal of Radiation Protection and Research
• /
• 제27권3호
• /
• pp.155-164
• /
• 2002

몬테칼로 모사를 통해 여러 가지 진단X선 검사를 받는 성인의 유효선량을 평가하는 방법체계를 구축하였다. 피사체 인형팬텀으로서 MIRD5 남성 팬텀과 ORNL 여성팬텀이 이용되었고 사용 X선 스펙트럼은 SPEC78 코드로 생산하였다. 같은 진단절차에 대해 NRPB 평가결과와 비교함으로써 계산체계를 검증하였다. 계산체계를 이용하여 흉곽, 복부, 두부 및 척추의 진단에서 AP, PA, LLAT 및 RLAT 방향으로 입사하는 X선에 대한 장기 등가선량과 유효선량을 평가하였으며 가장 보편적인 흉곽 PA와 복부 AP의 경우 유효선량이 각각 0.029mSv와 0.44mSv로 나타났다. 흉곽 PA 1회 촬영 시 피폭하는 선량이 전통적 평가치인 0.3mSv(또는 30mrem)보다 매우 작게 나타나는 것은 진단방사선 기술의 발전뿐만 아니라 적용하는 선량개념의 차이에 기인하는 것으로서 여러 방사선 의료절차에 대한 집중적인 환자선량 평가의 필요성을 강조하는 것이다. 여기서 개발된 선량평가 체계는 CT 선량, 임부의 진단으로 인한 태아의 선량, 소아과 X선에 의한 선공 등 다른 방사선 의료절차에도 용이하게 응용될 수 있다.

• 구강회복응용과학지
• /
• 제29권4호
• /
• pp.337-346
• /
• 2013

정중설공은 하악 전치부에 존재하는 해부학적 구조물로서, 구강저의 혈행을 담당하는 설하 동맥이 통과한다. 임플란트 시술 시 설하 동맥의 손상으로 인한 대량 출혈을 예방하기 위해서는 CBCT를 통한 정중설공의 주의 깊은 관찰이 필요하다. 본 연구의 목적은 하악 정중설공의 해부학적 특성인 출현빈도, 위치, 직경과 그 수를 성별과 나이에 따라 CBCT 이미지를 이용하여 평가하기 위함이다. 2008년 11월부터 2011년 5월까지 전남대학교 치과병원을 내원한 62명의 CBCT 이미지(남성 41명, 여성 21명; 평균 연령 43세; 연령 분포 9~85세)를 평가하였다. 하악 전치부 CBCT에서 관찰되는 정중설공의 출현빈도, 수, 위치, 수직적 거리와 직경을 계측하였다. 62명의 환자(100%) 모두에서 설극 상방에 1개 이상의 정중설공을 관찰할 수 있었고, 56명(90.32%)은 다수의 정중설공을 가지고 있었다(2개 64.52%, 3개 25.8%). 42명(66.13%)의 환자에서 하악 양 중절치 사이의 정중설공을 관찰할 수 있었다. 치조정에서 설극까지의 평균 높이는 24.21 mm 였고, 하악골 하연에서 정중설공까지의 평균높이는 14.53 mm, 하악골에서의 상대적인 높이는 0.45였다. 설공의 평균 직경은 0.93 mm였다. CBCT를 통해 정중설공의 출현빈도, 위치, 직경과 그 수를 쉽게 확인할 수 있다. 전치부 임플란트 시술 시 대량 출혈의 합병증을 예방하기 위해서는 임플란트 식립 전 CBCT를 촬영하여 개개인의 정중설공의 해부학적 평가하는 것이 필요할 것이다.

• 대한인간공학회지
• /
• 제30권6호
• /
• pp.695-703
• /
• 2011

Objective: This study was to investigate the effects of coordinated upper-limb body postures on the subjective discomfort rating, heart rate, and muscle activities. Background: Although generally many checklists such as OWAS, RULA, and REBA were applied to evaluate various body postures, the body postures were might be overestimated or underestimated because each body part(i.e., back, shoulder, and elbow etc.) was evaluated separately, and then added all rates of individual body parts to assess an overall risk level for the body posture in these methodologies. Methods: A total of 20 participants maintained 14 postures which were combinations of back, shoulder, and elbow flexion angles and then muscle activities, subjective discomfort, and heart rates were collected every three minute during a sustained 15 minute and 0.5kg weight holding task. Four muscle groups were investigated: erector spine, anterior deltoid, upper trapezius, triceps brachii. Results: Results showed that subjective discomfort was the lowest when the angle of back and shoulder were both $0^{\circ}s$, while the body posture with $45^{\circ}$ of back angle and $45^{\circ}$ shoulder angle was rated as the most subjective discomfort posture. In general, the subjective discomfort ratings increased as back and shoulder flexion angles increased. It was noted that, however, the subjective discomfort of body posture with a $45^{\circ}$ back angle and $45^{\circ}$ shoulder flexion angle was lower than that of body posture with a $0^{\circ}$ back and $45^{\circ}$ shoulder flexion angle. The research findings of heart rates and muscle activities showed similar results for the analyses of subjective discomfort ratings. Conclusions: The possible limitations of the current ergonomics evaluation techniques which assessing a body posture with summing all body part score after individually analyzed in this study. Based on the analyses of subjective discomfort, heart rate, and muscle activities, it was recommended that a use of effects of coordinated upper-limb body postures would be considered when one evaluates work-load for various working postures. Application: These findings can be used for developing a more accurate assessment checklist for working posture as well as preventing musculoskeletal disorders of workers in workplaces.

• 대한기계학회논문집A
• /
• 제36권1호
• /
• pp.29-35
• /
• 2012

척추관 협착증은 감압술과 융합술 그리고 인공추간판 치환술 등이 있으며, 2000년대 중반부터는 인공추간판 치환술이 널리 시술되고 있다. 인공추간판의 연구는 추간판의 자유도 및 추체의 굴곡-신전, 측굴전, 축회전에 대한 해석이 핵심기술이지만, 시술 후 수년이 경과하여 발생하는 피로파손이 새롭게 큰 문제점으로 대두되고 있다. 따라서 인공추간판 연구는 슬라이딩 코어의 피로특성 및 내구성 향상에 집중되어야 한다. 본 연구에서는 세계적으로 가장 많이 사용되는 인공추간판 제품(SB Charit$\acute{e}$ III)을 기초로 유한요소모델을 제작하고, 슬라이딩 코어의 곡률반경과 마찰계수의 변화가 von-Mises 응력과 접촉압력에 미치는 영향을 평가하였다. 이와 같은 결과를 바탕으로 새로운 인공추간판 모델들 (Model-I, -II, -III)을 제안하고 일정수명 후 발생할 수 있는 슬라이딩 코어의 피로파손 거동에 대해 SB Charit$\acute{e}$ III의 결과와 비교 평가하였다.

• 한국어류학회지
• /
• 제19권3호
• /
• pp.201-209
• /
• 2007

광학현미경상에서 복섬, Takifugu niphobles의 피부 표면은 불규칙한 주름을 가지는데, 이들 주름은 등 쪽보다 배 쪽에서 훨씬 뚜렷했다. 피부계는 외부로부터 상피층과 진피층으로 구분되며, 상피층은 다층상피층으로 상피세포, 점액세포, 곤봉상세포, 과립세포 그리고 multivacuolar gland들로 구성되어 있었다. 상피세포는 표면세포, 중간세포, 기저세포로 구분되며, 표면상피의 자유면은 미세융기로 덮여 있었다. 상피층의 선세포는 단세포선과 다세포선으로 구분되었다. 점액분비선은 다세포선의 형태로 점액세포들은 중성 당단백질의 점액물질을 함유하고 있었다. Multivacuolar gland들은 장경 약 $20{\mu}m$의 vacuole cell들로 구성되어 있었다. Vacuole cell들은 커다란 중심공포를 가지며, 잘 발달된 desmosome으로 연결되어 있었다. 점액분비선과 multivacuolar gland는 등 쪽에 비해 배 쪽에서 훨씬 발달되어 있었다. 진피층의 두께는 배 쪽 피부계의 경우에는 상피세포층의 3~5배였다. 진피층은 치밀결합조직으로 교원섬유, 섬유세포, 가시의 기저부, 색소세포 및 다수의 신경세포 분포가 확인되었다.

• 한국전문물리치료학회지
• /
• 제18권4호
• /
• pp.60-67
• /
• 2011

Ultrasonography (US) is a recent technique that has proven to be useful for assessing muscle thickness and guiding the rehabilitation decision-making of clinicians and researchers. The purpose of this study was to determine the inter-rater reliability of the US measurement of transversus abdominis (TrA), internal oblique (IO), and external oblique (EO) thicknesses for different probe locations and measurement techniques. Twenty healthy volunteers were recruited in this study. Muscle thicknesses of the transversus TrA, IO, and EO were measured three times in the hook-lying position. The three different probe locations were as follows: 1) Probe location 1 (PL1) was below the rib cage in direct vertical alignment with the anterior superior iliac spine (ASIS). 2) Probe location 2 (PL2) was halfway between the ASIS and the ribcage along the mid-axillary line. 3) Probe location 3 (PL3) was halfway between the iliac crest and the inferior angle of the rib cage, with adjustment to ensure the medial edge of the TrA. The two different techniques of thickness measurement from the captured images were as follows: 1) Muscle thickness was measured in the middle of the muscle belly, which was centered within the captured image (technique A; TA). 2) Muscle thickness was measured along a horizontal reference line located 2 cm apart from the medial edge of the TrA in the captured image (technique B; TB). The intraclass correlation coefficient (ICC [3,k]) was used to calculate the inter-rater reliability of the thickness measurement of TrA, IO and EO using the values from both the first and second examiner. In all three muscles, moderate to excellent reliability was found for all conditions (probe locations and measurement techniques) (ICC=.70~.97). In the PL1-TA condition, inter-rater reliability in the three muscle thicknesses was good to excellent (ICC=.85~.96). The reliability of all measurement conditions was excellent in IO (ICC=.95~.97). Therefore, the findings of this study suggest that TA can be applied to PL1 by clinicians and researchers in order to measure the thickness of abdominal muscles.

• 한국건설관리학회논문집
• /
• 제5권2호
• /
• pp.90-105
• /
• 2004

크랙실링 자동화 장비는 도로면에 존재하는 크랙 네트워크의 위치를 정확히 탐지 및 맵핑(mapping)하고 이를 모델링(modeling)한 후 경로 계획(path planning) 과정을 통해 크랙 네트워크의 중앙(spine)을 따라 실런트(sealant)를 분사하여 크랙을 효과적으로 실링할수 있도록 하는 장비이다. 따라서 실링될 크랙 네트워크의 정확한 위치를 모델링하기 위한 디지털 영상처리 알고리즘 및 최적 경로계획 알고리즘의 개발은 품질 및 생산성, 경제성 측면에서 크랙실링 자동화 장비의 성공적 개발을 위한 핵심 연구 주제로 인식되어 왔다. 기존 국외 도로면 크랙실링 자동화 장비에 적용된 디지털 영상처리 알고리즘은 크랙을 탐지하고 모델링하는 일련의 과정을 전적으로 컴퓨터에 의존하는 완전자동화 방식과 인간과 컴퓨터 간의 협업체제를 이용한 반자동화 방식으로 양분되어 개발되었다. 그러나 도로면에 존재하는 다양한 노이즈 및 그림자 등을 포함한 작업영역 내에서의 열악한 영상처리 여건 등으로 인해 만족할 만한 성과를 제시하지 못하였다. 따라서 본 연구에서는 크랙실링 자동화 장비를 개발함에 있어 디지털 영상처리 기술을 기반으로 한 완전자동화 방식과 그래피컬 프로그래밍을 활용한 반자동화 방식이 지닐 수 있는 강점만을 혼용하여 신속하고도 정확하게 크랙 네트워크를 모델링하고 최적 경로계획을 바탕으로 크랙실링 작업을 수행할 수 있는 머신비전 알고리즘을 제시하고자 한다.

• Genomics & Informatics
• /
• 제14권2호
• /
• pp.62-68
• /
• 2016

Osteoporosis is a medical condition of global concern, with increasing incidence in both sexes. Bone mineral density (BMD), a highly heritable trait, has been proven a useful diagnostic factor in predicting fracture. Because medical information is lacking about male osteoporotic genetics, we conducted a genome-wide association study of BMD in Korean men. With 1,176 participants, we analyzed 4,414,664 single nucleotide polymorphisms (SNPs) after genomic imputation, and identified five SNPs and three loci correlated with bone density and strength. Multivariate linear regression models were applied to adjust for age and body mass index interference. Rs17124500 ($p=6.42{\times}10^{-7}$), rs34594869 ($p=6.53{\times}10^{-7}$) and rs17124504 ($p=6.53{\times}10^{-7}$) in 14q31.3 and rs140155614 ($p=8.64{\times}10^{-7}$) in 15q25.1 were significantly associated with lumbar spine BMD (LS-BMD), while rs111822233 ($p=6.35{\times}10^{-7}$) was linked with the femur total BMD (FT-BMD). Additionally, we analyzed the relationship between BMD and five genes previously identified in Korean men. Rs61382873 (p = 0.0009) in LRP5, rs9567003 (p = 0.0033) in TNFSF11 and rs9935828 (p = 0.0248) in FOXL1 were observed for LS-BMD. Furthermore, rs33997547 (p = 0.0057) in ZBTB and rs1664496 (p = 0.0012) in MEF2C were found to influence FT-BMD and rs61769193 (p = 0.0114) in ZBTB to influence femur neck BMD. We identified five SNPs and three genomic regions, associated with BMD. The significance of our results lies in the discovery of new loci, while also affirming a previously significant locus, as potential osteoporotic factors in the Korean male population.