• Title/Summary/Keyword: spin group

Search Result 138, Processing Time 0.032 seconds

Added Value of Chemical Exchange-Dependent Saturation Transfer MRI for the Diagnosis of Dementia

  • Jang-Hoon Oh;Bo Guem Choi;Hak Young Rhee;Jin San Lee;Kyung Mi Lee;Soonchan Park;Ah Rang Cho;Chang-Woo Ryu;Key Chung Park;Eui Jong Kim;Geon-Ho Jahng
    • Korean Journal of Radiology
    • /
    • v.22 no.5
    • /
    • pp.770-781
    • /
    • 2021
  • Objective: Chemical exchange-dependent saturation transfer (CEST) MRI is sensitive for detecting solid-like proteins and may detect changes in the levels of mobile proteins and peptides in tissues. The objective of this study was to evaluate the characteristics of chemical exchange proton pools using the CEST MRI technique in patients with dementia. Materials and Methods: Our institutional review board approved this cross-sectional prospective study and informed consent was obtained from all participants. This study included 41 subjects (19 with dementia and 22 without dementia). Complete CEST data of the brain were obtained using a three-dimensional gradient and spin-echo sequence to map CEST indices, such as amide, amine, hydroxyl, and magnetization transfer ratio asymmetry (MTRasym) values, using six-pool Lorentzian fitting. Statistical analyses of CEST indices were performed to evaluate group comparisons, their correlations with gray matter volume (GMV) and Mini-Mental State Examination (MMSE) scores, and receiver operating characteristic (ROC) curves. Results: Amine signals (0.029 for non-dementia, 0.046 for dementia, p = 0.011 at hippocampus) and MTRasym values at 3 ppm (0.748 for non-dementia, 1.138 for dementia, p = 0.022 at hippocampus), and 3.5 ppm (0.463 for non-dementia, 0.875 for dementia, p = 0.029 at hippocampus) were significantly higher in the dementia group than in the non-dementia group. Most CEST indices were not significantly correlated with GMV; however, except amide, most indices were significantly correlated with the MMSE scores. The classification power of most CEST indices was lower than that of GMV but adding one of the CEST indices in GMV improved the classification between the subject groups. The largest improvement was seen in the MTRasym values at 2 ppm in the anterior cingulate (area under the ROC curve = 0.981), with a sensitivity of 100 and a specificity of 90.91. Conclusion: CEST MRI potentially allows noninvasive image alterations in the Alzheimer's disease brain without injecting isotopes for monitoring different disease states and may provide a new imaging biomarker in the future.

Some Factors Affecting Bone Mineral Status of Postmenopausal Women (폐경 후 여성의 골격상태에 영향을 미치는 요인분석)

  • 오세인;이행신;이미숙;김초일;권인순;박상철
    • Korean Journal of Community Nutrition
    • /
    • v.7 no.1
    • /
    • pp.121-129
    • /
    • 2002
  • Osteoporosis, the typical metabolic bone disease of the elderly, is characterized by a reduction in bone mineral density (BMD) and increased fracture risk. Genetic and environmental factors are known to play a key role in bone metabolism, and diet is also considered to be one of the important factors. The purpose of the present study was to investigate the relationship among the factors affecting BMD, including stature, body weight, age, time period since onset of menopause, and biochemical markers of bone turnover in postmenopausal women. Seventy-eight postmenopausal women who visited health promotion center for health examinations volunteered to participate in this study and they were divided into two groups according to the time period since onset of menopause : women with a time period since onset of menopause of less than 5 years (Group 1) and women with a time period since onset of menopause of 5 years or more (Group 2). The demographic characteristics and dietary intake were surveyed using a questionnaire. BMDs of the lumbar spine and femoral neck of subjects were measured by dual energy X-ray absorptiometry. Serum levels of 25-hydroxy-vitamin D and parathyroid hormone (PTH), known to be indicators of bone related hormone status, were anlyzed. Serum samples were measured for calcium, phosphorus, alkaline phosphatase, and osteocalcin as bone formation indicators, and urine was analysed for deoxypyridinoline, creatinine, calcium, and sodium as bone resorption indicators. The results are as follow : The mean BMDs of the lumbar spin and femoral neck were $1.02 \pm 0.02 g/cm^2 and 0.81 \pm 0.02 g/cm^2 respectively, and the BMD level of Group 2 was significantly lower than tat of Group 1 (p<0.01, p<0.05, respectively). The mean daily intake of energy was 1838 $\pm$ 55 kcal. When nutrient intake was compared with the recommended dietary allowances (RDA) of the subjects, only calcium, vitamin A and riboflavin intake showed means lower than the RDA. The nutrient intake did not show any significant differences between Group 1 and 2 Serum and urine levels of biochemical markers of bone turnover did not show any significant differences between Group 1 and 2, and all were within the normal range. However, the PTH and deoxypyridinoline levels showed a tendency to be higher, and the osteocalcin level to be lower in Group 2 than in Group 1. Although age and years after menopause (YAM) showed negative correlations with lumbar spine bone mineral density (LBMD) (r= -0.38, p<0.001, and r= -0.26, p< 0.05, respectively), no correlation was found with femoral neck bone mineral density (NBMD). While height, body weight and body mass index (BMI) showed a positive correlation with LBMD (r= 0.32, p<0.001, r= 0.38, p<0.001, r= 0.22, p= 0.05, respectively), only body weight and BMI showed a positive correlation with NBMD (r= 0.30, p<0.01, and r= 0.27, p<0.05, respectivley). There was no significant corealtion between BMDs and the nutrient intake of subjects, except in the case of carbohydrates (r= 0.22, p<0.05). Also, serum and urine levels of bone turnover markers showed no significant correlation with nutrient intake. On the other hand, serum osteocalcin had a positive correlation with vitamin C intake (r= 0.22, p= 0.05), and urine deoxypyridinolin showed a negative correlation with niacin intake (r= -0.22, p= 0.05). Urinary na was negatively correlated with protein intake(r= -0.23, p= 0.05). The results suggested that it is difficult to prevent the decrease in bone mass among postmenopausal women eating the usual Korean diet. However, the BMDs of the lumbar spine and femoral neck were positively related to body weight ad BMI in postmenopausal women. Therefore, this study confirmed that one of the most effective ways to minimize bone loss in postmenopausal women would be to maintain an adequate body weight with balanced nutrient intake and activity in the pre-and postmenopausal periods.

Cyanide-Bridged CrIIIMnII Binuclear Complexes Based on [Mn(phen)2]2+ and Dicyanidechromate(III) Building Blocks: Syntheses, Crystal Structures, and Magnetic Properties

  • Li, Guo-Ling;Zhang, Li-Fang;Ni, Zhong-Hai;Kou, Hui-Zhong;Cui, Ai-Li
    • Bulletin of the Korean Chemical Society
    • /
    • v.33 no.5
    • /
    • pp.1675-1680
    • /
    • 2012
  • Three new cyanide-bridged $Cr^{III}Mn^{II}$ binuclear complexes, $[Mn(phen)_2Cl][Cr(bpmb)(CN)_2]{\cdot}H_2O$ ($\mathbf{1}$) (phen = 1,10-phenanthroline, $bpdmb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-methyl-benzenate), $[Mn(phen)_2Cl][Cr(bpmb)-(CN)_2]{\cdot}H_2O$ ($\mathbf{2}$) ($bpdmb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4,5-dimethyl-benzenate), and $[Mn(phen)_2Cl]-[Cr(bpClb)(CN)_2]{\cdot}CH_3OH{\cdot}H_2O$ ($\mathbf{3}$) ($bpClb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-chloro-benzenate) were obtained based on $Mn(phen)_2Cl_2$ and a series of dicyanidechromate(III) building blocks. Single crystal X-ray diffraction analysis shows the structures of the three complexes are dimeric type with two different metal centers linked by a cyanide group from corresponding dicyanidechromate(III) building block. Magnetic investigations indicate the existence of relatively weak antiferromagnetic coupling between Cr(III) and Mn(II) ions with best-fit constants $J_{CrMn}=-2.78(5)cm^{-1}$ for $\mathbf{1}$, $J_{CrMn}=-3.02(2)cm^{-1}$ for $\mathbf{2}$ and $J_{CrMn}=-2.27(3)cm^{-1}$ for $\mathbf{3}$ based on the spin exchange Hamiltonian = $-2J_{CrMn}\hat{S}_{Cr}\hat{S}_{Mn}$. The magneto-structural correlation of cyanide-bridged $Cr^{III}Mn^{II}$ complexes has been discussed at last.

용액공정을 이용한 SiOC/SiO2 박막제조

  • Kim, Yeong-Hui;Kim, Su-Ryong;Gwon, U-Taek;Lee, Jeong-Hyeon;Yu, Yong-Hyeon;Kim, Hyeong-Sun
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2009.11a
    • /
    • pp.36.2-36.2
    • /
    • 2009
  • Low dielectric materials have been great attention in the semiconductor industry to develop high performance interlayer dielectrics with low k for Cu interconnect technology. In our study, the dielectric properties of SiOC /SiO2 thin film derived from polyphenylcarbosilane were investigated as a potential interlayer dielectrics for Cu interconnect technology. Polyphenylcarbosilane was synthesized from thermal rearrangement of polymethylphenylsilane around $350^{\circ}C{\sim}430^{\circ}C$. Characterization of synthesized polyphenylcarbosilane was performed with 29Si, 13C, 1H NMR, FT-IR, TG, XRD, GPC and GC analysis. From FT-IR data, the band at 1035 cm-1 is very strong and assigned to CH2 bending vibration in Si-CH2-Si group, indicating the formation of the polyphenylcarbosilane. Number average of molecular weight (Mn) of the polyphenylcarbosilane synthesized at $400^{\circ}C$ for 6hwas 2, 500 and is easily soluble in organic solvent. SiOC/SiO2 thin film was fabricated on ton-type silicon wafer by spin coating using 30wt % polyphenylcarbosilane incyclohexane. Curing of the film was performed in the air up to $400^{\circ}C$ for 2h. The thickness of the film is ranged from $1{\mu}m$ to $1.7{\mu}m$. The dielectric constant was determined from the capacitance data obtained from metal/polyphenylcarbosilane/conductive Si MIM capacitors and show a dielectric constant as low as 2.5 without added porosity. The SiOC /SiO2 thin film derived from polyphenylcarbosilane shows promising application as an interlayer dielectrics for Cu interconnect technology.

  • PDF

Antioxidant Activity and Inhibition of MMP-9 by Isorhamnetin and Quercetin 3-O-$\beta$-D-Glucopyranosides Isolated from Salicornia herbacea in HT1080 Cells

  • Kong, Chang-Suk;Kim, You-Ah;Kim, Moon-Moo;Park, Jin-Sook;Kim, Se-Kwon;Lee, Burm-Jong;Nam, Taek-Jeong;Seo, Young-Wan
    • Food Science and Biotechnology
    • /
    • v.17 no.5
    • /
    • pp.983-989
    • /
    • 2008
  • Two flavonoids, isorhamnetin 3-O-$\beta$-D-glucopyranoside (1) and quercetin 3-O-$\beta$-D-glucopyranoside (2), from slander glasswort (Salicornia herbacea, Korean name hamcho) were isolated. Antioxidative and matrix metalloproteinase-9(MMP-9) inhibitory effects of these compounds were investigated in HT 1080 cell lines. These compounds suppressed the electron spin resonance (ESR) signal intensity on generation of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical in a free-cellular system. Their scavenging effects on generation of intercellular reactive oxygen species (ROS) also exhibited similar trends with DPPH radical in the free cellular system. Also, a control group combined only with Fe(II)-$H_{2}O_2$ resulted in DNA apoptosis by oxidative stress, whereas treatments with these compounds suppressed radical-mediated DNA damage. Intracellular glutathione (GSH) levels were slightly increased in the presence of compound 1 and 2. Moreover, these compounds led to the reduction of the expression levels of MMP-9 without cytotoxic influence. These results suggest that these compounds have a potential as a valuable natural antioxidant and MMP inhibitor related to oxidative stress. Therefore, these compounds not only can be developed as a candidate for a therapeutic potential but also a source for use as ingredients of health foods or functional foods to prevent metastasis involving MMP-9, closely related to ROS.

Shape Error and Its Compensation in the Fabrication of Microlens Array Using Photoresist Thermal Reflow Method (Photoresist thermal reflow 방법을 이용하여 제작한 마이크로렌즈 어레이의 형상 관련 오차 및 이에 대한 보정)

  • Kim, Sin Hyeong;Hong, Seok Kwan;Lee, Kang Hee;Cho, Young Hak
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.20 no.2
    • /
    • pp.23-28
    • /
    • 2013
  • Microlens array as basic element of the optical system have been fabricated with various focal length (mainly with long focal length) depending on the purpose of application. In this paper, the microlens arrays were fabricated for observing fluorescent images within sol-gel. Though the fluorescent signal is very low, the microlens array can help obtaining clear images through extracting the fluorescent light from sol-gel. We fabricated microlens arrays with short focal length, which can extract the light using photoresist thermal reflow method. In the experiment, the diameter of microlens decreased after thermal reflow because the solvent within the photoresist was vaporized. Therefore, to compensate the shape error by this reduction, microlens diameter in photomask was altered and spin-coat recipe of photoresist were modified.

Non-monotonic Size Dependence of Electron Mobility in Indium Oxide Nanocrystals Thin Film Transistor

  • Pham, Hien Thu;Jeong, Hyun-Dam
    • Bulletin of the Korean Chemical Society
    • /
    • v.35 no.8
    • /
    • pp.2505-2511
    • /
    • 2014
  • Indium oxide nanocrystals ($In_2O_3$ NCs) with sizes of 5.5 nm-10 nm were synthesized by hot injection of the mixture precursors, indium acetate and oleic acid, into alcohol solution (1-octadecanol and 1-octadecence mixture). Field emission transmission electron microscopy (FE-TEM), High resolution X-Ray diffraction (X-ray), Nuclear magnetic resonance (NMR), and Fourier transform infrared spectroscopy (FT-IR) were employed to investigate the size, surface molecular structure, and crystallinity of the synthesized $In_2O_3$ NCs. When covered by oleic acid as a capping group, the $In_2O_3$ NCs had a high crystallinity with a cubic structure, demonstrating a narrow size distribution. A high mobility of $2.51cm^2/V{\cdot}s$ and an on/off current ratio of about $1.0{\times}10^3$ were observed with an $In_2O_3$ NCs thin film transistor (TFT) device, where the channel layer of $In_2O_3$ NCs thin films were formed by a solution process of spin coating, cured at a relatively low temperature, $350^{\circ}C$. A size-dependent, non-monotonic trend on electron mobility was distinctly observed: the electron mobility increased from $0.43cm^2/V{\cdot}s$ for NCs with a 5.5 nm diameter to $2.51cm^2/V{\cdot}s$ for NCs with a diameter of 7.1 nm, and then decreased for NCs larger than 7.1 nm. This phenomenon is clearly explained by the combination of a smaller number of hops, a decrease in charging energy, and a decrease in electronic coupling with the increasing NC size, where the crossover diameter is estimated to be 7.1 nm. The decrease in electronic coupling proved to be the decisive factor giving rise to the decrease in the mobility associated with increasing size in the larger NCs above the crossover diameter.

A New Alternative Hole-transporting Layer to PEDOT:PSS for Realizing Highly Efficient All Solution-processable PLEDs

  • Kang, Beom-Goo;Kang, Hong-Kyu;Lee, Kwang-Hee;Lee, Chang-Lyoul;Lee, Jae-Suk
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.362-363
    • /
    • 2012
  • A new cross-linkable polymer, cross-linked d-PBAB, which has the triphenylamine as the hole transporting moiety and ethynyl group as the thermal cross-linker is firstly synthesized by the combination of anionic polymerization and deprotection process. The thermal cross-linking reaction was performed at $240^{\circ}C$ for 50 min and cross-linked d-PBAB layer showed smooth surface and is not soluble at organic solvent under spin-coating of emitting layer (EML). The solution-processed PLED which was fabricated with cross-linked d-PBAB as HTL showed approximately two times higher Lmax and four times higher LEmax than those obtained from PLED with PEDOT:PSS as the HTL. These result is ascribed to better ability of cross-linked d-PBAB to block electrons and to prevent exciton-quenching than those of PEDOT : PSS at the EML interface. This results strongly suggested that cross-linked d-PBAB can be a promising material to replace conventional PEDOT : PSS. It can be suspected that PLEDwith cross-linked d-PBAB would show longer lifetime compared with that of PLED with PEDOT : PSS, and thus further studies are under investigation.

  • PDF

An Investigation of the Overseas Project Core Factors of Public New Town Development Company (신도시개발 공기업의 해외시장 진출을 위한 핵심경쟁요소 고찰)

  • Jeon, Ji-Ho;Choi, Seok-Jin;Park, Sang-Hyuk;Han, Seung-Heon;Kim, Hyoung-Kwan
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • 2007.11a
    • /
    • pp.626-631
    • /
    • 2007
  • New town development project which has manifold operations is usually on a large scale and its spin-off spreads widely. Although international new town development market is widely increasing, new town development market in Korea is now decreasing. Thus, Korean public new town development company which has a lot of business experiences in local new town development market is now facing the necessity of making a foray. This study had a Focus Group Interview with people who experienced in international construction market to set up the core factors of international new town development market. After that, Importance Performance Analysis and Content Analysis were performed with questionnaire to determine the present condition of Korean public new town development company.

  • PDF

Effort Analysis of Unit Testing Conducted by Non-Developer of Source Code (원개발자 부재에 따른 원시코드 기반의 단위테스트 노력 분석)

  • Yoon, Hoijin
    • Journal of Information Technology Services
    • /
    • v.11 no.4
    • /
    • pp.251-262
    • /
    • 2012
  • Unit testing is one of the test levels, which tests an individual unit or a group of related units. Recently, in Agile Development or Safety-critical System Development, the unit testing plays an important role for the qualities. According to the definition of unit testing, it is supposed to be done by the developers of units. That is because test models for the unit testing refers to the structure of units, and others but its original developers hardly can understand the structures. However, in practice, unit testing is often asked to be done without the original developers. For example, it is when faults are revealed in customer sites and the development team does not exit any more. In this case, instead of original developers, other developers or test engineers take a product and test it. The unit testing done by a non-developer, who is not the original developer, would cause some difficulties or cause more cost. In this paper, we tests an open source, JTopas, as a non-developer, with building test models, implementing test codes, and executing test cases. To fit this experiment to practical testing situations, we designed it based on the practices of unit testing, which were surveyed through SPIN(Software Process Improvement Network). This paper analyzes which part of unit testing done by non-developers needs more effort compared to the unit testing done by original developers. And it concludes that Agile Development contributes on reducing the extra effort caused by non-developers, since it implements test codes first before developing source code. That means all the units have already included their own tests code when they are released.