• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1343-1354
• /
• 2022

Experiments were performed to measure the critical heat flux (CHF) on a vertical surface abutting a coarse packed bed of spherical particles. This geometry is representative of a CANDU reactor calandria tubesheet facing the end shield cavity during the in-vessel retention (IVR) phase of a severe accident. Deionized light water was used as the working fluid. Low carbon steel shielding balls with diameters ranging from 6.4 to 12.7 mm were used, allowing for the development of an empirical correlation of CHF as a function of shielding ball diameter. Previously published data is used to develop a more comprehensive empirical correlation accounting for the impacts of both shielding ball diameter and heating surface height. Tests using borosilicate shielding balls demonstrated that the dependence of CHF on shielding ball thermal conductivity is insignificant. The deposition of iron oxide particles transported from shielding balls to the heating surface is verified to increase CHF non-trivially. The results presented in this paper improve the state of the knowledge base permitting quantitative prediction of CHF in the CANDU end shield, refining our ability to assess the feasibility of IVR. The findings clarify the mechanisms governing CHF in this scenario, permitting identification of potential future research directions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.566-572
• /
• 2021

A methodology for the identification and coordinates estimation of air cavities under urban ground or sandy soil using its natural poles and natural resonant frequencies is presented. The potential of this methodology was analyzed. Simulation models of PEC (Perfect Electric Conductor)s with various shapes and dimensions were developed using an EM (Electromagnetic) simulator. The Cauchy method was applied to the obtained EM scattering response of various objects from EM simulation models. The natural poles of objects corresponding to its instinct characterization were then extracted. Thus, a library of poles can be generated using their natural poles. The generated library of poles provided the possibility of identifying a target by comparing them with the computed natural poles from a target. The simulation models were made assuming that there is an air cavity under urban ground or sandy soil. The response of the desired target was extracted from the electromagnetic wave scattering data from its simulation model. The coordinates of the target were estimated using the time delay of the impulse response (peak of the impulse response) in the time domain. The MP (Matrix Pencil) method was applied to extract the natural poles of a target. Finally, a 0.2-m-diameter spherical air cavity underground could be estimated by comparing both the pole library of the objects and the calculated natural poles and the natural resonant frequency of the target. The computed location (depth) of a target showed an accuracy of approximately 84 to 93%.

• Applied Microscopy
• /
• v.31 no.3
• /
• pp.223-233
• /
• 2001

The spermiogenesis of a Korean octopus, Octopus minor, inhabiting western of Korea Sea was observed by electron microscopy . The obtained results are as follows: The spermiogenesis of Octopus miner proceeds through four stages; early- , mid- , and late-spermatid, and mature sperm. An early spermatid is a spherical cell looking light due to the low electron density. The acrosome formed from Golgi complex of the upper nucleus looks dark due to the high electron density. The extra-nuclear rod (enr) stemming from proximal centriole is transformed from round shape into oval shape, elongating to the upper nucleus. In our observation, the axoneme was being formed from distal centriole, and the manchette composed of a number of microtubules is also found around nuclear membrane. In a mid-spermatid, chromatins in the nucleus contract shaping fine threads, and the manchette is also observed around nuclear membrane. Especially, the spherical acrosome is transformed into long oval one which is tinged with a number of horizontal stripes and has the middle electron density. In a late-spermatid, chromatins in the nucleus contract thick and short. Furthermore, the mitochondrial sleeve, in which the axoneme is surrounded with mitochondria, is observed at middle piece. The axoneme has a typical structure of 9+2 and around it, 9 coarse fibers are observed. Also in the acrosome cavity of mature sperm, horizontal striation is found. However, regularly spaced processes are peculiarly observed in there. A sperm is about 390 fm long, whose head is bent a little like a banana while the acrosome region is helical. In the middle piece of sperm, $11\sim12$ mitochondria are surrounding coarse fibers that reach the main piece of tail, while nothing but 9+2 structured axoneme is found in the end piece.

• Development and Reproduction
• /
• v.17 no.4
• /
• pp.369-377
• /
• 2013

The fertilized eggs of E. septemfasciatus are spherical and transparent with buoyancy at 790 to $890{\mu}m$ (average $821.8{\pm}2.0{\mu}m$) in diameter with 170 to $230{\mu}m$ oil globules (average $192.9{\pm}0.93{\mu}m$). Hatching began approximately 46 and 35 hours after fertilization at $22.0^{\circ}C$ and $25.0^{\circ}C$ water temperature, respectively. The average total length of newly hatched larvae was $1.75{\pm}0.03mm$. Most of the yolk and oil globules were absorbed within 3 to 4 days after hatching. The larvae reached 2.48 to 2.72 mm in total length, and their mouths and anuses opened at 3 to 4 days after hatching. In this time, the mouth diameters of the larvae were 0.209 to 0.238 mm. The larvae reached 3.24 to 4.15 mm in total length at 11 to 17 days after hatching, and began to metamorphose at the time the second dorsal and pelvic spines appeared and elongated. The abdominal cavity was densely lined with melanophores. The larvae reached 5.12 mm in total length at 24 days after hatching.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.10
• /
• pp.1499-1507
• /
• 2017

This paper presents an impact-based piezoelectric vibration energy harvester using a freely movable metal sphere and a piezoceramic fiber-based MFC (Macro Fiber Composite) as piezoelectric cantilever. The free motion of the metal sphere, which impacts both ends of the cavity in an aluminum housing, generates power across a cantilever-type MFC beam in response to low frequency vibration such as human-body-induced motion. Impacting force of the spherical proof mass is transformed into the vibration of the piezoelectric cantilever indirectly via the aluminum housing. A proof-of-concept energy harvesting device has been fabricated and tested. Effect of the indirect impact-based system has been tested and compared with the direct impact-based counterpart. Maximum peak-to-peak open circuit voltage of 39.8V and average power of $598.9{\mu}W$ have been obtained at 3g acceleration at 18Hz. Long-term reliability of the fabricated device has been verified by cyclic testing. For the improvement of output performance and reliability, various devices have been tested and compared. Using device fabricated with anodized aluminum housing, maximum peak-to-peak open-circuit voltage of 34.4V and average power of $372.8{\mu}W$ have been obtained at 3g excitation at 20Hz. In terms of reliability, housing with 0.5mm-thick steel plate and anodized aluminum gave improved results with reduced power reduction during initial phase of the cyclic testing.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.101-108
• /
• 1997

In repaired weldment of ASTM A-470 class 8 high pressure stream turbine rotor steel, creep rupture life was studied in relation with carbide morphology. Carbides were identified using carbide extraction replica method. A retired rotor has molybdenum rich carbide $M_2C$, lndacochea vanadium rich carbide $M_4C_3$, and chromium rich carbides $M_{23}C_6$and $M_7C_3$. Weldments ruptured at ICHAZ showed that some of carbides have been transformed into spherical types of coarsened carbides at ruptured area. Those carbides were revealed as molybdenum rich $M_6C$ carbide and they provided cavitation sites due to molybdenum depletion around $(M_6C)$ carbide. However coarsened $M_6C$ and $M_{23}C_6$ carbides were observed at ruptured area in case of ruptured at CGHAZ.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.3
• /
• pp.263-269
• /
• 2003

Morphological development of eggs, larvae and juvenile of the sunrise sculpin, Pseudoblennius cottoides were studed in the field and laboratory at the coastal Dolsan-do, Yeosu-shi from October, 2000 to April, 2001 Egg mass of Pseudoblennius cottoides in peribranchial cavity of Halocynthia hilgendorfi, were observed during late fall to winter in the study area. Fertiliged eggs were spherical in shape, demersal, adhesive, transparent and greenwish yellow color, measuring 1.84 mm (1.83-1.87 mm) in diameter. There were numerous and 17 (15-20) various-sized oil globules accounted in the yolk. Granular materials formed a mass in the yolk. Fertiliged eggs hatched at 301 hr 20 min after morula stage. Newly hatched larvae 6.31 mm (6.24-6.37 mm) in total length (TL), had a large yolk. At 3 days after hatching, the larvae, 6.77 mm (6.69-7.14 mm) in TL came out through the excurrent siphon of Halocynthia hilgendorfi. At 13 days after hatching, the larvae 12.59 mm (12.42-12.63 mm) in TL transformed to postlarval stage. At 32 days after hatching, postlarvae of TL 19.18 mm (19.01-19.46 mm) have reached the juvenile stage.

• ALGAE
• /
• v.30 no.1
• /
• pp.1-13
• /
• 2015

A new macroscopic riverine red algal species, Lemanea manipurensis sp. nov. (Batrachospermales) is described from Manipur in northeast India. It has a sparsely branched, pseudoparenchymatous thallus with a single, central axial filament that lacks cortical filaments. Spermatangia occur generally in isolated, low and indistinct patches or form an almost continuous ring around the axis. Carposporophytes project into the hollow thallus cavity without an ostiole. The most striking morphological feature is the carposporophyte with very short gonimoblast filaments having cylindrical, narrow and sparsely branched sterile filaments, the terminal cell of each branch with a single, large, elongate carpospore. The widely distributed L. fluviatilis has spherical carpospores in long branched chains. Phylogenetic analysis of rbcL sequence data and comparison with other Batrachospermales clearly show that our specimens do not align with other species of Lemanea and Paralemanea investigated thus far. Five specific names attributed in previous literature (1973-2014) to Lemanea from Manipur, L. australis, L. catenata, L. fluviatilis, L. mamillosa, and L. torulosa are rejected until critical anatomical and molecular evidence is available for specimens from the Manipur river systems. Taxa referable to Paralemanea were not confirmed for India in this study. In view of the high demand for food and medical uses of L. manipurensis in northeast India, conservation measures are needed for its long term survival. The present paper constitutes the first combined morphological / molecular study on a freshwater red alga from India.

• Geotechnical Engineering
• /
• v.13 no.4
• /
• pp.95-108
• /
• 1997

For normally consolidated clay, several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation However, depending on the assumptions and analytical techniques, it could considerably vary even for a specific degree of consolidation. In this paper, a method is proposed to determine a consistent coefficient of consolidation over all ranges of degree of consolidation by applying the concept of the Optimum Design Technique. The initial excess pore pressure distribution is assumed to be obtainable by the successive spherical cavity expansion theory. The dissipation of pore pressure is simulated by means of two dimensional linear-uncoupled axisymmetric consolidation analysis. The minimization of the differences between the measured and the predicted excess pore pressures was carried by BFGS unconstrained optimum design algorithm with one dimensional golden section search technique. By analyzing numerical and real field examples, it can be found that the adopted optimum technique gives a consistent and convergent results.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.128-138
• /
• 2002

1,3-Bis(2-chloroethyl)-1-nitrosourea (BCNU, Carmustine)-loaded poly(D, L-lactide-co-glycolide) (PLGA, lactide/glycolide mole ratio 75 : 25) microparticles were prepared and fabricated into wafers in an attempt to study the possibility for the treatment of malignant glioma by direct inserting the wafers to the tumor or the cavity remained after surgical resection of the tumor. SEM observation of the microparticles prepared by spray drying method revealed that the microparticles were spherical, i. e. microspheres. Significant reduction of the crystallinity of BCNU encapsulated in PLGA was confirmed by X-ray diffraction and differential scanning calorimetry analyses of the BCNU-loaded PLGA microparticles. Release pattern of BCNU was dependent on several preparation parameters, such as the molecular weight and concentration of PLGA, and initial BCNU loading amount, etc. In vitro release of BCNU was prolonged over 8 weeks with close to zero-order release pattern after initial burst effect. Observations of morphological change of wafers and pH change of release media during release test period confirmed that hydration and degradation of PLGA would be facilitated with an increase of BCNU-loading amount.